by Gabriela Martínez-Machado  , Laura Arely López-Gámez  , Litzy Yazmin Alvarado-Mata  , Roberto Muñoz-García  , Jenny Priscila Salinas-Mireles  , Ivan Artemio Corral-Guerrero  , Maria Jose Castro-Alonso  , Jazel Doménica Sosa-Martínez  , Miriam Paulina Luévanos Escareño  , Ayerim Yedid Hernández-Almanza  and Nagamani Balagurusamy

Received: 20 February 2025;  Published: 13 May 2025;  doi: 10.21926/jept.2502010

The global production of biomethane is rapidly emerging as a sustainable alternative to fossil fuels for energy generation. Biogas, where methane (CH4) is usually one of the main components, is generated through the anaerobic digestion (AD) of various organic substrates, including animal manure, organic wastes, and wastewater. The efficiency of the AD process depends on key operational parameters and reactor designs that optimize microbial activity and gas yield. However, inhibitory compounds such as heavy metals, [...]

by Hossein Akbari  , Seyed Mojtaba Hosseinnia  , Mikhail Sorin  , Christopher Reddick  and Dominic Laperle

Received: 13 January 2022;  Published: 12 April 2022;  doi: 10.21926/jept.2202013

Heat integration techniques such as pinch analysis can play a significant role in saving energy in the design of buildings. The application of pinch analysis in this sector encounters difficulties due to the highly time-dependent behavior of energy streams such as waste heat and solar thermal collectors, as well as the possible need for heat storage units (HSUs). The existing pinch models in the literature either bear little relation to reality because they ignore the time dependency of the streams, or they do not [...]

by Jamie A. Chin  and Wilson C. Chin

Received: 12 February 2022;  Published: 23 May 2022;  doi: 10.21926/jept.2202018

Flows in multi-branch piping systems are modeled for linear Newtonian and nonlinear Power Law, Bingham Plastic and Herschel-Bulkley fluids. The nonlinear models are often used to describe multiphase fluids consisting of liquid and solid phases, including cement slurries and drilling muds in petroleum engineering. Rheological and heterogeneous multiphase effects are important to blood flows in single and bifurcated arteries, capillaries and veins – biological applications are also emphasized to highlight their incre [...]

by Abdel Zaro  , Spencer Jones  and Ethan Languri

Received: 31 August 2023;  Published: 16 November 2023;  doi: 10.21926/jept.2304035

In this paper, an efficient industrial wastewater and leachate evaporation method is proposed and tested experimentally. The goal of this study is to investigate whether the addition of a carbon foam (CF) porous layer can lead to energy savings by evaporating more water mass per unit of energy input. The standard boiling evaporator layout was redesigned by placing the heating element in the upper region of the tank and CF underneath the heat source. The CF purposed to localize the energy in an area by the water' [...]

by Lotta Lounasmeri

Received: 26 November 2021;  Published: 06 April 2022;  doi: 10.21926/jept.2202012

This paper examines the building of a new nuclear plant as a greenfield operation in Pyhäjoki, Finland. A newly-founded energy company, Fennovoima, was granted a license by the Finnish parliament to build a new power plant in 2010. In the years following this Decision in Principle the project faced several obstacles. Through interviews with key actors, this paper identifies the interests and core beliefs associated with building the plant. It posits that, in Finland, the underlying ideas and values surrounding nucl [...]

by Alpha Chukwumela Ajie  , Mohammed Moore Ojapah  and Endurance Ogheneruona Diemuodeke

Received: 07 February 2023;  Published: 20 June 2023;  doi: 10.21926/jept.2302020

With their higher sustainability index, biofuels, environmentally-friendly and renewable nature is a viable alternative energy source in the transportation sector. This study presents the effect of waste cooking oil (WCO) biodiesel on performance, combustion, and emission from a compression ignition engine. The biodiesel was blended with diesel in varying proportions of 5% biodiesel and 95% diesel (designated as B5), 10% biodiesel in diesel (B10), 15% biodiesel in diesel (B15), 20% biodiesel in diesel (B20), 50% bi [...]

by Owen Sedej  , Eric Mbonimpa  , Trevor Sleight  and Jeremy Slagley

Received: 18 February 2022;  Published: 18 August 2022;  doi: 10.21926/jept.2203027

Waste-to-Energy technologies have the potential to dramatically improve both the natural and human environment. One type of waste-to-energy technology that has been successful is gasification. There are numerous types of gasification processes and in order to drive understanding and the optimization of these systems, traditional approaches like computational fluid dynamics software have been utilized to model these systems. The modern advent of machine learning models has allowed for accurate and computationally ef [...]

by Sadmanul Hoque  , Md. Rashidul Islam  , Md Shafiullah  , Saymun Adnan  and Md. Samiul Azam

Received: 18 June 2023;  Published: 28 September 2023;  doi: 10.21926/jept.2303030

In an electric power system operation, the main goal of economic dispatch (ED) is to schedule the power outputs of committed generating units efficiently. This involves consideration of relevant system equality and inequality constraints to meet the required power demand at the lowest possible operational cost. This is a challenging optimization problem for power system operators that can be dealt with efficient meta-heuristic algorithms. This article uses a recent meta-heuristic approach named the generalized norm [...]

by Koorosh Goudarzi  and Mohammad Reza Zare

Received: 19 April 2022;  Published: 08 June 2022;  doi: 10.21926/jept.2202020

Passenger and commercial internal combustion engines have relatively large dissipated thermal energy sources that can be used for initiating thermodynamic refrigeration cycles at low temperatures while improving engine efficiency. Researchers have focused on combined power-refrigeration cycles in past studies. This paper presents the operation and performance of a new combined refrigeration system driven by waste heat recovery within the internal combustion engines. For this purpose, the effects of several paramete [...]

by Vincent Anayochukwu Ani

Received: 06 August 2023;  Published: 24 January 2024;  doi: 10.21926/jept.2401002

Energy is a prerequisite to running health facilities and is, therefore, key to the success of the service. Karshi primary healthcare centre (PHC) facility is confronted with an unreliable power supply that leads to a high cost of generating power from diesel to operate its equipment. This facility needs a sustainable and reliable electricity supply and therefore a change in their energy system to enable it improve its quality of healthcare delivery services. A solar energy-based electricity generation system that [...]