by Arnold Hendharto Widdhiarta  , Yousuke Shimaura  , Ichiro Nagai  , Takayuki Shibata  and Yutaka Moritomo

Received: 15 February 2022;  Published: 30 March 2022;  doi: 10.21926/jept.2201011

We fabricated three thermo-rechargeable batteries using low-cost transition metal hexacyanoferrate and determined the thermal voltage (Vcell) and discharge capacity (Qcell) per unit weight of the total active material in the cathode and anode. The obtained values were compared with the calculated values, which were determined by analyzing the temperature and capacity coefficients of the redox potential.

by Rajesh Karki  and Binamra Adhikari

Received: 02 April 2024;  Published: 07 August 2024;  doi: 10.21926/jept.2403015

The integration of cyber and physical layer of the grid has not only introduced a microscopic spectacle to observe and ensure the efficient flow of electricity but has also exposed the interdependencies of the network. These cyber-physical interdependencies are often exploited in the form of cyber-attacks that can disable a grid introducing substantial financial losses and observable social repercussions. Thus, it is important to address the impending Achilles heel by devising pragmatic approaches to comprehensibly [...]

by Meenal Jain  , Meenakshi Mital  and Matt Syal

Received: 21 November 2021;  Published: 14 April 2022;  doi: 10.21926/jept.2202014

India is a rapidly developing nation and is heavily dependent on fossil fuels. Renewable energy presents an attractive solution to the growing challenges concerning energy needs. Solar energy is abundant in India, and thus, its application and use are rapidly advancing. This study assesses various government initiatives for off-grid Solar Photovoltaic/Solar Water Heating systems for commercial establishments in India and elucidates the need for improvements in their implementation, highlighting the problems in avai [...]

by George Z. Voyiadjis  and Peter I. Kattan

Received: 27 October 2020;  Published: 10 May 2021;  doi: 10.21926/jept.2102021

A robust mathematical method for the characterization of damage in carbon nanotubes is presented the presentation here is limited to elasticity. In this regard, the second and third order elastic stiffnesses are employed. All this is based on damage mechanics. The hypotheses of elastic strain equivalence and elastic energy equivalence are utilized. A new damage variable is proposed that is defined in terms of the surface area. This is in contrast to the classical damage variable which is defined in terms of the cro [...]

by Kenji Amagai  , Hiroto Kotake  , Masahiro Munemura  , Sawako Shigeto  and Masayuki Horio

Received: 10 October 2022;  Published: 02 February 2023;  doi: 10.21926/jept.2301005

This paper describes the development of low-speed electric community buses (LSECBs) designed by the author's group and their spread situation in Japan. LSECBs are electric vehicles that can travel on public roads at speeds of less than 5.56 m/s (20 km/h). The university, local government, local businesses, and residents with a co-design approach developed the LSECBs. They have various advantages such as safety due to low speed and low energy consumption. In particular, the LSECBs have features not found in ordinary [...]

by Xiaofei Qin  , Yongren Feng  , Lejun Wu  , Zhongjian Tan  , Yanmin Zhou  and Wilson Chin

Received: 12 April 2023;  Published: 10 July 2023;  doi: 10.21926/jept.2303023

In conventional wireline and LWD/MWD formation testing, downhole predictions for rock and fluid properties are based on simplified Darcy flow models, but only for mathematical expediency. These require initially constant pressures that are uniform throughout the reservoir. This limitation precludes common applications in overbalanced drilling, so that supercharge or near-well invasion effects - associated with rapidly decreasing pressures at the sandface where pressures are measured - are completely ignored. Such 1 [...]

by Mikhail Pylnev  , Hussain Al-Alawadhi  and Nouar Tabet

Received: 21 September 2022;  Published: 25 November 2022;  doi: 10.21926/jept.2204038

The most commonly used process for fabricating perovskite solar cells is based on wet chemistry, which greatly limits the choice of materials suitable for optimizing the performance of the device. We developed a new approach for the fabrication of perovskite-based solar cells. In the smart stacking process, the perovskite solar cell was assembled by stacking two pieces of perovskite films prepared separately. A working perovskite solar cell was developed with PCE = 0.78% and the perovskite layer was analyzed with X [...]

by Lara T. C. Mota  , Igor M. Figueredo  , F. Murilo T. Luna  , Rodrigo S. Vieira  , Célio L. Cavalcante Jr.  and M. Alexsandra S. Rios

Received: 26 September 2022;  Published: 22 December 2022;  doi: 10.21926/jept.2204042

In this study, the oxidative stability of the cottonseed oil biodiesel (CB) and soybean oil biodiesel (SB) was investigated by two methodologies, Rancimat and Differential Scanning Calorimetry (DSC), using samples fresh and aged (mid-term storage condition (100 days)). The biodiesel samples were synthesized by transesterification and characterized by specific mass, kinematic viscosity, acidity value, ester content, viscosity index, and peroxide value. The activation energy (Ea), Arrhenius pre-exponential factor (Z) [...]

by Gerald Jandl  , Rainer Horn  , Richard Schroeder  , Kai-Uwe Eckhardt  and Peter Leinweber

Received: 23 November 2022;  Published: 22 March 2023;  doi: 10.21926/jept.2301012

The increasing number of biogas plants with various digested organic materials and output of digestates calls for more detailed investigations of their suitability as soil amendments. In a trial in Northern Germany two replicate plots each were treated with fresh or prolonged fermented digestate to investigate the influence of digestates on the composition of soil organic matter (SOM). The relative proportions of relevant SOM compound classes were determined by pyrolysis-field ionization mass spectrometry (Py-FIMS) [...]

by Cherechi Ndukwe  , M. Tariq Iqbal  , Jahangir Khan  and Mohsin Jamil

Received: 18 April 2022;  Published: 26 June 2022;  doi: 10.21926/jept.2202022

One important aspect toward proper and stable functioning of a communication-based controlled microgrid is data transmission. Consequently, an analysis of the effect of data transmission delay is of significance for any chosen communication protocol. This paper focuses on the effect of employing LoRa for data transfer at the secondary control level of a standalone DC microgrid. It analyses the effect of LoRa transmission delay on the dynamic performance of DC microgrids. This paper simulates a community DC microgri [...]