by Mikhail Kipnis  , Elvira Volnina  , Igor Belostotsky  , Roman Galkin  , Natalya Zhilyaeva  , Ivan Levin  , Sergey Kottsov  and Alexander Ezhov

Received: 09 September 2021;  Published: 19 September 2022;  doi: 10.21926/cr.2203027

A precursor CuO/ZnO/Al2O3 catalyst for methanol synthesis has been prepared at room temperature by introducing a ternary salt solution into the excess of sodium carbonate solution following the reverse co-precipitation method. The catalyst was tested for the synthesis of methanol from synthesis gas. The composition (vol. %) has been presented: CO, 22; CO2, 5.8; N2, 5.5; H2, balance. The methanol productivity was recorded to be 2.7 kg kgcat–1 h–1 at a temperature of 260 °С, a pressure of 3 MPa, and a [...]

by Binita Boro  , Shivam Porwal  , Dinesh Kumar  , Snehangshu Mishra  , Subrata Ghosh  , Sakshi Kansal  , Amreesh Chandra  and Trilok Singh

Received: 14 August 2022;  Published: 14 October 2022;  doi: 10.21926/cr.2204033

Solar cells based on organic-inorganic lead halide perovskites are popular in the photovoltaic community due to their high efficiency, low cost, and solution processability. Understanding the fundamentals of metal halide perovskite and its interfaces is extremely important for achieving high-quality materials and developing efficient devices using these materials with the necessary properties. Various methodologies have been used to evaluate the excellent optoelectronic properties, efficiency, and stability of PSCs [...]

by Galina Huseynova  , Gulbeniz Muxtarova  , Nushaba Aliyeva  , Gular Gasimova  and Sanubar Rashidova

Received: 05 May 2022;  Published: 05 July 2022;  doi: 10.21926/cr.2203019

This article provides an overview of zeolite-containing catalysts used in the alkylation of benzene and toluene with olefins, isobutane with butenes and butane-butene fractions, gasoline and oil fractions with olefins, propane-propylene, and butane-butylene fractions of catalytic cracking. Zeolites have various types of structures, including BEA, MFI, MWW, FAU, etc., which differ in pore size and the number and location of the channels. High-silica zeolites have a large pore volume, high acidity, good hydrothermal [...]

by Jyoti Bhattacharjee  and Subhasis Roy

Received: 17 February 2024;  Published: 09 August 2024;  doi: 10.21926/cr.2403011

The evolution of nanomaterials has been critical in modifying materials at the nanoscale for specialized uses. Carbon nanotubes were initially viewed as promising for electronics, but their inability to discriminate between semiconducting and metallic phases led to the creation of quasi-two-dimensional (Q-2D) materials. Molybdenum nanoparticles are utilized as alloy additions in corrosive and high-vacuum environments. Their characteristics differ significantly from those of their bulk counterparts. This review anal [...]

by Fabiano A.N. Fernandes

Received: 23 August 2022;  Published: 17 October 2022;  doi: 10.21926/cr.2204034

Biodiesel is derived from renewable vegetable or animal sources and is either used as a standalone fuel or blended with oil-based diesel. The kinetic mechanism of the esterification of oleic acid was investigated in a conventional batch reactor and a batch reactor coupled to a water adsorption system. The esterification was performed with oleic acid and methanol at different temperatures (70 to 110 °C) and alcohol-to-oleic acid molar ratios (3:1 to 9:1), using sulfuric acid as a catalyst. A kinetic model was constr [...]

by Shiping Wang  , Georg Bendt  and Stephan Schulz

Received: 24 May 2021;  Published: 16 July 2021;  doi: 10.21926/cr.2103001

One-pot synthesis of mesoporous hybrid material consisting of Mn-Co/CoO nanoparticles encapsulated in an N-doped graphene shell decorated with Mo2C nanoparticles (Mo2C-NC@Mn-Co/CoO) was reported. The Mn and Mo components synergistically refined the graphitized carbons due to the interactions with N and C atoms while promoting the stability of the Co/CoO nanoparticles. These components exhibited a beneficial effect on the dispersion of the active metal/metal oxide nanoparticles and the formation of a mesoporous stru [...]

by Kuldeep Saini  , Vinay Mohan Pathak  , Arpit Tyagi  and Rani Gupta

Received: 11 June 2022;  Published: 22 September 2022;  doi: 10.21926/cr.2203029

Cyclodextrin glycosyltransferase (CGTase) is a multifunctional enzyme that hydrolyzes the α-glycosidic bond between two sugar molecules and synthesizes cyclodextrins (CDs) and other transglycosylation products. It is a ubiquitously present extracellular enzyme that offers the CGTase-producing organism the sole right onto starch substrates over other microbes. The present review provides a brief account of diversity among CGTase-producing microbes, CGTase production in different heterologous hosts (wherein ext [...]

by Myllena R. Rodrigues dos Santos  , Daniela B. Battaglia Hirata  and Joelise A.F. de Alencar Figueira Angelotti

Received: 16 February 2022;  Published: 07 May 2022;  doi: 10.21926/cr.2202013

Enzymes are extensively used in biotechnological processes in several areas of industry. They are sustainable and safe, and their specificity is another characteristic that improves the performance in the process. Among enzymes, lipase is relevant due to the ability to play different roles in the industry and the possibility of collecting them from microbial sources that are found in industrial residues. This can reduce the costs of enzyme production. In relation to that, lipase immobilization is an interesting pro [...]

by Xiu-Zhi Wei  , Jianguo Liu  and Longlong Ma

Received: 28 December 2021;  Published: 21 February 2022;  doi: 10.21926/cr.2201004

In recent years, research on converting biomass platform compounds into high-value chemicals and pharmaceutical intermediates has garnered huge interest. Nitrile and amide groups are key structures in natural products and biologically active molecules. The direct conversion of biomass platform compounds into nitriles and amides will undoubtedly be an important guide for biomass utilization. In this paper, a facile and efficient triphosgene-assisted one-pot conversion for aldehydes and ketones into nitrile and amide [...]

by Ludmila Velichkina  , Yakov Barbashin  and Alexander Vosmerikov

Received: 10 October 2021;  Published: 01 December 2021;  doi: 10.21926/cr.2104004

The objective of this research was to analyze the effect of different concentrations of nitric and hydrochloric acids on the structural, acidic, and catalytic properties of a post-synthetic treated ZSM-5 type zeolite at various temperatures. The properties of zeolite catalysts were determined using different methods, such as the Brunauer-Emmett-Teller (BET) method for specific surface area, temperature-programmed desorption (TPD) of ammonia method for acidic properties, and a flow-through unit with fixed bed cataly [...]

by Anne Galarneau  , Lucie Desmurs  , Cyril Vaulot  , Habiba Nouali  , Benedicte Lebeau  , T. Jean Daou  , Vasile Hulea  , Claudia Cammarano  , Isabelle Batonneau-Gener  and Alexander Sachse

Received: 26 January 2022;  Published: 14 April 2022;  doi: 10.21926/cr.2202009

It is important to elucidate the role of the surface areas and pore volumes of hierarchical zeolites to understand their behavior as catalysts. Micro-and mesopore surface areas and volumes of the hierarchical MFI (Mobil Five zeolites) were assessed following several methods: (i) N2 adsorption at 77 K using classical and corrected t-plot analyses methods, (ii) pre-adsorption of n-nonane was followed by the study of the N2 adsorption at 77 K, and (iii) non-local-density functional theory (NLDFT) analysis using either [...]

by Heloísa Maria de Oliveira  , Francisco Alex de Sousa Silva  , Tellys Lins Almeida Barbosa  and Meiry Gláucia Freire Rodrigues

Received: 06 December 2022;  Published: 13 March 2023;  doi: 10.21926/cr.2301012

In an attempt to synthesize nanomaterial concerning chemistry, the sustainable synthesis of Zeolitic Imidazolate Framework-8 (ZIF-8) nanoparticles by a low-cost approach through the recycling of waste mother liquors was explored and then indicated the potential to remove chlorhexidine (CHLX) from an aqueous solution. ZIF-8 was produced under solvothermal reaction at 25°C and characterized by Fourier Transform Infrared Spectroscopy, X-ray diffraction, adsorption/desorption of N2, dynamic light scattering and con [...]

by Preetam Datta  and Subhasis Roy

Received: 15 April 2023;  Published: 05 July 2023;  doi: 10.21926/cr.2303020

With increasing population levels and rapidly growing industries worldwide, the purification of water contaminated with different impurities is one of the biggest challenges we face in recent times. Photocatalysis holds great potential as an efficient mineralization process to remove the foreign matter present in wastewater. Rapid advancement in innovative materials development has made photocatalysis the frontrunner among different water treatment methods. Our main priority lies in different strategic approaches t [...]

by Amit Ahlawat  , Tarun Kumar Dhiman  , Pratima R. Solanki  and Pawan S. Rana

Received: 24 July 2022;  Published: 03 November 2022;  doi: 10.21926/cr.2204039

Organic compounds are one of the most severe pollutants occurring in the environment. Hence, it is important to remove these compounds from the environment through remediation processes such as photocatalysis. The present study investigated the photocatalytic degradation of p-nitrophenol (NP) and phenol red (PR) using a cerium oxide-titanium oxide nanocomposite (CeO2-TiO2nc) under UV light. CeO2-TiO2nc was synthesized using the co-precipitation method. An X-ray diffraction (XRD) analysis confirmed the phase purity [...]

by Piyush Shrivastava  , Jharna Gupta  , Rushil Bhatt  and Aditi S. Vetal

Received: 18 September 2024;  Published: 08 January 2025;  doi: 10.21926/cr.2501002

This study aimed to synthesize nickel oxide (NiO) and cobalt oxide (Co3O4) based catalysts for synthesizing biodiesel from Citrullus colocynthis oil. Cobalt-nickel mixed oxide catalysts made by co-precipitation technique with different Cobalt to Nickel ratios and named Co:Ni (50:50), Co:Ni (67:33), and Co:Ni (33:67). The Characterization of these synthesized catalysts was performed by XRD and SEM analysis. The transesterification process checked the catalytic activity of these catalysts, and it was found that Co:Ni [...]

by Manal Al-Eid  , Lianhui Ding  , Donya Sewdan  , Emad N. AL-Shafei  , Rasha Al-Ghamdi  , Abdulaziz Alqarawi  and Essa Al naimi

Received: 13 August 2022;  Published: 17 October 2022;  doi: 10.21926/cr.2204035

Parent ZSM-5 and Ga-modified ZSM-5 catalysts with different Si/Al ratios and particle sizes were prepared. The physicochemical properties of the prepared catalysts were investigated by performing X-ray powder diffraction analysis, BET surface area analysis, and NH3-TPD analysis. The performance of the aromatization reaction of the prepared catalysts was evaluated with 1-hexane as a model compound. The zeolite catalysts with a low SiO2/Al2O3 ratio possessed better activity than those with a high SiO2/Al2O3 ratio. Ga [...]

by Gabriel Santos Viana  , Jorge Álef Estevam Lau Bomfim  , Gabriel Pereira da Silva  , José Faustino Souza de Carvalho Filho  , Miriam Sanae Tokumoto  , Fernando Cesário Rangel  and Rosenira Serpa da Cruz

Received: 30 June 2022;  Published: 13 September 2022;  doi: 10.21926/cr.2203026

Technological development made in the field of biomass application allows synthesizing several high-value products, such as furfuraldehyde. Furfural, produced through sequential hydrolysis and dehydration reactions from biomass, is considered a platform molecule and a precursor of several other chemicals and biofuels that are generated following reactions such as hydrogenation, hydrodeoxygenation, and decarboxylation. This review aims to reveal the environmental-friendly mechanisms followed for producing furfural d [...]

by Anilkumar Mettu  , Ninad Loke  , Vilas Patil  , Rahul Panday  and Sreenivasarao Gajula

Received: 10 January 2022;  Published: 19 July 2022;  doi: 10.21926/cr.2203021

In this study, we present selective hydrocracking of poly (di and tri) aromatic compounds to monoaromatics, such as benzene, toluene, and xylenes (BTX), over a mixture of Pt/Al2O3 and Y zeolites. The polyaromatic compounds feed is a combined simulated model feed, which is similar to light cycle oil (LCO) in composition. The feed is processed in a fixed bed reactor over a catalyst mixture: in the first step, selective hydrogenation of di and tri-aromatic compounds occurs in the presence of Pt/Al2O3 catalyst, followe [...]

by Carsten Unglaub  , Johannes Thiessen  and Andreas Jess

Received: 27 September 2022;  Published: 03 January 2023;  doi: 10.21926/cr.2301001

Fischer-Tropsch reactors operated in a steady state suffer from a low pore effectiveness factor and a high methane selectivity caused by internal mass transfer limitations due to the accumulation of long-chain hydrocarbons inside the catalyst pores. Therefore, an alternating process switching between Fischer-Tropsch synthesis (FTS) and drainage of the pores by hydrogenolysis is proposed. The periodical cracking of the accumulated waxes within the (partially) filled pores, realized by a switch from syngas (H2, CO) t [...]

by Abanti Nag

Received: 27 July 2023;  Published: 11 October 2023;  doi: 10.21926/cr.2304024

In the era of renewable and sustainable energy, perovskite materials remain pioneers as energy harvesting materials, be it thermoelectric waste heat harvesting or photovoltaic solar cell application. Oxide perovskite material is an emerging thermoelectric material in solving energy shortage issues through waste heat recovery. The chemical and structural stabilities, oxidation resistance, and cost-effective and straightforward manufacturing process are a few advantages of the oxide-based thermoelectric materials. Th [...]

by Antusia dos Santos Barbosa  and Meiry Gláucia Freire Rodrigues

Received: 24 October 2023;  Published: 28 January 2024;  doi: 10.21926/cr.2401002

The research describes a sustainable approach for the synthesis of zeolite NaA using kaolin as an alternative source of silica. The main objective of this research was to prepare NaA zeolite using metakaolin derived from kaolin from the state of Rio Grande do Norte, Brazil, as an alternative source of silica, reducing the production cost and evaluating its thermal stability. In addition, a study of the thermal stability of the zeolite and cost estimates for zeolite production were carried out. Traditional methods o [...]

by Stamatia Spyrou  , Alexandra V. Chatzikonstantinou  , Archontoula Giannakopoulou  , Renia Fotiadou  , Silvia Priska  , Yannis V. Simos  , Aliki Tsakni  , Dimitrios Peschos  , Dimitra Houhoula  , Epaminondas Voutsas  and Haralambos Stamatis

Received: 01 December 2022;  Published: 19 January 2023;  doi: 10.21926/cr.2301004

Biomass derived from green marine macroalgae Ulva sp. is considered a rich source of bioactive compounds. In the present study, we demonstrate the increased bioactivity of a phenolic-rich extract derived from green marine macroalgae Ulva intestinalis after its treatment with fungal laccases from Trametes versicolor and Agaricus bisporus. The phenolic composition of the extract, before and after its enzymatic treatment, was determined through several analytical methods. Furthermore, the antioxidant, enzyme-inhibitor [...]

by Minato Nakamura  and Yoshinori Murakami

Received: 17 August 2021;  Published: 13 September 2021;  doi: 10.21926/cr.2103002

The photocatalytic reaction involved in TiO2 photocatalysis was investigated using a microreactor coated with TiO2 film on the glass plate attached on one side of the microreactor. It was confirmed that the effect of H2O2 on the photocatalytic degradation efficiency of azo dyes (acid orange 7, acid red 151, and acid yellow 23) was dependent on the polymorphs (anatase and rutile) of TiO2 coated on the glass plate of the UV-irradiated microreactor. Scavengers of holes (KI) and electrons (p-benzoquinone) were added to [...]

by Mateus Carvalho  , Ana Paula Oliveira  , Francieli Mayer  , Cesário Virgens  and Maria do Carmo Rangel

Received: 31 August 2022;  Published: 02 November 2022;  doi: 10.21926/cr.2204038

Catalytic pyrolysis is an attractive alternative for converting biomass into energy and chemicals to replace fossil sources. This has encouraged the search for efficient catalysts that can directly remove oxygenated products during pyrolysis, since they are the main problem in the processing and use of the products obtained. The catalytic and non-catalytic pyrolysis of medium density fiber (MDF) over beta zeolite-supported nickel (3 and 5%) was performed using the biomass/catalyst of 1.0/0.2 ratio. The thermokineti [...]

by Rama Jaiswal  , Melad Shaikh  and Kalluri V. S. Ranganath

Received: 01 June 2023;  Published: 21 November 2023;  doi: 10.21926/cr.2304028

A surface modification approach has prepared a nanostructured organic framework connecting two metal oxide NPs. The surface modifier attached two metal oxide NPs via molecular interaction to generate modular structures of fiber, rod, or sponge materials. Thus, obtained hybrid systems have been confirmed through FT-IR, TGA, PXRD, and SEM. Metal oxides such as Fe3O4 and MgO generated mixed materials via the surface modification approach. Thus, obtained materials have been successfully used to dehydrate biomass-derive [...]

by Edmundo S. Valerio Neto  , Caio V.S. Almeida  , Giancarlo R. Salazar-Banda  and Katlin I.B. Eguiluz

Received: 24 November 2023;  Published: 11 March 2024;  doi: 10.21926/cr.2401003

In this study, we synthesized Pt-Rh nanowires (NWs) through chemical reduction of metallic precursors using formic acid at room temperature, excluding the use of surfactants, templates, or stabilizing agents. These NWs were supported on two substrates: carbon (Vulcan XC-72R) and carbon modified with tin oxide (SnO2) via the sol-gel method (10 wt.% SnO2). We explored the electroactivity of Pt/SnO2/C, Pt-Rh/C, Pt-Rh/SnO2(commercial)/C (commercial SnO2), and Pt-Rh/SnO2/C NWs toward electrochemical oxidation of ethanol [...]

by Louguangshu Huang  , Hui Liu  , Xiaoxia Xue  , Wuduo Zhao  and Tiesheng Li

Received: 13 December 2021;  Published: 03 February 2022;  doi: 10.21926/cr.2201003

In this article, an approach to generate self-assembly cyclopalladated polythiophene imine monolayers (denoted as ITO@Pd-CPTIMs) is described. The monolayers were fabricated by combining self-assembly (SA), hybrid doping (HD), and electrochemical polymerization (ECP) called SA-HD-ECP. The catalytic activity and stability of the polymerized monolayers in the Suzuki coupling reaction were improved by modulating the structure and morphology in hybrid doping using different thiophene derivatives, concentrations, and sc [...]

by Oswaldo Núñez  , Mohammad Fereidooni  , Victor Márquez  , Duangthip Sattayamuk  , Piyasan Praserthdam  and Supareak Praserthdam

Received: 25 August 2023;  Published: 05 December 2023;  doi: 10.21926/cr.2304029

To improve CH4 and H2 formation from CO2 photoreduction using non-organic, non-laborious, and inexpensive photocatalysts, we have prepared two surface-silicate-modified TiO2 catalysts: P25-SiO2 and AmTiO2-SiO2 (amorphous TiO2) to be tested in water and using UV light. The last catalyst produces more CH4 and H2 in water than P25 (3:1 TiO2 anatase: rutile) under UV light irradiation of HCO3- and CO2; am-TiO2-SiO2 at pH = 7, produces 8 times more CH4 and H2 than P25 with selectivity at the reactor headspace of 30% and [...]

by Nilam C. Dige  , Chandrama S. Randive  , Omkar S. Tamhane  , Rushikesh S. Ghorpade  , Sanjay R. Kale  and Prasad G. Mahajan

Received: 03 December 2022;  Published: 12 March 2023;  doi: 10.21926/cr.2301011

Keeping the green chemistry approach in mind we have synthesized a novel morpholine-based ionic liquid [NBMMorph]+Br-. The structure of Ionic liquid was confirmed by spectral techniques viz. IR, 1H NMR, and 13C NMR, analysis. The synthesized novel IL [NBMMorph]+Br- was utilized to prepare 1,2,4-triazolidine-3-thiones of biological significance. The [NBMMorph]+Br- IL shows excellent catalytic activity, and a simple filtration technique can separate the thiazolidinedione products. The structure of the synthesized com [...]

by Thiago Rodrigo Barbosa Barros  , Thianne Silva Batista Barbosa  and Meiry Gláucia Freire Rodrigues

Received: 24 October 2023;  Published: 26 December 2023;  doi: 10.21926/cr.2304031

This work focuses on preparing NaY zeolite using alternative sources of silica and modifying the zeolite with the surfactant cetyltrimethylammonium bromide. Two different hydrothermal synthesis routes were employed: the conventional method using sodium silicate as the silica source, and the other is a sustainable approach using vermiculite clay as the silica source. In traditional zeolite synthesis, sodium silicate is often used as the source of silica. However, . The vermiculite was subjected to an acid treatment, [...]

by Carsten Unglaub  and Andreas Jess

Received: 27 June 2023;  Published: 12 September 2023;  doi: 10.21926/cr.2303022

Accumulation of wax inside the catalyst pores during transient cobalt-catalyzed Fischer-Tropsch synthesis (FTS) leads to unfavorable product distribution and low activity by imposing internal mass transfer limitations. The condensation of paraffin severely changes the apparent product stream that actually leaves the reactor before the catalyst pores are filled completely and the steady state is reached. Thus, the product distribution of the transient FTS is less complex than expected in comparison to the steady-sta [...]

by Shangkun Deng  , Yini Lei  , Yiyu Deng  , Yilan Lai  and Xingyuan Gao

Received: 29 January 2022;  Published: 26 April 2022;  doi: 10.21926/cr.2202012

The use of the dry reforming of methane (DRM) to convert the two principal greenhouse gases, methane and carbon dioxide, to syngas (a mixture of H2 and CO) has attracted increasing attention in recent years. However, the DRM reaction suffers from the twin disadvantages of carbon deposition and sintering, so a highly efficient and robust catalyst with superior anti-deactivation properties is required. One way to meet this need is to incorporate active metals into crystalline oxides, such as perovskite. In this paper [...]

by Muhammad Ismail

Received: 09 November 2022;  Published: 15 March 2023;  doi: 10.21926/cr.2301014

Silver nanoparticles have been utilized in an easy, sensitive, and effective approach through spectrophotometry and spectrofluorimetry to quantify urea in water samples. Here, 1,3-di-(1H-imidazole-1-yl) -2-propanol (DIPO) was employed to stabilize Ag NPs produced from the reduction of aqueous silver nitrate by sodium borohydride (NaBH4). Beer-Lambert's law was applied for determination using the complexation of Ag NPs with urea molecules. The results show urea can be assessed concurrently with good results and perc [...]

by Lidiane A. Morais  , Francisco L. Castro  , Glauber J.T. Fernandes  , Marcio D.S. Araujo  , Mirna F. Farias  , Ana P.M.A. Guedes  , Valter J. Fernandes Jr  and Antonio S. Araujo

Received: 17 August 2022;  Published: 30 May 2023;  doi: 10.21926/cr.2302017

The TiO2/MCM-41 nanomaterials were synthesized by impregnation with an excess solvent with different percentages of titanium dioxide. They were used for catalytic degradation of Benzene Toluene Ethylbenzene and Xylenes (BTEX) in the presence of hydrogen peroxide in aqueous media. The obtained materials were characterized by X-ray Diffraction, nitrogen adsorption-desorption using the BET method and Fourier Transform Infrared Spectroscopy. The nanostructured phase of the hexagonal ordered materials was obtained even [...]

by Otto V.M. Bueno  , Miguel A. San-Miguel  and Edison Z. da Silva

Received: 10 October 2022;  Published: 14 December 2022;  doi: 10.21926/cr.2204043

Linear atomic chain (LAC) gold nanowires (Au-NWs) containing oxygen impurities are materials that could be used as supports to stimulate chemical reactions. Its peculiar structural characteristics, such as abnormal Au-Au bonds, make it interesting to explore the chemical reactions of this material at a theoretical level. This work investigated the chemical reaction of ethanol supported on Au-NW containing two oxygen impurities. Using ab initio molecular dynamics simulations, it was shown that the presence of oxygen [...]

by Jia Yu  , Haiyan Jing  , Zongdeng Wu  , Boyuan Liu  , Wu Lei  and Qingli Hao

Received: 29 April 2022;  Published: 21 June 2022;  doi: 10.21926/cr.2202016

The rational design of efficient electrocatalysts for oxygen reduction reaction (ORR) is the key to developing fuel cells and metal-air batteries. Carbon-supported iron-based materials, as the most promising electrocatalysts for ORR, have drawn much attention as they are cost-effective and exhibit high activity. In this work, a three-dimensional (3D) Fe3O4-decorated N-doped graphene aerogel (Fe3O4/NGA) catalyst was synthesized following a simple hydrothermal method which was followed by an annealing process. The co [...]

by Virginia M.R. Menezes  , Gustavo M. Paula  , Liliane A. Lima  , Meiry G.F. Rodrigues  and Fabiano A.N. Fernandes

Received: 05 May 2022;  Published: 16 August 2022;  doi: 10.21926/cr.2203023

In this study, we investigated the oligomerization mechanism of the Fischer-Tropsch synthesis catalyzed by a cobalt-based catalyst supported by SBA-15. The Co/SBA-15 catalyst contained 20% w/w of cobalt. It was prepared by the wet impregnation method and characterized by X-ray diffraction (XRD), N2 adsorption-desorption, temperature-programmed reduction (TPR), and scanning electron microscopy coupled to X-ray energy dispersion spectroscopy (SEM-EDS). The FT synthesis was conducted in a slurry bed reactor operating [...]

by Kate M. Waldie  and Sriram Katipamula

Received: 31 December 2021;  Published: 22 February 2022;  doi: 10.21926/cr.2201006

Fuel cells based on renewable synthetic fuels are promising alternatives to fossil fuel combustion for efficient electricity production. Much focus has been placed on hydrogen as a chemical fuel, but being a flammable gas, there are challenges with its safe handling. Formic acid is an attractive liquid fuel for use in direct formic acid or formate fuel cells, and it can in principle be produced from the thermal or electrochemical reduction of carbon dioxide. Over the past ten years, advances have been made in the d [...]

by Jamylle Yanka Cruz Ribeiro  , Ronaldo Santos da Silva  , Giancarlo Richard Salazar-Banda  and Katlin Ivon Barrios Eguiluz

Received: 06 September 2022;  Published: 19 January 2023;  doi: 10.21926/cr.2301005

This paper describes the synthesis of Pd0.70-Nix-By nanoparticles (x:y = 0.30:0, 0:0.30, 0.25:0.05, 0.20:0.10, 0.15:0.15, and 0.10:0.20) supported on carbon Vulcan XC-72 R by the chemical reduction method using ethylene glycol as a reducing agent for the study of the electrochemical oxidation of ethanol in alkaline media. Neither surfactants nor templates were used during the syntheses. The catalysts were physically characterized by transmission electron microscopy that showed the formation of nanoparticles with di [...]

by Mouhamad Rachini  , Mira Jaafar  , Fatima Al Ali  , Zahraa Slaiman  , Mohamad Kassem  , Eugene Bychkov  , T. Jean Daou  , Joumana Toufaily  and Tayssir Hamieh

Received: 29 January 2022;  Published: 21 April 2022;  doi: 10.21926/cr.2202011

The use of Pd-Cu bimetallic catalysts in the reduction of aqueous nitrate ions by hydrogen was studied. The catalysts were supported on multi-walled carbon nanotubes (MWCNTs), activated carbon (AC), and Titania, and the influence of the support on the nitrate reduction activity in water was then investigated. The catalysts were characterized before and after use by FT-IR, XRD, SEM, EDX, and Laser Granulometry. It was found that the surface characteristics of the support have an influence on the catalyst activity, w [...]

by Mingyu Wang  , Jie Liu  , Jinpeng Li  and Tiesheng Li

Received: 21 March 2022;  Published: 14 April 2022;  doi: 10.21926/cr.2202010

A new chiral cyclopalladated ferrocenyl imine catalyst (called 4a2) was designed and synthesized, and its self-assembly catalytic polymeric brush supported on silicon (denoted as Si@PB4a2) was also fabricated by surface-initiated atom transfer radical polymerization (ATRP) and characterized. The catalytic properties of monomer 4a2 in homogeneous and Si@PB4a2 in heterogeneous in Heck and Suzuki cross-coupling were investigated, respectively. They exhibited higher catalytic activity in Heck, and Suzuki coupling react [...]

by Miguel Angulo  and Mª Carmen Márquez

Received: 30 December 2022;  Published: 16 February 2023;  doi: 10.21926/cr.2301008

This work demonstrates the possibility of implementing a technology that allows profitable value to be drawn from the meat waste from retail stores. Protein hydrolysate, collagen and fatty acids were recovered from meat waste through enzymatic hydrolysis using a mixture of enzymes: a protease (Alcalase) and a lipase (Resinase). Enzymatic hydrolysis was studied by response surface methodology (RMS). Four independent variables were used to study the response variables. The analysis showed that all factors including p [...]

by Rui Wang  , Dong Lin  , Minghuan Gao  , Linna Guo  , Tiesheng Li  and Minghua Liu

Received: 29 January 2022;  Published: 07 April 2022;  doi: 10.21926/cr.2202008

A series of novel Bi2MoO6/Ag/Ag2CrO4 heterostructure photocatalysts (denoted as BA-X, X = 1, 3, 5, 10) were synthesized using a coprecipitation method. These photocatalysts were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), UV-vis spectroscopy, and X-ray photoelectron spectroscopy (XPS) and their photocatalytic properties were investigated. Compared with pure Bi2MoO6 or Ag2CrO4, BA-5 exhibited a higher photocatalytic property and broader light absorption. In addition, the surface pla [...]

by Daria Armani  and Antonella Petri

Received: 16 June 2023;  Published: 08 November 2023;  doi: 10.21926/cr.2304026

This paper will present some sectors in which enzymes can replace traditional catalysts in poly(butylene-succinate) industry, emphasizing the green chemistry aspects associated with these newer strategies.

by Azra Shafi  and Qayyum Husain

Received: 06 August 2022;  Published: 17 November 2022;  doi: 10.21926/cr.2204040

Interpreting the relationship between the activity and structure of β-galactosidase is necessary to perceive the impact of the enzyme’s conformation on its catalysis. The current study thoroughly explains the effects of additives such as ethylenediaminetetraacetic acid (EDTA), sodium dodecyl sulfate (SDS), dithiothreitol (DTT), and urea on β-galactosidase activity and structure. β-Galactosidase activity was determined at various ionic strengths and temperatures as a function of time. Structural [...]

by Tellys Lins Almeida Barbosa  and Meiry Gláucia Freire Rodrigues

Received: 03 October 2023;  Published: 11 December 2023;  doi: 10.21926/cr.2304030

The research described the production and characterization of various materials, particularly alpha-alumina ceramic supports, zeolite SAPO-34, and zeolite membranes. Ceramic supports were manufactured through dry uniaxial compaction. Sintering of the supports was carried out at 1300°C for 2 h. SAPO-34 zeolites and zeolite membranes were synthesized through a hydrothermal process involving two steps: a first step at 38°C for 24 h and a second step at 200°C for 24 h. The research aimed to determine how different sili [...]

by Mathivathani Kandiah  , Dharsha Bhaskaran  and Ominda Perera

Received: 29 April 2024;  Published: 22 July 2024;  doi: 10.21926/cr.2403010

Nanotechnology is a fast-rising market in catalytic research; however, the production of eco-friendly nanoparticles remains a significant challenge. In this study, silver nanoparticles (AgNPs) were synthesized from the agro-industrial waste of leaves of C. longa, C. aromatica, C. caesia, C. zedoaria, and C. amada at RT after 24 h, which was confirmed with UV-spectrophotometric evaluation between 320-520 nm. SEM revealed cubic and 30-50 nm AgNPs, while band-gap energy was presented as semi-conductors. Synthesized Ag [...]

by Simona Bassoli  , Anett Schallmey  , Julie Oble  , Giovanni Poli  and Alexandre Pradal

Received: 22 July 2022;  Published: 26 October 2022;  doi: 10.21926/cr.2204036

A two-step protocol for the synthesis of aryl-3-hydroxypropanones, which were regarded as lignin degradation products, was proposed herein. This protocol provided a more rapid and easier access to aryl-3-hydroxypropanones, and aryl-3-hydroxypropanones were expected to be ideal platform molecules for the synthesis of more complex value-added targets.

by Thiago Rodrigo Barbosa Barros  , Thianne Silva Batista Barbosa  , Tellys Lins Almeida Barbosa  and Meiry Gláucia Freire Rodrigues

Received: 01 November 2022;  Published: 01 March 2023;  doi: 10.21926/cr.2301010

Rhodamine (RhB) adsorption was carried out on MCM-41 and MCM-41 calcined. The effect of parameters such as pH was investigated. The reusability potential of MCM-41 was also established and the mechanism of RhB adsorption was discussed. MCM-41 was synthesized and calcined, with all samples characterized by X-Ray Diffractometry, X-ray Fluorescence by Dispersive Energy, Infrared Spectroscopy, Scanning Electron Microscopy, and Thermogravimetric analysis. The results of the characterization techniques performed confirme [...]

by Fabien Drault  , Youssef Snoussi  , Camila P. Palombo Ferraz  , Joelle Thuriot-Roukos  , Svetlana Heyte  , Ivaldo Itabaiana Junior  , Maya Marinova  , Sebastien Paul  and Robert Wojcieszak

Received: 25 October 2021;  Published: 13 January 2022;  doi: 10.21926/cr.2201001

Regardless of their size, supported gold nanoparticles are largely used for liquid-phase oxidation reactions. Small gold nanoparticles exhibit good performance during the reduction of organic compounds. The direct reduction of carboxylic acid to aldehyde is a famous and familiar reaction in the field of organic chemistry and is considered as one of the fundamental chemical transformations. Herein, we present Au/hydrotalcite, Au/MgO, and Au/Al2O3 systems as heterogeneous versatile catalysts to realize the oxidation [...]

by Jharna Gupta  and Madhu Agarwal

Received: 08 December 2022;  Published: 13 March 2023;  doi: 10.21926/cr.2301013

Waste marble powder (WMP) is Investigated for developing heterogeneous catalysts by calcination method and used in biodiesel synthesis by esterification-transesterification process from Pongamia Pinnata oil. Hammet indicators, Fourier transform infrared (FT-IR), Thermogravimetric analysis, and X-ray powder diffraction (XRD) techniques were also studied for the characterization of developed catalyst from waste marble powder (WMP). The conversion of calcium carbonate to calcium oxide in marble powder was found at 800 [...]

by Nicolas A. Ishiki  , Maria L. Della-Costa  , Beatriz Keller  , Kleper O. Rocha  , Francielle Bortoloti  and Antonio C. D. Ângelo

Received: 04 September 2023;  Published: 16 November 2023;  doi: 10.21926/cr.2304027

This paper investigates how the aggregation of bimetallic nanoparticles (NPs) influences the electronic condition of the surface adsorption site and, hence, the performance of materials during the electrooxidation of fuels in an alkaline medium. First, we synthesized Pt-Ni NPs in three configurations: ordered intermetallic, ordinary alloy, and core-shell. The NPs contained Pt and Ni close to a 1:1 Pt/Ni atomic ratio. They had similar particle sizes, which allowed us to evaluate their performance without the influen [...]

by Pari Muradova

Received: 24 June 2022;  Published: 26 September 2022;  doi: 10.21926/cr.2203030

In this study, we prepared a fine-grained, aluminum-reinforced alumina support matrix of the active mass of catalysts, which showed activity in heterogeneous catalytic reactions stimulated by electromagnetic radiation in the microwave range. The support absorbed microwave radiation of 2.45 GHz. We compared the textural characteristics of samples of Al/Al2O3 supports obtained by conventional heat treatment to those synthesized by heat treatment in a microwave field. We found several advantages of heat treating poten [...]

by Mª Carmen Márquez

Received: 27 March 2024;  Published: 18 July 2024;  doi: 10.21926/cr.2403009

Lipase-catalyzed hydrolysis of olive oil has been studied in the absence of emulsifier. A simple mathematical model to predict the hydrolysis rate is derived from a proposed kinetic mechanism of the reaction. The hydrolytic reaction obeys Michaelis-Menten kinetics with a simultaneous second-order enzyme deactivation. The model predictions closely agree with the experimental results.

by Thibaut Triquet  , Claire Tendero  , Laure Latapie  , Romain Richard  and Caroline Andriantsiferana

Received: 20 January 2022;  Published: 15 March 2022;  doi: 10.21926/cr.2201007

This work reports the performance of a sequential adsorption/photocatalysis process using activated carbon fibers with deposited TiO2 for the elimination of the antibiotic ciprofloxacin (CIP) in water. A commercial activated carbon fiber (ACF10) was selected as the support, and a TiO2 coating was synthesized using Metal Organic Chemical Vapor Deposition (MOCVD). Experiments were carried out using a photocatalytic reactor irradiated with monochromatic LEDs (365nm). Two different processes have been studied: adsorpti [...]

by José C. Conesa

Received: 29 November 2021;  Published: 21 February 2022;  doi: 10.21926/cr.2201005

It is important to understand the band offsets between semiconductors, which are crucial to determine the direction of electron transfer at the interfaces. Two methods are normally used to determine the direction from the first principles: alternating slabs put in contact (without empty spaces between them) and separate calculations for each material surface in the presence of vacuum spaces. The first method may introduce distortions due to insufficient epitaxial match, which may lead to bandgap changes, and the se [...]

by Michel Z. Fidelis  , Elaine Trojan de Paula  , Eduardo Abreu  , Maria E.K. Fuziki  , Onelia A. A. dos Santos  , Rodrigo Brackmann  and Giane G. Lenzi

Received: 18 September 2023;  Published: 22 September 2023;  doi: 10.21926/cr.2303023

Due to its similar characteristics to titanium, niobium has become an attractive alternative in photocatalytic processes. Research indicates that titania has an optimal percentage of phases resulting in a commercial catalyst, P25, that contains more than 70% anatase with a minor amount of rutile and a small amount of amorphous phase. On the other hand, for Nb2O5, percentage optimization was little explored in the literature, which consists of studying the phases obtained via heat treatment individually and in diffe [...]

by Sabira Sabir Ismayilova  and Sabir Qarsh Amirov

Received: 09 January 2022;  Published: 28 June 2022;  doi: 10.21926/cr.2202017

The kinetics of dearomatization of a kerosene fraction processed using a zeolite catalyst (0.9 HZSM-5) at different temperatures (160-200°C), the molar ratio between the aromatic hydrocarbons present in the kerosene fraction and n-decene (1:(0.5-4)), and the reaction time (1-3 h) were studied. Based on the obtained data, a kinetic model for kerosene dearomatization is proposed. It is assumed that the single-center Riedel mechanism is followed. The stage associated with the interaction between n-decene adsorbed on t [...]

by Jéssica A.P. Ponciano  and Marcelo S. Batista

Received: 01 December 2021;  Published: 26 January 2022;  doi: 10.21926/cr.2201002

In this paper, the relationship between activity and structure of Cu2+ in different chemical environments of Cu-BETA, La2CuO4, and CuO nanocatalysts was systematically investigated for acetonitrile combustion. The study revealed that exchanged and octahedral species of Cu2+ coexist in Cu-BETA, while octahedral species are dominant in CuO and La2CuO4. All nanocatalysts achieved high conversion rates of acetonitrile, which rapidly increased with temperature. CuO and La2CuO4 led to the formation of undesired products [...]

by Sadeq Hamood Saleh Azzam  , Amreen Khanum  and Mohamed Afzal Pasha

Received: 30 September 2022;  Published: 15 February 2023;  doi: 10.21926/cr.2301007

2-Phenyl-4-arylmethylidene-5-oxazolinones were synthesized in very high yield by subjecting a mixture of an aryl aldehyde/heterocyclic aldehyde/cinnamaldehyde and hippuric acid in anhydrous acetic anhydride and catalytic Zn(OCOCH3)2·2H2O to ultrasonication at 35 KHz for 4 to 8 min. This method has many advantages: use of a green catalyst; yields are high, involves easy workup procedure, is energy efficient and economically feasible.

by Le Thanh Mai Pham  , Kai Deng  , Trent R. Northen  , Steven W. Singer  , Paul D. Adams  , Blake A. Simmons  and Kenneth L. Sale

Received: 26 July 2022;  Published: 20 September 2022;  doi: 10.21926/cr.2203028

Lignin is the most abundant renewable source of aromatics on earth, and conversion of it to chemicals and fuels is needed to build an economically viable renewable biofuels industry. Biological routes to converting lignin to fuels and chemicals involve depolymerizing lignin using lignin-degrading enzymes that catalyze the breaking of ether and carbon-carbon bonds in the phenolic and non-phenolic subunits of lignin. Laccases are a crucial class of lignin-degrading enzymes and are copper-containing enzymes capable of [...]

by Pan Xie  , Dongdong Du  , Cheng Xue  and Sanshan Shi

Received: 01 April 2022;  Published: 10 May 2022;  doi: 10.21926/cr.2202014

The process of light-induced C-H oxygenation is of high interest as it can be used for the construction of oxygenated compounds. Herein, we report a mild and general method for the efficient synthesis of aromatic ketones following the process of metal-free C-H oxygenation. With air as the oxidant, high functional tolerance was demonstrated, and the desired ketones were obtained in moderate to excellent yields at room temperature (25 oC). Mechanistic studies suggested that the oxidative transformation potentially oc [...]

by Dafné Silva  , Laís Nerys  , Carlos Silva  , Elizabeth Borba  , Tonny Leite  , Teresinha Silva  and Amanda Sena

Received: 27 May 2022;  Published: 25 August 2022;  doi: 10.21926/cr.2203024

Macambira plant (Bromelia laciniosa Mart. Ex Shult. & Schult. f.) is a species belonging to the family Bromeliaceae, which is distributed widely in the hinterlands of northeastern Brazil, from Bahia to Piauí states. The plants of this species contain an enzyme complex named bromelain, which has great potential for therapeutic applications. In the present study, bromelain derived from Bromelia laciniosa leaves was assessed for its thermodynamic properties and in vitro cytotoxic and healing activities. Bro [...]

by Suman Lahkar  , Richa Brahma  and Swapan Kumar Dolui

Received: 15 September 2022;  Published: 04 January 2023;  doi: 10.21926/cr.2301002

The development of noble metal-free catalyst for hydrogen evolution reaction (HER) is the primary challenge in fuel production to replace fossil fuels. Here, we have synthesized Fe-doped TiO2/PANI nanocomposite via facile in situ polymerization method and studied its electrocatalytic activity towards HER. The composite catalyzes HER efficiently with an overpotential value of -180 mV vs. RHE in 0.5 M H2SO4 solution to achieve the current density of 10 mA cm-2 and also possesses unique stability of 8 h. However, a un [...]

by Luiz Felipe da M. Rocha  , Leonardo C. Ferreira  , Maria de Fatima V. Marques  , Rodrigo S. Bitzer  and Marco Antônio Chaer Nascimento

Received: 18 May 2022;  Published: 06 July 2022;  doi: 10.21926/cr.2203020

We synthesized and spectroscopically characterized a new heterotrimetallic {Ti2Ni} ethylene (co)polymerization precatalyst containing one (α-diimine)NiBr2 and two (phenoxy-imine)TiCl4 scaffolds. Its calculated structure was investigated at the DFT B3LYP/LACVP** level. Our calculations showed that the titanium(IV) centers were in a slightly distorted trigonal bipyramidal environment, and the average Ti···Ni distance was 8.76 Å. The precatalyst was used for synthesizing polyethylene a [...]

by Girijesh Kumar

Received: 02 December 2024;  Published: 05 December 2024;  doi: 10.21926/cr.2404014

by Olushola S. Ayanda  , Cecilia C. Oforkansi  , Omolola H. Aremu  , Oluwakemi E. Ogunjemiluyi  , Ololade L. Olowoyeye  and Cecilia O. Akintayo

Received: 26 June 2022;  Published: 25 July 2022;  doi: 10.21926/cr.2203022

In this study, we investigated the degradation of amido black dye in an aqueous solution using ultra-violet (UV) light catalyzed by iron oxide nanoparticles (nano-Fe). The nano-Fe was synthesized by sodium borohydride reduction of ferric chloride solution and was characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), and X-ray fluorescence spectrophotometry (XRF). The SEM of the nano-Fe showed regular spherical particles, the XRD examination showed a weak and broad peak at Fe (1 1 0), and the [...]

by Charitha Thambiliyagodage  , Madara Jayanetti  , Geethma Ekanayake  , Amavin Mendis  , Heshan Liyanaarchchi  and Supuni Wijayawardana

Received: 10 April 2024;  Published: 13 June 2024;  doi: 10.21926/cr.2402006

Ilmenite is a mineral whose crystallinity can be altered by chemical treatment, producing TiO2 and iron and titanium-based metal nanocomposites, which are applicable mainly for photocatalysis. Porous and crystalline biomass-derived carbon materials include graphene oxide, reduced graphene oxide, graphitic carbon nitride, catalytically graphitized sucrose and chitosan, and activated carbon. Ilmenite-based metal oxides coupled with biomass-based carbon materials are effective in environmental remediation, especially [...]

by Anastasia Skonta  , Elena Gkantzou  , Konstantinos Spyrou  , Stamatia Spyrou  , Angeliki Polydera  , Dimitrios Gournis  and Haralambos Stamatis

Received: 31 July 2022;  Published: 08 October 2022;  doi: 10.21926/cr.2204032

3D printed PLA has already been demonstrated for several biotechnological applications, including enzymes immobilization. The prerequisites for an efficient screening assay include using small volumes of reagents, low cost, and rapid screening of large numbers of compounds and extracts. Hence, assays based on microtiter plates are predominant. Thus, designing and fabricating scaffolds on a similar scale, which could serve as immobilization carriers, and their recruitment in inhibitors screening studies is of great [...]

by Oreste Piccolo  , Elisabetta Parodi  and Antonella Petri

Received: 14 September 2022;  Published: 17 November 2022;  doi: 10.21926/cr.2204041

In this study, a PoC (Proof of Concept) of a possible biomass valorization of flax and camelina oilseed press cakes was presented. Biocatalyzed hydrolysis of residual oils and proteins extracted from these wastes was studied. The biotransformation of oils was performed using commercial immobilized lipases, including Amano PS, Amano AK, and Candida Antarctica Lipase B (CALB). Acylglycerols were partially or fully hydrolyzed using Amano PS and AK. Triglycerides were not hydrolyzed by CALB, which behaved differently. [...]

by Jiarui Fang  , Ziheng Li  , Xiruo Bai  , Yichu Zhang  , Jiahui Liu  , Dan Wang  and Ye Yao

Received: 10 May 2022;  Published: 04 July 2022;  doi: 10.21926/cr.2203018

TiO2 (001) crystal plane exhibits molecular adsorption and photocatalytic activity. The loading capacity of reactive oxygen species present on crystal planes helps in the significant improvement of catalytic activity. The methods of synthesis and conditions of existence significantly affect the molecular adsorption properties of crystal planes, which in turn affects the ability of the system to load reactive oxygen species. Herein, we report the simulation of the molecular adsorption behavior on the TiO2 (001) usin [...]

by Lin Xie  and Donald Kirk

Received: 09 June 2021;  Published: 16 September 2021;  doi: 10.21926/cr.2103003

Fe-rich alloys have been widely studied as catalyst materials for the cathodic oxygen reduction reaction (ORR) in hydrogen fuel cells, and many have shown high activities. The stability of Fe-rich catalysts has also been researched, and some studies have shown promising results using an accelerated stress test (AST), which uses a potential cycling method. However, for commercial fuel cell applications, such as standby power systems, the catalyst has to tolerate a high potential for a long period, which can not be r [...]

by Nathir A. F. Al-Rawashdeh

Received: 01 July 2025;  Published: 03 August 2025;  doi: 10.21926/cr.2503007

by Anjali Singh  , Kashish Ujla  and Smriti Shrivastava

Received: 25 January 2025;  Published: 19 June 2025;  doi: 10.21926/cr.2502004

Lignocelluloses are complex plant polysaccharides made of lignin, cellulose, and hemicellulose, and products made from these components find immense market potential. They can be effectively valorized to products related to bioenergy, bioplastics, food and nutrition, medication delivery systems, and other elements. Significant sources of lignocellulosic biomass include sugarcane bagasse, corn cob, rice straw, potato haulms, cocoa pods, etc. Enzyme-based valorization processes find immense potential, as they are eco [...]

by Tülin Avcı Hansu

Received: 25 December 2023;  Published: 15 May 2024;  doi: 10.21926/cr.2402005

In this study, by producing bifunctional material, hydrolysis, and supercapacitor applications were investigated. The carbon nanotube-supported Pt catalyst was prepared using the sodium borohydride (NaBH4) reduction. Surface characterization of the synthesized Pt/CNT catalyst was performed using scanning electron microscopy-energy dıstrıbutıon X-ray spectrometer (SEM-EDX), X-ray diffraction (XRD), and transmission electron microscopy (TEM). Hydrolysis experiments were performed after deciding on the appropriate ato [...]