A New Model for the Shear of Atomic PlanesAbstract The article presents a model that describes the shear of atomic planes in crystalline solids by accounting for their electronic structure. Previous studies have shown that an isotropic distribution of valence electrons leads to a spherically symmetric interatomic potential, which affects the stabili [...] 127 378 |
Acknowledgment to Reviewers of Recent Progress in Materials in 2025Abstract The editors of Recent Progress in Materials would like to express their sincere gratitude to the following reviewers for assessing manuscripts in 2025. We greatly appreciate the contribution of expert reviewers, which is crucial to the journal's editorial process. We aim to reco [...] 369 886 |
Rapid Green Synthesis of Silver Nanoparticles and Alginate-Silver Nanocomposite Beads Using Mashmoom (Ocimum basilicum), a Bahraini Household Medicinal HerbAbstract The study focuses on the rapid green synthesis of silver nanoparticles (AgNPs) and alginate-silver nanocomposite (Alg-AgNc) beads using sweet basil or Mashmoom (Ocimum basilicum), a common household medicinal herb in Bahrain. The aqueous extract of mashmoom was used as a reducin [...] 582 2041 |
Deep Learning Approaches for Predicting Strain Energy in Heterogeneous MaterialsAbstract This paper investigates data-driven strain energy prediction for heterogeneous elastic materials using the Mechanical MNIST benchmark dataset (60,000 28 × 28 stiffness maps by precomputed finite-element results). The results by classical regression models (linear regression, random forest, and gradi [...] 755 2774 |
Effect of EVA on the Unnotched Impact Toughness of PP/HDPE/EVA Blendsby
Duc Duy Huynh
,
Hoang Phuc Nguyen
,
Tran Quoc Thang Nguyen
,
Thi Hong Nga Pham
,
Quan Anh Pham
,
Thi Van Anh Duong
,
Van Huong Hoang
,
Xuan Tien Vo
and
Vinh Tien Nguyen
Abstract Beverage bottle caps are usually made from two primary materials: PP and HDPE. In this study, the evaluation criteria were the unnotched impact toughness and the microstructure of PP/HDPE/EVA samples produced by injection molding. The samples were tested according to ASTM D256. PP/HDPE/EVA blends we [...] 967 4505 |
Bioremediation of Organic Compounds and Trace Metals from Landfill Leachate Using Lactobacillus kefiri Strains: A Sustainable Approach Based on Facultative Treatmentby
Yasmin Cherni
,
Ridha Elleuch
,
Cristian Botta
,
Luca Cocolin
,
Amjed Kallal
,
Ismail Trabelsi
and
Lobna Elleuch
Abstract The sustainable management of water resources is increasingly recognized as a critical component of environmental conservation and socio-economic development. Among the most challenging aspects of wastewater treatment is the effective remediation of landfill leachate, a complex and highly polluted e [...] 682 3428 |
Effect of Oil Palm Broom Fiber on the Mechanical Properties of Rice Husk Ash–Blended ConcreteAbstract The high carbon footprint of cement production and the cost and environmental impact of steel reinforcement make conventional concrete unsustainable for long-term use. Reducing cement consumption and identifying sustainable, cost-effective alternatives to steel are critical for lowering construction [...] 2730 11667 |
Quantum Diamonds and the Future of Advanced Processors, Review on Benefits and ChallengesAbstract Nowadays, the development of advanced processors plays a key role in the progress of humanity and the discovery of new sciences, and quantum computers play an essential role in this regard. In this regard, the development of new generation processors is necessary for the development of quantum compu [...] 3362 11805 |
An Overview of Circular Economy Approaches for PlasticsAbstract Plastic pollution has received worldwide attention due to its extensive environmental and health implications. The circular economy has emerged as a potential solution to plastic pollution. This overview comprehensively presents different plastic circular economy approaches and discusses their advan [...] 2742 26060 |
Development of Parametric Voronoi-Based Scaffolds for Trabecular Bone Tissue Replacement Using Additive Manufacturingby
Gabriel de Souza Vieira Bié
,
Zilda de Castro Silveira
,
Rafael Vidal Aroca
and
Marcia Cristina Branciforti
Abstract Tissue engineering is a technique for regenerating living tissue using portions of the patient's tissue, which are dissociated into cells and cultured on biological or synthetic supports before being transferred to the patient. In this context, the present study seeks to develop implant models (scaf [...] 1150 6420 |
Emerging Progress in Nanotechnological Influence on Polymeric Textile Finishingby
Obumneme Emmanuel Ezeani
,
Christopher Igwe Idumah
,
Ifeanyi Emmanuel Okoye
and
Chioma Joan Ikebudu
Abstract Nanotechnology has revolutionized the textile industry by introducing innovative finishing techniques that enhance the durability and performance of textile materials and the application of nanoscale/nanoparticles/nanomaterials and processes to improve the properties and performance of textiles. The [...] 2517 20398 |
Quantitative Evaluations on Harmonic and Anharmonic Lattice Thermal Capacity of PolymersAbstract So-called ‘Generalized Skettrup Model(s)’ (GSMs) of different (1D, 2D, 3D) spatial dimensionalities are used at simulations on temperature-dependent harmonic and anharmonic fractions of lattice thermal capacity of polyethylene and polypropyle [...] 826 4774 |
Graphene Quantum Dots from Synthesis to Innovation for Advanced Optics and Bio-Optics TrendsAbstract The generation of non-classical light with improved performances within tiny sizes, intervals of lengths, and diameters is still a challenge. The generation of variable wavelengths associated with different frequencies of energy modes produced from new sources of emitters within confined scales from [...] 2148 9876 |
A Review on Metal Additive Manufacturing - Types, Applications and Future Trendsby
Muhammad Qasim Zafar
,
Ramisha Sajjad
,
Muhammad Tuoqeer Anwar
,
Muhammad Salman Mustafa
,
Naveed Husnain
,
Anas Bin Aqeel
and
Muhammad Bilal Khan
Abstract Metal Additive Manufacturing (MAM) process has been established as an industrial process for customized and intricate metallic components. It is one of the growing technologies proving its potential in numerous fields by introducing the latest processing methods. The significant growth in this techn [...] 5763 57507 |
Emerging Advances in 3-D & 4-D Printing of Polymeric Nanoarchitectures & Multifacet ApplicationsAbstract 3-Dimension printing (3-DPT) or additive manufacturing (AM) technology has been utilized for a while in the construction of customized 3-D objects utilizing computer software such as computer-aided design (CAD). However, the emergence of an innovative and new four-dimensional printing (4-DPT) has en [...] 2189 7974 |
Novel In-Situ Synthesis Techniques for Cellulose-Graphene Hybrids: Enhancing Electrical Conductivity for Energy Storage ApplicationsAbstract This study investigates the hypothesis that diverse synthesis techniques can yield cellulose-graphene hybrids with tailored properties for specific applications, enabling advancements in flexible electronics, energy storage, environmental remediation, and biomedical devices. We examined and compared [...] 3557 13571 |
Recent Developments in Synthesis Techniques and Microwave Absorption Performance of Materials Based on Molybdenum Disulfide (MoS2) with Metal Oxides: A Reviewby
Yusuf Sani
,
Raba’ah Syahidah Azis
,
Ismayadi Ismail
,
Yazid Yaakob
,
Chen Soo Kien
,
Mohd Mustafa Awang Kechik
and
Lim Kean Pah
Abstract The widespread usage of various wireless equipment in many facets of life has significantly contributed to the severe pollution caused by electromagnetic radiation. Thankfully, scientists have created materials that can absorb microwave radiation and convert dangerous electromagnetic waves into othe [...] 2903 18750 |
Valorization of Agroindustrial Waste as Biosorbent of Lead (II) in Solution and its Reuse in the Manufacture of Building Bricksby
Melisa S. Romano
,
Valeria Corne
,
Ricardo R. Azario
,
Emiliano Centurión
and
María del Carmen García
Abstract Lead is a non-biodegradable toxic heavy metal. Biosorption is a simple, cost-effective and eco-friendly method for remediating lead-contaminated environments. Additionally, rice husk is a highly available residual biomass that can be used as a biosorbent. This study aimed to analyze the biosorption [...] 1007 4972 |
Acknowledgment to Reviewers of Recent Progress in Materials in 2024Abstract The editors of Recent Progress in Materials would like to express their sincere gratitude to the following reviewers for assessing manuscripts in 2024. We greatly appreciate the contribution of expert reviewers, which is crucial to the journal's editorial process. We aim to reco [...] 695 3356 |
Construction & Demolition Waste and Circular Economy: The Case Study of a Brazilian CityAbstract Construction and demolition waste (CDW) is a significant waste stream in Brazil. It represents 38.2% of the total CDW and MSW streams. The recycling of CDW in Brazil is estimated to be at least 7.2% by weight (collected CDW) or about 15% by volume (produced CDW). Therefore, only a tiny part of CDW i [...] 1885 15382 |
Mechanical Characterization of a Tunable 3-D Collagen-Hyaluronic Acid Hydrogel for Use in Cell Cultureby
Jared Tucker
and
Victor Lai
Abstract Many cells demonstrate variances in behavior due to their cell culture environment. To provide a mechanically-tunable, tissue-like environment, a 3D hydrogel for cell culture was formulated using collagen (Col) and hyaluronic acid (HA) to help provide a system for studying these dynamic cellular res [...] 1222 7127 |
Viral/Non-Viral Vectors in DNA/RNA Delivery TechnologyAbstract Viral and non-viral vectors for nucleic acids (DNA/RNA) therapeutics are important in development of pharmaceutical industries. Although viral vectors have shown significant impact in transfection of DNA/RNA, but numerus studies have shown that non-viral vectors are also effective for the safe and t [...] 1882 8029 |
Current Advancements in the Behavior Analysis of EPDM Elastomers in Peripheral Applications of the Cathodic Side of PEMFC Systemsby
Daniel Foltuț
and
Viorel-Aurel Șerban
Abstract This review examines the latest developments in the study of how Ethylene Propylene Diene Monomer (EPDM) elastomers behave in peripheral applications of Proton Exchange Membrane Fuel Cells (PEMFCs), specifically on the cathodic side. The review highlights the crucial role of EPDM in maintaining the [...] 1345 10337 |
Research Progress in Enhancing Proton Conductivity of Sulfonated Aromatic Polymers with ZIFs for Fuel Cell ApplicationsAbstract The escalating global temperatures and their adverse effects underscore the growing imperative for the widespread adoption of clean fuels, notably hydrogen. Proton Exchange Membrane Fuel Cells (PEMFC) emerge as a pivotal green energy technology, facilitating electricity and water generation. The opt [...] 1660 12141 |
Emerging Trends in Engineering Polymers: A Paradigm Shift in Material EngineeringAbstract Emerging Trends in Engineering Polymers signify a pivotal transformation in material engineering, marking a departure from traditional materials towards innovative, multifunctional, and sustainable polymers. This review delineates the forefront of advancements in polymer materials, inclu [...] 4436 40978 |
Revolutionizing Infrastructure Development: Exploring Cutting-Edge Advances in Civil Engineering Materialsby
Michael Toryila Tiza
,
Samson Imoni
,
Ebenezer Ogırıma Akande
,
Onyebuchi Mogbo
,
Victoria Hassana Jiya
and
Collins Onuzulike
Abstract This study addresses the evolving challenges in infrastructure development by exploring recent advancements in civil engineering materials. The problem lies in the limitations of traditional materials such as concrete and steel, which, wh [...] 2127 12811 |
Nanomedicine: Pioneering a New Frontier in Neuro-OphthalmologyAbstract Nanotechnology is one of the most promising fields of study, and it represents a pioneering leap in science and technology by the precise control over materials at the atomic and molecular level. This transformation affects numerous aspects of modern human life, including medicine, healthcare, elect [...] 1636 7805 |
Obtaining of WC–Co- and WC–TiC–Co-Based Ultradispersive Alloys Modified with B4C–TiB2 QuasieuteticAbstract Tungsten carbide WC-based materials characterized by high hardness and wear resistance have long been widely used in manufacturing cutting and mining tools. They are alloyed or modified with different ceramic phases to improve operational characteristics further. There are o [...] 1699 12466 |
Influence of Thermal Environment Conditions on Mechanical Properties of MEX Printed 17-4 PH Stainless Steelby
Bruno Schubert
and
David Hochmann
Abstract This study investigates the influence of thermal environmental conditions during printing and their effects on the mechanical properties of material extrusion (MEX) 3D-printed 17-4 PH stainless steel. Various ambient temperatures and cooling behaviors were used during the printing process of the ten [...] 887 6123 |
Sustainable Concrete with Zero Carbon Footprintby
Ahmed Alawais
and
Roger P West
Abstract This paper describes a method to use solely recycled and by-product materials as constituents to form concrete that can be used in buildings structural applications. As concrete is one of the most important materials in human civilization, where it is used widely in construction, cement and aggregat [...] 1238 9974 |
Construction and Evaluation of a Modular Anthropomorphic Phantom of the Skull with an Exchangeable Specimen Jar to Optimize the Radiological Examination of Temporal Bone Pathologyby
Malin Vestin Fredriksson
,
Love Kull
,
Anton Rönnblom
,
Lennart Flygare
,
Diana Berggren
and
Krister Tano
Abstract To develop a modular anthropomorphic phantom to evaluate the performance of radiological techniques for detecting pathologies in the temporal bone region. A phantom was constructed using a human skull, temporal bone specimen, and 3D-printed contour of a human skull. The human skull was embedded in t [...] 1026 5169 |
Impact of Pernicious Chemicals on Geopolymer and Alkali-Activated Composites Incorporated with Different Fiber Types: A ReviewAbstract Over the past decade, developing geopolymer mixes to replace ordinary Portland Cement (OPC) composites has yielded positive results, leading to extensive research. The incorporation of fibers in geopolymers, besides impacting the mechanical properties, has also significantly impacted dur [...] 1208 12203 |
Spark Plasma Sintering of Cu-Ti-Ni Ternary Alloy: Microstructural, Thermal and Electrical Propertiesby
Amos O. Oyatogun
,
Emmanuel Ajenifuja
,
Abimbola P. Popoola
,
Olawale Popoola
,
Fatai O. Aramide
and
Grace M. Oyatogun
Abstract High strength and good conductivity are both critical parameters for copper-based alloys for electrical and other technological applications. This study is aimed to produce copper alloys and metal matrix composites (MMCs) with enhanced physical properties. Cu-Ti-Ni ternary alloys and MMCs samples we [...] 1046 6091 |
Review on Some Important Research Progresses in Biodegradable Plastics/Polymersby
Zhong Hu
and
Ruanbao Zhou
Abstract Biodegradable plastics/polymers may serve as a promising solution to the global problem of plastic waste accumulation in oceans and soil and may significantly reduce carbon emissions from the manufacturing process, since the materials used to make biodegradable polymers are carbon-based and emitted [...] 2085 26531 |
Development of the Stochastic Interpretation of Quantum Mechanics by E. Nelson. Derivation of the Schrödinger-Euler-Poisson EquationsAbstract The article aims to develop the stochastic interpretation of quantum mechanics by E. Nelson based on balancing the intra-systemic contradiction (i.e., antisymmetry) between “order” and “chaos”. For the set task, it is proposed to combine two mutually opposite system-forming principles: “ [...] 861 13313 |
The Effect of Rake Angle and Cutting Edge Radius on the Orthogonal Cutting Process of Ti6Al4V AlloyAbstract This paper investigates the effect of rake angle, α, cutting edge radius, r, and feed rate, f, on the cutting force and cutting zone temperature during orthogonal dry cutting of Ti6Al4V. A numerical model representative of the 2D orthogonal cutting process is developed using ABAQUS/Expli [...] 1378 7863 |
Spin Entanglement – A Unifying Principle for Superconductors and Molecular Bondingby
Paul O'Hara
Abstract The spin-statistics theorem is generalized to include quantum entanglement. Specifically, within the context of spin entanglement, we prove that isotropically spin-correlated (ISC) states must occur in pairs. This pairing process can be composed of parallel or anti-parallel states. Consequently, the [...] 922 7102 |
Enhancing Thermal, Viscoelastic, and Mechanical Properties of Silicone Rubber Matrix through Reinforcements for Use as a Medical ImplantAbstract The use of silicone rubber as an implant is limited due to its weak properties. In this study, the impact of various reinforcements, such as TiO2 or SiO2 nanoparticles, carbon, or polypropylene fiber micro reinforcements, on the mechanical, thermal, and [...] 1915 13341 |
Whisker Bond: From Findings to Concept in Refractoriesby
Zongqi Guo
and
Wenxu Wei
Abstract Ceramic bonds are conventionally formed during the burning of refractory bricks and by using pre-fabricated blocks or monolithic lining, which is characterized as the coalescence of the particles by liquid sintering. However, the whisker bond was discove [...] 1150 5809 |
Review on the Development of Titanium Diboride CeramicsAbstract Titanium diboride (TiB2) materials have garnered significant attention due to their remarkable comprehensive properties. They offer potential applications in high-temperature structural materials, cutting tools, armor, electrodes for metal smelting, and wear-resistant parts. H [...] 3522 22173 |
A Review on Silk Fibers and Their Medical ApplicationsAbstract This mini-compilation study included the chemical structure, mechanical, thermal, and dimensional properties of silk fiber, its production process, pre-treatment, and biomedical applications from various experimental studies, which are compiled and summarized. The silk fiber should have a degumming [...] 2891 15146 |
Capillary Suction Properties of Mortar Made with Recycled Plastic Aggregates Elaborated from Waste Electrical and Electronic EquipmentAbstract It is possible to revalue the plastic fraction from WEEE using it as a recycled aggregate (RA) in cement mortars. However, this feasibility depends on elaborating a granular material via a core-shell strategy to stabilize the potential contaminants. The core is a plastic particle, and the shell is a [...] 888 5031 |
Self-Healing Concrete Techniques and Technologies and Applicationsby
John Hanna
Abstract The main weakest point of concrete is its exposure to cracks, and concrete structure repair is expensive, especially for infrastructure maintenance, which is difficult to access. The ability of self-healing concrete (SHC) to successfully heal fractures without the assistance of humans has received m [...] 6079 68668 |
Do Magnetic Monopoles Exist?Abstract In this paper, we continue our previous work by discussing the consequences of curvature in spacetime caused by the presence of mass and the implications of this. We address the question raised by Dirac regarding the impact of a magnetic monopole on the quantum world. We discuss quantiza [...] 1338 11069 |
Elementary Collective Effects in Systems Containing Small Fermion-NumbersAbstract Collective effects are a typical nuclear feature that refers to the behavior of a group of N fermions (protons and neutrons) within the atomic nucleus. Our interest lies in light nuclei only. Thus, we consider here, using the Lipkin model, a small-N fermion system at low-temperature T and discover - [...] 1212 5353 |
Modified Organized Systems by Incorporation of Carbon Allotropes and Derivatives for Electron Shuttle, ET, FRET, MEF, and Quantum Biology CouplingAbstract This communication was brief to show how high conjugated carbon-based structures and carbon allotropes could participate as electron shuttles, semiconductors, quantum emitters, and Optoelectronic processors within confined nanostructured organized systems. In particular, it was focused on nanoassemb [...] 1045 6419 |
An Overview of Treatments for Ultraviolet Quenching Substances (UVQS) and Per- and Polyfluoroalkyl Substances (PFAS) Removal from Landfill LeachateAbstract Organics found in landfill leachate (humic acids, fulvic acids, and hydrophilic fraction) have a solid ability to absorb ultraviolet (UV) radiation, which negatively affects UV disinfection; leachate ultraviolet quenching substances (UVQS) can, therefore, have a significant [...] 1874 10354 |
Acknowledgment to Reviewers of Recent Progress in Materials in 2023Abstract The editors of Recent Progress in Materials would like to express their sincere gratitude to the following reviewers for assessing manuscripts in 2023. We greatly appreciate the contribution of expert reviewers, which is crucial to the journal's editorial process. We aim to reco [...] 828 4304 |
Quantum Semiconductors Based on Carbon Materials for Nanophotonics and Photonics Applications by Electron Shuttle and Near Field PhenomenaAbstract This review intended to resume key Research reports and publications that open many themes and topics related to Carbon-based semiconductors and Quantum emitters. The Design and synthesis of highly pure materials such as Graphene, Carbon Nanotubes, fullerenes, and other Carbon-based allotropes were [...] 1102 7954 |
Potential Applications of NanomedicineAbstract EditorialPotential Applications of NanomedicineHossein Hosseinkhani *Innovation Center for Advanced Technology, Matrix HT, Inc., New York, NY 10019, USA; E-Mail: hh@matrix- [...] 1146 5602 |
Stress Analysis and Life Prediction of a Ceramic Matrix Composite Vane Using a Micromechanics-Based Approachby
Unni Santhosh
and
Jalees Ahmad
Abstract The results of stress analysis of a ceramic matrix composite (CMC) vane using a physics-based model developed for two-dimensional woven CMCs are presented. The model considers the inherent defects and micromechanical damage in woven CMCs along with time-dependent deformation [...] 1592 10281 |
Versatile Surface Chemistry of Carbon-Based Nanoplatforms by Covalent Bonding, Non-Covalent Linking, Crosslinking, and Self-AssemblingAbstract This mini-review discussed the best-known chemical and synthetic methodologies used in the last years to modify carbon allotropes, with an interest in nanotechnology. In this perspective, chemistry with optoelectronics applications and recent trends within bio-applications focusing mainl [...] 1259 8308 |
Mesoscale Modeling of Extrusion and Solidification During Material Extrusion Additive ManufacturingAbstract In this work, we apply a multiphysics approach to fused deposition modeling to simulate extrusion and solidification. Restricting the work to a single line scan, we focus on the application of polylactic acid. In addition to heat, momentum and mass transfer, the solid/liquid/vapor interf [...] 1529 7960 |
Pyrethrin Type Compounds from the Municipal Solid Waste Ghazipur Landfill Inert Soil as Brain and Cancer 5-HT Receptor Binding AgentsAbstract The Inert soil obtained from the Ghazipur Municipal Solid Waste landfill located in East Delhi, India has been used as the starting material for the work described in this paper. This mountain-like monster is often in the news for its bad smell, pollution of the groundwater in the area from its leac [...] 1255 7659 |
Review on Material Performance of Carbon Nanotube-Modified Polymeric Nanocompositesby
Zhong Hu
and
Haiping Hong
Abstract The chemically functionalized carbon nanotubes (f-CNTs) and hydrogen bonding modified polymer composites (CPCs) exhibit unique chemical, mechanical, electrical, and thermal properties and are emerging as promising materials to achieve extraordinarily high electrical and thermal conductivity, lightwe [...] 2378 16668 |
Insights Focused on Hybrid Graphene Modifications within the Nanoscale for Opto-Electronics PerspectivesAbstract This brief letter presents this Special Issue nominated as “Hybrid Graphene-based Materials: Synthesis, Characterization, Properties, and Applications”. This intends to show and discuss the main properties of Graphene and its derivatives; and how it could be synthesized, modified and tuned for Optic [...] 1197 7336 |
Behavior of RC Buildings under Blast Loading: Case StudyAbstract In recent years, regional wars and terror activities have caused blast-loading effects on reinforced concrete buildings, resulting in catastrophic human and material damage. When a building is exposed to a blast load, a very high air pressure affects the building within a very short duration. To dec [...] 1415 11059 |
Detection of Anomalies in Additively Manufactured Metal Parts Using CNN and LSTM NetworksAbstract The process of metal additive manufacturing (AM) involves creating strong, complex components by using fine metal powders. Extensive use of AM methods is expected in near future for the production of small and medium-sized batches of end-use products and tools. The ability to detect loads and defect [...] 1415 10373 |
Development of Environmentally Ecofriendly Composites Based on Polypropylene/Bahia Beige Waste: Effect of Reinforcement Content on Physical, Mechanical, Chemical, and Microstructural Propertiesby
Rayara Silva dos Santos
,
Pedro Henrique Poubel Mendonça da Silveira
,
Beatriz Cruz Bastos
,
Marceli do Nascimento da Conceição
,
Roberto Carlos da Conceição Ribeiro
and
Daniele Cruz Bastos
Abstract This article presents the development and characterization of environmentally friendly composites comprising polypropylene (PP) reinforced with Bahia Beige (BB) marble waste. The composites were prepared using different PP/BB weight ratios and analyzed for their chemical, physical, mecha [...] 1232 8402 |
Spontaneous Magnetization in the Finite-Size Two-Leg Ising Ladder in the External Magnetic FieldAbstract This paper considers a finite-sized two-leg ladder of spin-1/2 particles with local inter-chain Ising interaction. We include the effects of an external magnetic field by incorporating a Zeeman-type coupling between the magnetic field and the spins localized on the lattice sites. To analyze the syst [...] 1978 9083 |
Micromechanics-Based Modeling of SiC/SiC Ceramic Matrix Composites and StructuresAbstract The behavior and response of ceramic matrix composites (CMCs), in particular silicon carbide fiber reinforced silicon carbide matrix (SiC/SiC), is affected by many factors such as variation of fiber volume fraction, residual stresses resulting from processing of the composites at high te [...] 1790 12292 |
Efficacy of Zinc Pyrithione as A Novel Anti-Bacterial Coating AgentAbstract Zinc pyrithione (ZPT) is used to prevent microbial degradation and deterioration of manufacturing starting materials such as plastics, polymers, and latexes. The main objective of this study was to evaluate the anti-bacterial properties of ZPT. Currently, there is insufficient data on the effect of [...] 1898 13746 |
Nanomaterials with Plant or Animal Origin for Greener Biodelivery and Biosensor Applications: A ReviewAbstract Nanomaterials are now used in almost every field of science; as conductors and electrodes in electronics, as nanodelivery systems in health screenings and drug delivery, as nanofibrils in filtering and textile industry, as nanoparticles in biosensor fabrication for toxin and pathogen detection, and [...] 1457 7790 |
Towards Femtoscan-Assisted Analysis of Liquid Crystal Self-Organization on Different Polymer and Glass Surfaces for Lab-on-a-Chip and Lab-on-a-Dish Applications, Including Optofluidic and Flexoelectric Onesby
Eugene Adamovich
,
Eugenia Buryanskaya
,
Anthon Elfimov
,
Irina Maklakova
,
Oleg Gradov
,
Margaret Gradova
and
Theodor Orehov
Abstract In this paper, starting with an introductory review of the applications of liquid crystals and polymer-dispersed liquid crystal systems in (bio)sensors and microfluidics, the possibilities of visualizing self-organization products of liquid crystalline media or fie [...] 1802 8123 |
Low-Velocity Impact Resistance of Glass Laminate Aluminium Reinforced Epoxy (GLARE) CompositeAbstract This study intends to determine the behavior of glass laminate aluminum-reinforced epoxy (GLARE) and glass fiber-reinforced polymer (GFRP) composites under a low-velocity impact test. Experimental tests and numerical simulations are considered for this investigation. All samples are made by the hand [...] 1514 11572 |
3D Printing of MXenes-Based Electrodes for Energy Storage ApplicationsAbstract Energy storage devices (ESD) including batteries, and supercapacitors are becoming progressively imperative in the transition to a renewable energy future, as they enable the integration of intermittent renewable sources into the grid and provide backup power during outages. There are already review [...] 2478 14735 |
Experimental and Analytical Studies of an Ultra-high Performance Concrete Beam Using Carbon Fiber Reinforced Polymer BarsAbstract Infrastructure degradation attributable to concrete deterioration and corrosion of reinforcing steel has been a long-standing challenge to the owners and engineers. This problem becomes more evident when concrete structures are subject to aggressively corrosive environments. The use of advanced mate [...] 1237 9049 |
Correction: Non Solved Contemporary Scientific Problems of Non-Conventional Bio-Surfaces Lubrication. Recent Progress in Materials 2023; 5(1): 013Abstract CorrectionCorrection: Non Solved Contemporary Scientific Problems of Non-Conventional Bio-Surfaces Lubrication. Recent Progress in Materials 2023; 5(1): 013Krzysztof Wierzcholski *, Jacek GospodarczykWS [...] 882 5242 |
Physiological Response of a Natural Central Incisor Tooth to Various Loading Conditions: A 3D Finite Element Studyby
Dipti Nikam
and
Abbas S. Milani
Abstract This study evaluates the influence of different loading angles and the area of loading on the ensuing stress distribution and the physical response of a natural central incisor tooth, using a 3D finite element analysis. The CAD model of the incisor tooth assembly (including enamel, denti [...] 843 7576 |
Evaluating the Performance of Hollow Core Slabs (HCS)-Concrete and Simplifying Their ImplementationAbstract The largest proportion of the material used in multistory buildings, and thus its carbon impact, is attributed to their slabs being the main contributor of weight. Because of their high strength and concrete self-weight reduction, composite beams with hollow-core slabs were created for t [...] 2912 16282 |
Effect of Heat Treatment on Sliding Wear Resistance of Hybrid Aluminum Matrix CompositeAbstract Composite materials with aluminum as matrix material have a wider amplitude of large-scale applications in engineering. Some salient features of aluminum matrix composites are, low density, low thermal coefficient of performance and low weight and high strength. Among the various series of aluminum [...] 1194 8065 |
7Li Diffusion in Thin Disks of Single-Crystal Garnet LLZO-Ta Studied by PFG-NMR SpectroscopyAbstract Pulsed field-gradient (PFG) NMR spectroscopy was applied to thin disk samples (0.5, 1 and 2 mm thick, 4 mm diameter) of LLZO-Ta (Li6La3Zr1.5Ta0.5O12) single crystal. We have measured th [...] 3094 13149 |
Non Solved Contemporary Scientific Problems of Non-Conventional Bio-Surfaces LubricationAbstract This paper presents new non solved, scientific research directions and their applications in contemporary non-conventional lubrication problems of the bio-surfaces domain. Here are described new research scientific trends and research problem solutions of hydrodynamic lubrication for living tissue, [...] 952 7217 |
Mechanics of ABS Polymer under Low & Intermediate Strain RatesAbstract Thermoplastics polymers like Acrylonitrile Butadiene Styrene (ABS) are often reinforced with nano/micro reinforcements to enhance their mechanical, thermal and electrical properties. However, the viscoelastic nature of these polymers results in their strong dependence on the applied strain rate and [...] 2641 15339 |
Retraction: Roy S. Performance of Grouted Coupler Embedded in Reinforced Concrete ABC Bridge Pier at Vehicle Impact. Recent Progress in Materials 2023; 5(1): 001Abstract RetractionRetraction: Roy S. Performance of Grouted Coupler Embedded in Reinforced Concrete ABC Bridge Pier at Vehicle Impact. Recent Progress in Materials 2023; 5(1): 001Recent Progress in Materials Edit [...] 826 4991 |
TOP