by Stephan John  , Svenja Rink  , Leandra Weidemann  , Katrin Huesker  and Wilhelm Niedermeier

Received: 21 April 2022;  Published: 15 June 2022;  doi: 10.21926/rpm.2202012

Combining dental ceramics with other prosthetic metallic restorations might release metal ions, thus affecting the oral tissues of the patients. In this study, we evaluated the electrochemical solubility of various dental ceramics in a galvanic experimental setup in vitro. Smooth and rough feldspathic and zirconium dioxide ceramics (at pH 5.5 and pH 3.0) were exposed to an electric field. Calcium, barium, and zirconium were selected as parameters to determine the solubility of both types of ceramic materials. Among [...]

by Dimitrios Dionysopoulos  , Olga Gerasimidou  and Constantinos Papadopoulos

Received: 01 May 2022;  Published: 01 June 2022;  doi: 10.21926/rpm.2202011

Glass ionomer cements (GICs) are dental materials that were invented by Wilson & Kent in 1972. They can chemically bond to enamel and dentin and can exhibit anti-cariogenic activity that allows the release and uptake of fluoride ions. They also possess the ability to render color. The setting reaction of GICs is a neutralization reaction that results in the formation of polycarboxylate salts. The most important GIC modification process involves the addition of resin components, resulting in the development of resin [...]

by Sabine Neusatz Guilhen  , Tamires Watanabe  , Thalita Tieko Silva  , Suzimara Rovani  , Júlio Takehiro Marumo  , Jorge Alberto Soares Tenório  , Ondřej Mašek  and Leandro Goulart de Araujo

Received: 19 April 2022;  Published: 19 May 2022;  doi: 10.21926/rpm.2202010

The point of zero charge (PZC) is an inherent electrokinetic property of biochars (BC). It influences the adsorption process under certain pH conditions. Herein, we report the method of determination of the PZC values of ten standard BCs. We used the salt addition method to select the BCs with suitable properties for methylene blue (MB) removal from aqueous solutions. The standard BCs were obtained by pyrolyzing five different biomasses at two distinct temperatures (550°C and 700°C). The BCs derived from rice husk [...]

by Trenton Cersoli  , Muneer Barnawi  , Kerry Johnson  , Edward Burden  , Frank Li  , Eric MacDonald  and Pedro Cortes

Received: 17 February 2022;  Published: 29 April 2022;  doi: 10.21926/rpm.2202009

Shape memory polymers (SMPs) are smart materials that can respond to certain thermal, chemical or electrical stimuli by inducing a structural conformation change into a temporary shape. In this work, a 3D printing process based on a Vat Photo-polymerization of a shape memory polymer (SMP) was investigated to produce customized smart and complex morphable antennas. The mechanical and material properties were examined through a tensile, flexural and rheological testing for different polymer mixture ratios. It was obs [...]

by Kai-Yang Liu  , Li-Xia Yin  , Xu Lin  and Shun-Xing Liang

Received: 20 March 2022;  Published: 21 April 2022;  doi: 10.21926/rpm.2202008

Biomaterials have always been the focus of material scientists and engineers. Titanium and its alloys have favorable properties, such as high strength, low density, good corrosion resistance, non-toxicity, low elastic modulus, biocompatibility, etc. Thus, Ti alloys have received much attention from scientists and engineers who work with biomaterials. Among these properties, the elastic modulus is a very important property for implant biomaterials because it avoids the “stress shielding” effect. In this study, we su [...]

by Recent Progress in Materials Editorial Office

Received: 11 April 2022;  Published: 14 April 2022;  doi: 10.21926/rpm.2202007

An Interview with Prof. Vincenzo M. Sglavo.

by Akash Dakhane  and Narayanan Neithalath

Received: 03 February 2022;  Published: 08 April 2022;  doi: 10.21926/rpm.2202006

The influence of different levels of alkalinity, expressed using M2O-to-binder ratio (n) and activator SiO2-to-M2O ratio (Ms), (M being the Na+ or K+ cation) on the reaction kinetics, compressive strength development and the reaction product formation in slag-based systems activated using alkali powders are discussed. The fundamental idea is to better understand one-part, “just-add-water” type alkali activated binders that are easy-to-use than the systems that rely on liquid activators. The difference in the behavi [...]

by Yaser Banadaki  , Nariman Razaviarab  , Hadi Fekrmandi  , Guoqiang Li  , Patrick Mensah  , Shuju Bai  and Safura Sharifi

Received: 24 November 2021;  Published: 28 February 2022;  doi: 10.21926/rpm.2201005

Additive Manufacturing (AM) is a crucial component of the smart manufacturing industry. In this paper, we propose an automated quality grading system for the fused deposition modeling (FDM) process as one of the major AM processes using a developed real-time deep convolutional neural network (CNN) model. The CNN model is trained offline using the images of the internal and surface defects in the layer-by-layer deposition of materials and tested online by studying the performance of detecting and grading the failure [...]

by Obinna Okolie  , Iwona Stachurek  , Balasubramanian Kandasubramanian  and James Njuguna

Received: 16 November 2021;  Published: 23 February 2022;  doi: 10.21926/rpm.2201004

There is a current need for tissue and organ repairs, replacement, and regeneration for patients who suffer from diseased or damaged tissues or organs. This situation is continuously on the rise and the supply of this form of therapy does not meet the patients demand mostly due to lack of donors and biocompatibility issues which causes immune system rejection of the implants. To succeed through these limitations, researchers are currently investigating the use of scaffolds as another approach for implants. The conv [...]

by Geeta Pokhrel  , Hongmei Gu  , Douglas J. Gardner  and Shane O'Neill

Received: 07 December 2021;  Published: 09 February 2022;  doi: 10.21926/rpm.2201003

This study is expanding the previous studies that were focused on the material properties and transportation costs of the two alternative feedstocks for manufacturing wood-plastic composites (WPCs): wood flour and pellets. Besides the material properties and cost analysis, life-cycle assessment (LCA) is equally important to assess the environmental impacts of these two alternative wood feedstocks to manufacture WPCs and gain the knowledge of influences from the manufacturing and transportation processes. The main g [...]

by Jeonghyeon Cheon  and Seunghyun Kim

Received: 21 October 2021;  Published: 25 January 2022;  doi: 10.21926/rpm.2201002

3D printing is an attractive method to fabricate microfluidic devices due to (1) its fast and simple process without specialized equipment and cleanroom environment, and (2) its capability to create complex 3D structures. Combined with Polydimethylsiloxane (PDMS), it can be used to develop various microfluidic devices taking advantage of both 3D printing and PDMS. In this paper, we investigated a Digital Light Processing (DLP) 3D printer to fabricate 3D printing/PDMS integrated microfluidic devices. We used it to f [...]

by Recent Progress in Materials Editorial Office

Received: 05 January 2022;  Published: 06 January 2022;  doi: 10.21926/rpm.2201001

The editors of Recent Progress in Materials would like to express their sincere gratitude to the following reviewers for assessing manuscripts in 2021. We greatly appreciate the contribution of expert reviewers, which is crucial to the journal's editorial process. We aim to recognize reviewer contributions through several mechanisms, of which the annual publication of reviewer names is one. Reviewers receive a voucher entitling them to a discount on their next LIDSEN publication and can download a certificate of re [...]

by Kamalakanta Sahoo  , Richard Bergman  and Poonam Khatri

Received: 24 August 2021;  Published: 21 December 2021;  doi: 10.21926/rpm.2104049

According to the United Nations Environment Programme (UNEP), the construction and operation of buildings accounted for nearly 38% of total global energy-related CO2 emissions in 2019. The construction sector has been striving to use more low-carbon footprint building products to mitigate climate change and enhance environmentally preferable purchasing. Over the last several decades, there has been substantial growth in engineered wood products for the construction industry. To assess these products used in constru [...]

by Pooam Khatri  , Kamalakanta Sahoo  , Richard Bergman  and Maureen Puettmann

Received: 18 June 2021;  Published: 15 December 2021;  doi: 10.21926/rpm.2104048

Raw materials for buildings and construction account for more than 35% of global primary energy use and nearly 40% of energy-related CO2 emissions. The Intergovernmental Panel on Climate Change (IPCC) emphasized the drastic reduction in GHG emissions and thus, wood products with very low or negative carbon footprint materials can play an important role. In this study, a cradle-to-grave life cycle assessment (LCA) approach was followed to quantify the environmental impacts of laminated strand lumber (LSL). The inven [...]

by Omar Alelweet  , Sara Pavia  and Zehao Lei

Received: 28 September 2021;  Published: 29 November 2021;  doi: 10.21926/rpm.2104047

This paper investigates the composition, properties and reactivity of a red mud waste generated in Saudi Arabia with a view to find alternative materials to replace construction binders of high environmental impact. The phase transformation triggered by the sintering of the RM up to 1000°C is determined with thermal and X-Ray Diffraction analyses. Reactivity is investigated with chemical and physical methods including the Chapelle test, setting times, mechanical index and microscopy. The RM is clearly pozzol [...]

by Carol Tran  and Laurence J. Walsh

Received: 28 September 2021;  Published: 26 November 2021;  doi: 10.21926/rpm.2104046

Subsurface remineralization can be promoted by the topical application of nanoparticles of casein phosphopeptide-amorphous calcium phosphate (CPP-ACP). To assess changes in enamel white spot lesions, an in situ proof-of-concept investigation was performed using 5 subjects (all of whom were healthy young adults) with a cross-over study design. Custom orthodontic brackets were attached to the buccal surfaces of the maxillary second premolar and first molar teeth. Each bracket had a recess that held a slab of enamel w [...]

by Michelle Szucs  , Miguel Angulo  , Carlos Costa  and Mª Carmen Márquez

Received: 12 May 2021;  Published: 08 November 2021;  doi: 10.21926/rpm.2104045

Five different commercial proteases (Alcalase 2.4L, Flavourzyme 1000L, Neutrase, Protamex, and PTN) were evaluated for the simultaneous recovery of protein and lipids through hydrolysis. The hydrolysis reaction was monitored using the pH-stat procedure, in which samples were collected after 240 min of hydrolysis using each enzyme. The samples were analyzed for the degree of hydrolysis, protein hydrolysate, collagen, lipids, and fatty acids. A clear relationship was observed between the degree of hydrolysis and the [...]

by Yang Zhang  , Jiawen Chen  , Xiaowen Hu  , Wei Zhao  , Dirk J. Broer  and Guofu Zhou

Received: 17 August 2021;  Published: 01 November 2021;  doi: 10.21926/rpm.2104044

The reverse mode polymer dispersed liquid crystal (PDLC) is an emerging smart window technology. Unlike traditional PDLCs, a reverse mode PDLC can be transparent and opaque in the absence and presence of an external electric field. This report provides a brief introduction to several reverse modes PDLC smart window technologies, focusing on polymer-stabilized liquid crystals (PSLCs). The systems based on electrohydrodynamic instability (EHDI) of liquid crystals have also been discussed. The working principles, mode [...]

by Alla V. Balueva  , Ilia N. Dashevskiy  and Patricia Todebush

Received: 12 May 2021;  Published: 27 October 2021;  doi: 10.21926/rpm.2104043

One of the ways to improve the fusion of an implant with bone tissue is through the use of biocompatible coatings, in particular, hydroxyapatite (HAp). It is important to assess the strength of the HAp adhesion to the implant. The measure of the strength of the bond of the coating with the substrate is the energy of this bond. Using density functional theory and molecular dynamics, the reaction path, reaction products, oscillation frequency, activation energy and bond energy between different combinations of compon [...]

by Roland Pässler

Received: 17 June 2021;  Published: 22 November 2021;  doi: 10.21926/rpm.2104042

The well-known classical heat capacity model developed by Debye proposed an approximate description of the temperature-dependence of heat capacities of solids in terms of a characteristic integral, the T-dependent values of which are parameterized by the Debye temperature, ΘD. However, numerous tests of this simple model have shown that within Debye's original supposition of approximately constant, material-specific Debye temperature, it has little chance to be applicable to a larger variety of non-metals, e [...]

by Omar Alelweet  and Sara Pavia

Received: 09 June 2021;  Published: 13 October 2021;  doi: 10.21926/rpm.2104041

Alkali activated (AA) materials have been investigated for decades as an alternative to Portland cement (PC) products. Most consist of a silicate waste activated with alkalis, which leads to lower green-house gas emissions and a substantial drop in the use of unrenewable material resources. This paper studies the durability of AA materials made with a ground granulated blast furnace slag (GGBS) from Dublin, activated with sodium hydroxide (NaOH), and sodium silicate (Na2SiO3), both combined and separately, and cure [...]

by Pal S. Mangat  , Shahriar Abubakri  , Konstantinos Grigoriadis  and Vincenzo Starinieri

Received: 24 June 2021;  Published: 09 October 2021;  doi: 10.21926/rpm.2104040

Microwave curing of repair patches provides an energy efficient technique for rapid concrete repair. It has serious economic potential due to time and energy saving especially for repairs in cold weather which can cause work stoppages. However, the high temperatures resulting from the combination of microwave exposure and accelerated hydration of cementitious repair materials need to be investigated to prevent potential durability problems in concrete patch repairs. This paper investigates the time and magnitude of [...]

by Bhuamik Patel  , Yeswanthi Kamineni  , Shashank Gorityala  and M Hima Bindu

Received: 19 August 2021;  Published: 28 September 2021;  doi: 10.21926/rpm.2103039

Dental caries are one of the major causes of oral degeneration diseases. In order to treat dental-related diseases, it is often challenging and expensive. Recent literature has reported many advances in designing delivery systems utilizing polymers and novel biomaterials. Polymers play an important role in designing many nanoformulations like liposomes, polymeric micelles, polymeric nanoparticles, carbon-based nanoparticles, nano-hydroxyapatite, iron oxide, zirconia, silica, and silver nanoparticles were used to tr [...]

by Khaled Hassan  , Ian Sims  , Murray Reid  , Alex Smith  and Mohammed Al-Kuwari

Received: 18 April 2021;  Published: 26 September 2021;  doi: 10.21926/rpm.2103038

Wadi gravel is a local aggregate in Qatar that could contribute to enhanced sustainability by replacing expensive imported gabbro. The material needs to be processed before use to reduce sulfate content to acceptable levels. The paper presents the performance assessment of three full-scale buildings, variously made with 50% and 100% Wadi gravel and conventional gabbro concretes. Site monitoring up to four years in service demonstrated the strength development with age and resistance to the aggressive exposure condi [...]

by Selvaraju Sivamani  , Rajoo Baskar  and Balasubramanian Lakshmi

Received: 29 April 2021;  Published: 14 September 2021;  doi: 10.21926/rpm.2103037

One of the crucial steps in the enzymatic hydrolysis of biomass is pretreatment. We investigated the applicability of a hybrid pretreatment method, This involved acid treatment followed by alkali before the production of fermentable sugars from cassava stem. The substrate was initially treated with acid (1% oxalic acid at 100 °C for 2 h), followed by treatment with a 10% NaOH–urea mixture (by mixing 5 g each of NaOH and urea in 100 mL of water) at 100 °C for 1 h. A cellulose recovery of 98.55% was obtained with the [...]

by O.A. Kornienko  , S.V. Yushkevych  , A.V. Sameljuk  and O.R. Andrievskaya

Received: 24 May 2021;  Published: 02 September 2021;  doi: 10.21926/rpm.2103036

The phase equilibria and structural transformations in the ternary ZrO2-CeO2-Eu2O3 system at 1500 °C were studied by X-ray diffraction and scanning electron microscopy in the overall concentration range. The system was found to constitute fields of solid solutions based on the tetragonal (T) modification of ZrO2, cubic (C) and monoclinic (B) modifications of Eu2O3, cubic with a fluorite-type structure (F) modifications of CeO2 (ZrO2), and ordered intermediate phase with a pyrochlore-type structure of Eu2Zr2O [...]

by Athanasia Soultana  , Michael Galetakis  , Anthoula Vasiliou  , Konstantinos Komnitsas  and Despina Vamvuka

Received: 11 February 2021;  Published: 17 August 2021;  doi: 10.21926/rpm.2103035

Waste concrete is the most predominant constituent material among construction and demolition waste. Current waste concrete recycling is limited to the use of recycled concrete aggregates as a road-base material and less as aggregates in new concrete mixes. Further, the production of recycled concrete aggregates results in the generation of a high amount of fines, consisting mainly of cement paste particles. Hence, this study aims to produce the cement mortars using the upgraded recycled concrete aggregates (sand g [...]

by Sydney Katras  , Dejian Ma  , Ayman al Dayeh  and David Tipton

Received: 31 March 2021;  Published: 12 August 2021;  doi: 10.21926/rpm.2103034

Bisphenol A (BPA) is a widely used synthetic compound that has been identified as an endocrine disruptor. It has been linked to adverse health effects such as developmental defects, infertility in both men and women, cardiovascular disease, and obesity. There has been increased interest in BPA’s effects on the developing fetus and data has revealed that doses below the presumed safe dose can produce harmful effects. Orthodontic clear aligner therapy is a popular treatment modality that involves the patient we [...]

by Layachi Guelmine  and Hadda Hadjab

Received: 27 March 2021;  Published: 09 August 2021;  doi: 10.21926/rpm.2103033

The present study investigated the effect of reused rubber particles (RRP) on the deicer salt durability of ordinary concrete. Four mixtures were designed, a control concrete (CC) and three other rubber concretes obtained by partial substitution of natural dune sand aggregate with reused rubber particles with 0%, 3%, 6%, and 9% w/w. All studied concretes were subjected to the combined effect of freeze/thaw (56 and 120) cycles with the deicer salt solution of 3% NaCl. The results indicated that RRP improved the deic [...]

by Mônica Batista Leite  and Paulo Roberto Lopes Lima

Received: 07 March 2021;  Published: 28 July 2021;  doi: 10.21926/rpm.2103032

The production of concrete using recycled aggregates, obtained from the processing of construction and demolition waste, is extensively practiced worldwide. However, the effect of simultaneous adding fine recycled aggregate and the recycled coarse aggregate on the mechanical properties of concrete is still unfamiliar. This work aims to evaluate the influence of the water/cement ratio (WC Ratio), the fine recycled aggregate content (%FRA), the coarse recycled aggregate content (%CRA), as well as the interaction betw [...]

by Julia Tourtelot  , Ann Bourgès  and Emmanuel Keita

Received: 09 March 2021;  Published: 26 July 2021;  doi: 10.21926/rpm.2103031

Currently, the largest among the earth excavation sites in Europe are located in the Paris region. The soils excavated from these sites are often considered waste and are not valorized. With an increasing focus on sustainable development, the demand for low-carbon building materials is rising. Although construction using raw earth is a vernacular technique, the diversity in the behavior of the raw earth building materials warrants better control of their mechanical properties. The construction techniques differ dep [...]

by Laila Midhat  , Naaila Ouazzani  , Abdessamed Hejjaj  , Ahmed Ouhammou  and Laila Mandi

Received: 29 December 2020;  Published: 22 July 2021;  doi: 10.21926/rpm.2103030

This study aimed to assess the effectiveness of the phytostabilization ability of the native Moroccan plant Citrullus colocynthis on the neutralization of soil acidity and stabilization of metallic trace elements (MTEs) assisted by marble waste. Mine tailings (MT) collected from an abandoned polymetallic site were mixed with powdered marble (PM) using different mixing ratios (%): (MTPM25), (MTPM50), (MTPM75), and agricultural soil (AS) acting as the control. Seeds of C. colocynthis were selected and planted under g [...]

by Fahriye Yagmur Bütün Buschalsky  and Carsten Mai

Received: 15 March 2021;  Published: 22 July 2021;  doi: 10.21926/rpm.2103029

A thermo-hydrolytic disintegration process qualifies as a promising option for recycling the waste MDF and preserving the fibrous morphology of the recovered lignocellulosic fibre material. This study aims to include a drainage process between the thermo-hydrolytic disintegration and the further utilization of the recovered fibres (RF) obtained using a screw press for removing the disintegration water (DW). In this context, the chemical properties of the RF (pH, nitrogen content, formaldehyde emissions) and the DW [...]

by Lucy V. Fisher  and Andrew R. Barron

Received: 24 February 2021;  Published: 16 July 2021;  doi: 10.21926/rpm.2103028

One of the largest problems facing the steelmaking industry is the high amount of waste currently produced and the low amount of waste that is currently recycled. This study aims to look at the suitability of 3 different samples of basic oxygen steelmaking (BOS) slag as a construction material, in concert with their carbon capture capacity. Characterization by scanning electron microscopy (SEM), X-ray diffraction (XRD), inductively coupled plasma spectroscopy (ICP), X-ray fluorescence (XRF), CO2 adsorption analysis [...]

by Andrea P. Cuevas-Gómez  , Izlia J. Arroyo-Maya  and Humberto Hernández-Sánchez

Received: 26 April 2021;  Published: 22 June 2021;  doi: 10.21926/rpm.2102027

Whey protein is a byproduct of cheese, casein, and Greek yogurt produced in Europe, North America, and Australasia. It is a substantial source of functional proteins and peptides for the worldwide food industry. α-Lactalbumin (α-La) is a globular protein that can be isolated from WPI (whey protein isolates) using techniques such as chromatography/gel filtration, membrane separation, etc. α-La is used in the elaboration of functional foods and is a very good source of peptides with anticancer, antimicrobial, antivir [...]

by Herinjaka Haga Ratsimbazafy  , Aurélie Laborel-Préneron  , Camille Magniont  and Philippe Evon

Received: 26 March 2021;  Published: 20 June 2021;  doi: 10.21926/rpm.2102026

The use of plant aggregates obtained from agricultural co-products mixed with mineral binders to form eco-friendly insulating building materials has been initiated for a few years to bring environmentally friendly solutions to the construction sector. Several studies on different agro-resources have already been carried out, providing various information about the properties of plant aggregates and plant-based concrete. However, the characteristics of the agricultural co-product, which allow it to qualify as a plan [...]

by Sam T Briggs  , Mary Beth B Monroe  , Mark A Weizbicki  , Sayyeda Marziya Hasan  and Duncan J Maitland

Received: 05 April 2021;  Published: 25 June 2021;  doi: 10.21926/rpm.2102025

Shape memory polymers (SMPs) are highly attractive materials for medical devices. Specifically, SMP foams are currently being used as embolic devices in peripheral and cerebral vascular applications. To ensure the proper function and safety of these materials in their intended applications, it is important to understand how processing treatments, such as aging, sterilization, and foam composition can influence their degradation. Here, SMP foams were treated with industry relevant processing parameters, and the infl [...]

by Mariusz KSIĄŻEK

Received: 24 March 2021;  Published: 15 June 2021;  doi: 10.21926/rpm.2102024

Metal parts of endoprosthesis have a detrimental effect on the bones that come into contact with them and on the entire body of the patient. Coating them with biocompatible layers (hydroxyapatite and bioglass) has not yet brought about permanent results. In this study, the author showed the possibility of using a binder containing sulfur waste for this purpose. The sulfur binder is used industrially in electrical engineering and construction applications. The chemical properties of elemental sulfur indicate that it [...]

by Krzysztof Wierzcholski

Received: 08 October 2020;  Published: 02 June 2021;  doi: 10.21926/rpm.2102023

This paper aims to highlight the result of a new progression of mathematical estimation methods of stochastic bio-hydrodynamic lubrication parameters for arbitrary, curvilinear, non-rotational, co-operating, living biological surfaces coated with phospholipid bi-layers. Movable, non-rotational, co-operating surfaces occur in various biological friction nods like the collar bone, the blade bone, the jump joint, and the wrist joint. Specifically, the author presents a synthetic and comprehensive estimation of stochas [...]

by Pithchai Pandian Sivakumar  , Elke Gruyaert  , Nele De Belie  and Stijn Matthys

Received: 09 March 2021;  Published: 02 June 2021;  doi: 10.21926/rpm.2102022

Depending on the availability of aggregate sources pertaining to their geographic locations, the concrete industry utilizes conventional aggregates such as marine sand, dredged gravel, or crushed rocks. This method requires high energy and high processing costs for washing and grinding. The objective of this work is to use Modified Ferro silicate slag (MFS), a by-product obtained from the copper industry, as an alternative to the conventional fine aggregates found in mortar. No additional processing such as washing [...]

by Doo-Sung Lee

Received: 09 December 2020;  Published: 02 June 2021;  doi: 10.21926/rpm.2102021

This paper concerns a poroelastic half-space in which plane compressional waves are scattered by a spherical inclusion. Addition theorems for the spherical wave functions are utilized to meet the boundary conditions on the plane, and the satisfaction of the given conditions on the boundary of the sphere leads to three infinite series equations, whose solution can be acquired by successive approximations. Further, its existence and uniqueness are discussed.

by Christopher Wilson  , Anthenius Versluis  , Daranee Tantbirojn  and Martha Wells

Received: 10 February 2021;  Published: 28 May 2021;  doi: 10.21926/rpm.2102020

Prefabricated zirconia crowns (ZRCs) require a passive fit and more reduction than stainless steel crowns (SSC). To determine the mean and maximum reduction depths in the mesial-buccal and occlusal areas for three ZRC brands and one SSC in posterior primary typodont molars and to compare reduction depths to existing literature to determine the preparation’s proximity to pulpal tissue. Four primary maxillary and mandibular typodont teeth (J and S) were prepared according to the manufacturers’ guidelines for three ZR [...]

by Chris R. Lavers

Received: 29 December 2020;  Published: 14 May 2021;  doi: 10.21926/rpm.2102019

Advanced optical stealth techniques are of growing importance in the role of manned and unmanned aircraft or ship platforms. We consider here the concept of using passive reflective display elements rather than high power active light projection to achieve a low observable camouflaged ship platform. This paper presents practical consideration towards minimal radiated power user-driven requirements using adaptive liquid crystal electro-optical methods. Optical reflectivity for a multi-layer liquid crystal cell struc [...]

by Sampo Mäkikouri  , Sirje Vares  , Kirsi Korpijärvi  and Nikolaos Papakonstantinou

Received: 12 January 2021;  Published: 13 May 2021;  doi: 10.21926/rpm.2102018

Climate change has been identified as one of the biggest issues plaguing human life at present. Hence, immense attention is being paid to developing methods that can potentially reduce carbon dioxide emission. With the help of carbon-negative concrete, manufactured from alternative binders and cured with waste carbon dioxide, a major part of the manufacturing industries that emit carbon dioxide can be potentially turned into a carbon sink. In this study, the waste material streams in Finland, suitable for disposing [...]

by Pei-Yu Wu  , Kristina Mjörnell  , Claes Sandels  and Mikael Mangold

Received: 22 January 2021;  Published: 11 May 2021;  doi: 10.21926/rpm.2102017

Assessment of the presence of hazardous materials in buildings is essential for improving material recyclability, increasing working safety, and lowering the risk of unforeseen cost and delay in demolition. In light of these aspects, machine learning has been viewed as a promising approach to complement environmental investigations and quantify the risk of finding hazardous materials in buildings. In view of the increasing number of related studies, this article aims to review the research status of hazardous mater [...]

by Aurélie Laborel-Préneron  , Paulina Faria  , Jean-Emmanuel Aubert  and Camille Magniont

Received: 12 March 2021;  Published: 07 May 2021;  doi: 10.21926/rpm.2102016

Bio-based earth composites present various environmental benefits, such as usable wastes, coproducts, abundant or renewable materials, etc. Moreover, the incorporation of bioaggregates in the earth matrix allows the buildings to act as an effective carbon sink. A growing number of studies are now focusing on the mechanical and hygrothermal properties of bio-based earth building materials. However, the durability of these types of material is a major concern, and knowledge of their various aspects is essential to an [...]

by Carlos A. Echeverry-Gonzalez  and Vladimir V. Kouznetsov

Received: 01 December 2020;  Published: 28 April 2021;  doi: 10.21926/rpm.2102015

The design of nanomaterials for application in diverse fields ranging from photovoltaic to fluorescence sensing is a research area of increasing interest. Recently, Quantum Dots (QDs), which are classified as semiconductor quantum dots (SQDs) and Carbon dots (CDs), have become a hot topic of investigation, owing to their extraordinary tunable fluorescence emission properties that render them excellent candidates for sensing metal ions. The detection of metal ions in aqueous solutions with high sensitivity is very i [...]

by CT Valliappan  , J Joyson Joe Asir  , V Subashri  , V Vaishnavi  and I Anand Sherwood

Received: 28 December 2020;  Published: 27 April 2021;  doi: 10.21926/rpm.2102014

Furcal perforation management in root canal retreatment is often challenging as the outcome of the perforation sealing depends on several parameters. The recent introduction of several bioactive cements and magnification systems has made the sealing of perforations easier and the outcome more predictable. This study highlights the clinical outcomes of furcal perforation management in root canal retreatment using biodentine.

by Sofía Albolafio  , María I. Gil  , Ana Allende  and Epameinondas Xanthakis

Received: 02 December 2020;  Published: 21 April 2021;  doi: 10.21926/rpm.2102013

The present study aimed to characterize wastewater fractions obtained after the wet extraction of proteins from legumes. In addition, the suitability of wastewater fractions for the potential recovery of high value-added compounds was also examined, and consequently, the prevention of the environmental impact of these wastes was explored. Similar to the industrial production of proteins, wet alkaline and acidic extractions of proteins from faba bean and pea flours were performed in two stages of extraction. The dif [...]

by Eugene Stephane Mananga

Received: 26 December 2020;  Published: 13 April 2021;  doi: 10.21926/rpm.2102012