by Marco Antonio Gaya de Figueiredo  , Luiza G. dos Santos  , Rômulo Luciano Nascimento  and Harrison Lourenço Corrêa

Received: 18 April 2024;  Published: 11 November 2024;  doi: 10.21926/jept.2404020

Hydrogen is crucial in various industrial sectors and can be obtained through different synthesis routes. However, a significant portion of its production still relies on chemical processes involving fossil fuels, resulting in hydrogen and the generation of greenhouse gases (GHGs) as the final byproduct. In alignment with the goals of the 2030 Agenda, where countries commit to implementing energy transition, hydrogen obtained through a green route has been increasingly explored by governmental and academic entities [...]

by Arnold Hendharto Widdhiarta  , Yousuke Shimaura  , Ichiro Nagai  , Takayuki Shibata  and Yutaka Moritomo

Received: 15 February 2022;  Published: 30 March 2022;  doi: 10.21926/jept.2201011

We fabricated three thermo-rechargeable batteries using low-cost transition metal hexacyanoferrate and determined the thermal voltage (Vcell) and discharge capacity (Qcell) per unit weight of the total active material in the cathode and anode. The obtained values were compared with the calculated values, which were determined by analyzing the temperature and capacity coefficients of the redox potential.

by Oleksandr Skrylnyk  , Emilie Courbon  , Nicolas Heymans  and Marc Frère

Received: 18 December 2020;  Published: 14 April 2021;  doi: 10.21926/jept.2102017

Hybrid solar thermal systems are considered to be a promising solution for delivering clean thermal energy for the building sector, especially while combining them with other renewable energy sources. Usually, solar energy production does not match the thermal energy demand, and hence the energy storage must be integrated. Thermochemical energy storage is adapted particularly to be used along with solar thermal applications. In this article, the design of the combined solar thermochemical energy storage system is p [...]

by Rui Wang  , Husain E. Ashkanani  , Bingyun Li  and Badie I. Morsi

Received: 01 August 2022;  Published: 13 October 2022;  doi: 10.21926/jept.2204033

A unique two-Pathways process using aqueous sodium glycinate for CO2 capture from a split flue gas stream emitted from 600 MWe post-combustion coal power plant was developed in Aspen Plus v.10. The split gas flow rate used was 44.75 ton/h and contained 0.0023 mol% SO2 and 13.33 mol% CO2. The process includes a washing unit, a CO2 absorption unit, a reverse osmosis unit, and a solvent regeneration unit or an ultrafiltration unit. The washing unit uses deionized water to completely remove SO2 and the CO2 absorption u [...]

by Peter Leary  and Peter Malin

Received: 30 November 2020;  Published: 19 March 2021;  doi: 10.21926/jept.2101013

In interest of accurately modelling wellbore production in convective geothermal systems, we draw attention to two approaches to numerical simulation of crustal fluid flow. The historical "strong" approach simulates the fluid mass conservation condition on a localised finite difference mesh approximation to poroelastic continua. The more flexible "weak" approach globally enforces fluid mass conservation by in effect integrating over all numerical mesh cells. Strong formulation crustal flow simulation emerged from n [...]

by Hamidreza Shamsi  , Ehsan Haghi  , Manh-Kien Tran  , Sean Walker  , Kaamran Raahemifar  and Michael Fowler

Received: 11 March 2022;  Published: 25 December 2022;  doi: 10.21926/jept.2204043

Road traffic is a significant source of air pollution that has a harmful impact on human health. To reduce the health and environmental impacts of fossil fuel consumption in the transportation sector, many countries have implemented policies to promote the deployment of electric vehicles (EVs). A vital factor to consider when designing policies to support EV use is the monetized health impacts of fossil fuel consumption. This research aims to investigate the health benefit of replacing internal combustion engine ve [...]

by Jacob Ladenburg

Received: 28 April 2020;  Published: 12 August 2020;  doi: 10.21926/jept.2003015

Visual external costs are significant elements in the cost-benefit analysis of wind farm locations. This has been demonstrated well in the literature. However, in the assessment of the visual costs, a large share of the earlier studies used no or only simplistic visualizations of the visual impacts at stake. The cost estimates thus rely on the respondents’ ability to imagine the visual impacts associated with wind turbines of different sizes and at different locations. This has been argued to potentially reduce the [...]

by Regiani Aparecida de Almeida  , Ricardo Vicente de Paula Rezende  , Flavia Aparecida Reitz Cardoso  and Lucio Cardozo Filho

Received: 17 December 2022;  Published: 18 April 2023;  doi: 10.21926/jept.2302016

In this work with CFD simulations, the evaluation of the supercritical anti-solvent (SAS) process for producing nanoparticles from an expanded solution of ethanol/solute in carbon dioxide is reported. The influence of the solution and antisolvent flow rates on mean particle size, the flow dynamic, and the supercritical mixture's jet velocity must be well established in the literature and analyzed. The high flow rate of the anti-solvent resulted in increased mean particle sizes for all studied cases. At the lowe [...]

by Carsten Croonenbroeck  and David Hennecke

Received: 20 July 2021;  Published: 25 October 2021;  doi: 10.21926/jept.2104044

In this study, we address the wind farm layout optimization (WFLO) problem and tackle the issue of optimal turbine placement by incorporating additional aspects of an economically driven target function. Firstly, we have analyzed the effect of wind direction on a given turbine arrangement. Based on the direction-dependent wake pattern, practitioners sometimes shut down certain turbines on their farms. Our method computes which turbines should be shut down in which wake situation. On this basis, we have developed a [...]

by Nicholas J Cook

Received: 14 April 2021;  Published: 25 June 2021;  doi: 10.21926/jept.2102027

A refined and extended version of the Offset Elliptical Normal mixture model has been developed to parameterise the seasonal diurnal wind vector automatically. Automated using R scripts, the method eliminates any potential risk of confirmation bias posed by the manual supervision in the original method. Refinements to the method include the latest algorithms for clustering of Gaussian mixtures, with Bayesian regularisation to set the number of components and to limit the predisposition to overfit. A new extension u [...]

by Daming Zhang

Received: 21 January 2022;  Published: 07 March 2022;  doi: 10.21926/jept.2201008

In this paper, a method for operating AC microgrids in both off-grid or standalone and grid-connected modes is proposed to minimize the use of energy storage by increasing the number of PV panels and curtailing their output power. When the intensity of daylight decreases, power is imported from the main grid through an AC/DC/AC converter or solid-state transformers in parallel to compensate for the shortage. By using a three-phase transformer in Δ-Y connection with Y’s neutral connected to its local grounding syste [...]

by Kenji Amagai  , Hiroto Kotake  , Masahiro Munemura  , Sawako Shigeto  and Masayuki Horio

Received: 10 October 2022;  Published: 02 February 2023;  doi: 10.21926/jept.2301005

This paper describes the development of low-speed electric community buses (LSECBs) designed by the author's group and their spread situation in Japan. LSECBs are electric vehicles that can travel on public roads at speeds of less than 5.56 m/s (20 km/h). The university, local government, local businesses, and residents with a co-design approach developed the LSECBs. They have various advantages such as safety due to low speed and low energy consumption. In particular, the LSECBs have features not found in ordinary [...]

by Lara T. C. Mota  , Igor M. Figueredo  , F. Murilo T. Luna  , Rodrigo S. Vieira  , Célio L. Cavalcante Jr.  and M. Alexsandra S. Rios

Received: 26 September 2022;  Published: 22 December 2022;  doi: 10.21926/jept.2204042

In this study, the oxidative stability of the cottonseed oil biodiesel (CB) and soybean oil biodiesel (SB) was investigated by two methodologies, Rancimat and Differential Scanning Calorimetry (DSC), using samples fresh and aged (mid-term storage condition (100 days)). The biodiesel samples were synthesized by transesterification and characterized by specific mass, kinematic viscosity, acidity value, ester content, viscosity index, and peroxide value. The activation energy (Ea), Arrhenius pre-exponential factor (Z) [...]

by Jeggathishwaran Panisilvam  , Peng Cheng Wang  and Hui An

Received: 26 March 2022;  Published: 13 July 2022;  doi: 10.21926/jept.2203024

Reducing and conserving fuel usage is pivotal for any engineering system for the development of a sustainable energy solution. Proton exchange membrane fuel cells (PEMFCs) are one of the promising renewable energy systems that consume hydrogen as their source of fuel to generate electricity. This paper investigate the necessity of the constant supply of fuel (hydrogen) in the PEMFC system to ensure stable operation. We propose that a dynamic supply of fuel could help achieve similar performance and reduce the amoun [...]

by Rajesh Karki  and Binamra Adhikari

Received: 02 April 2024;  Published: 07 August 2024;  doi: 10.21926/jept.2403015

The integration of cyber and physical layer of the grid has not only introduced a microscopic spectacle to observe and ensure the efficient flow of electricity but has also exposed the interdependencies of the network. These cyber-physical interdependencies are often exploited in the form of cyber-attacks that can disable a grid introducing substantial financial losses and observable social repercussions. Thus, it is important to address the impending Achilles heel by devising pragmatic approaches to comprehensibly [...]

by Journal of Energy and Power Technology Editorial Office

Received: 05 January 2022;  Published: 06 January 2022;  doi: 10.21926/jept.2201001

The editors of Journal of Energy and Power Technology would like to express their sincere gratitude to the following reviewers for assessing manuscripts in 2021. We greatly appreciate the contribution of expert reviewers, which is crucial to the journal's editorial process. We aim to recognize reviewer contributions through several mechanisms, of which the annual publication of reviewer names is one. Reviewers receive a voucher entitling them to a discount on their next LIDSEN publication and can download a cer [...]

by Michel Boukar  , Etienne Tchoffo Houdji  , Dimitri Valdes Tchuindjang Kwatchie  , Guy Bertrand Tchaya  and Danwe Raidandi

Received: 25 March 2024;  Published: 01 August 2024;  doi: 10.21926/jept.2403014

Many sensible heat storage materials are regularly used as thermal energy storage (TES) systems to improve the efficiency of solar dryers. The present work focuses on the effects of the volume and particle sizes of a volcanic stone (pozzolan) for the same purpose. Samples soaked in matt black and without soaking were also considered. Heat charge and discharge tests were carried out by exposing the pozzolan contained in a solar collector of the direct solar dryer (DSD) and indirect solar dryer (ISD) to the sun. Char [...]

by Gerasimos Rigatos  , Masoud Abbaszadeh  , Bilal Sari  and Pierluigi Siano

Received: 07 December 2022;  Published: 11 May 2023;  doi: 10.21926/jept.2302018

The article aims at optimizing six-phase induction generator-based renewable energy systems (6-phase IGs or dual star induction generators) through a novel nonlinear optimal control method. Six-phase induction generators appear to be advantageous compared to three-phase synchronous or asynchronous power generators, in terms of fault tolerance and improved power generation rates. The dynamic model of the six-phase induction generator is first written in a nonlinear and multivariable state-space form. It is proven th [...]

by Mikhail Pylnev  , Hussain Al-Alawadhi  and Nouar Tabet

Received: 21 September 2022;  Published: 25 November 2022;  doi: 10.21926/jept.2204038

The most commonly used process for fabricating perovskite solar cells is based on wet chemistry, which greatly limits the choice of materials suitable for optimizing the performance of the device. We developed a new approach for the fabrication of perovskite-based solar cells. In the smart stacking process, the perovskite solar cell was assembled by stacking two pieces of perovskite films prepared separately. A working perovskite solar cell was developed with PCE = 0.78% and the perovskite layer was analyzed with X [...]

by Gabriela Martínez-Machado  , Laura Arely López-Gámez  , Litzy Yazmin Alvarado-Mata  , Roberto Muñoz-García  , Jenny Priscila Salinas-Mireles  , Ivan Artemio Corral-Guerrero  , Maria Jose Castro-Alonso  , Jazel Doménica Sosa-Martínez  , Miriam Paulina Luévanos Escareño  , Ayerim Yedid Hernández-Almanza  and Nagamani Balagurusamy

Received: 20 February 2025;  Published: 13 May 2025;  doi: 10.21926/jept.2502010

The global production of biomethane is rapidly emerging as a sustainable alternative to fossil fuels for energy generation. Biogas, where methane (CH4) is usually one of the main components, is generated through the anaerobic digestion (AD) of various organic substrates, including animal manure, organic wastes, and wastewater. The efficiency of the AD process depends on key operational parameters and reactor designs that optimize microbial activity and gas yield. However, inhibitory compounds such as heavy metals, [...]

by Shih-Ang Hsu

Received: 13 December 2020;  Published: 06 July 2021;  doi: 10.21926/jept.2103031

In September 2020 Hurricane Sally affected the north central Gulf of Mexico. Making use of the anemometers data available at 4 oil rigs over the affected region, it is found that, when the atmospheric stability was near-neutral, the gust factor (G) decreases linearly with height from approximately 1.28 at 35m above the sea surface to 1.18 at 160 m. In other words, G decreases linearly at the rate around 8% per 100 m from the typical hub height to beyond common hub height. Based on the linear equation found in this [...]

by Qin Xu  , Kang Nai  and Valery Melnikov

Received: 05 August 2022;  Published: 13 October 2022;  doi: 10.21926/jept.2204034

By using long pulses with extended dwelling time, lowered pulse repetition frequency (PRF) and reduced Nyquist velocity, the radar measurement capability can be enhanced to increase clear-air Doppler velocity data coverage (which is beneficial for radar wind analysis and data assimilation and motivated our previous study). This potential capability is further explored (beyond our previous study) by not only modifying the existing operational clear-air scan mode with a lowered PRF and reduced the Nyquist velocity (t [...]

by George Z. Voyiadjis  and Peter I. Kattan

Received: 27 October 2020;  Published: 10 May 2021;  doi: 10.21926/jept.2102021

A robust mathematical method for the characterization of damage in carbon nanotubes is presented the presentation here is limited to elasticity. In this regard, the second and third order elastic stiffnesses are employed. All this is based on damage mechanics. The hypotheses of elastic strain equivalence and elastic energy equivalence are utilized. A new damage variable is proposed that is defined in terms of the surface area. This is in contrast to the classical damage variable which is defined in terms of the cro [...]

by Abdel Zaro  , Spencer Jones  and Ethan Languri

Received: 31 August 2023;  Published: 16 November 2023;  doi: 10.21926/jept.2304035

In this paper, an efficient industrial wastewater and leachate evaporation method is proposed and tested experimentally. The goal of this study is to investigate whether the addition of a carbon foam (CF) porous layer can lead to energy savings by evaporating more water mass per unit of energy input. The standard boiling evaporator layout was redesigned by placing the heating element in the upper region of the tank and CF underneath the heat source. The CF purposed to localize the energy in an area by the water' [...]

by Gerald Jandl  , Rainer Horn  , Richard Schroeder  , Kai-Uwe Eckhardt  and Peter Leinweber

Received: 23 November 2022;  Published: 22 March 2023;  doi: 10.21926/jept.2301012

The increasing number of biogas plants with various digested organic materials and output of digestates calls for more detailed investigations of their suitability as soil amendments. In a trial in Northern Germany two replicate plots each were treated with fresh or prolonged fermented digestate to investigate the influence of digestates on the composition of soil organic matter (SOM). The relative proportions of relevant SOM compound classes were determined by pyrolysis-field ionization mass spectrometry (Py-FIMS) [...]