A New Model for the Shear of Atomic PlanesAbstract The article presents a model that describes the shear of atomic planes in crystalline solids by accounting for their electronic structure. Previous studies have shown that an isotropic distribution of valence electrons leads to a spherically symmetric interatomic potential, which affects the stabili [...] 131 397 |
Acknowledgment to Reviewers of Recent Progress in Materials in 2025Abstract The editors of Recent Progress in Materials would like to express their sincere gratitude to the following reviewers for assessing manuscripts in 2025. We greatly appreciate the contribution of expert reviewers, which is crucial to the journal's editorial process. We aim to reco [...] 370 890 |
Rapid Green Synthesis of Silver Nanoparticles and Alginate-Silver Nanocomposite Beads Using Mashmoom (Ocimum basilicum), a Bahraini Household Medicinal HerbAbstract The study focuses on the rapid green synthesis of silver nanoparticles (AgNPs) and alginate-silver nanocomposite (Alg-AgNc) beads using sweet basil or Mashmoom (Ocimum basilicum), a common household medicinal herb in Bahrain. The aqueous extract of mashmoom was used as a reducin [...] 582 2044 |
Deep Learning Approaches for Predicting Strain Energy in Heterogeneous MaterialsAbstract This paper investigates data-driven strain energy prediction for heterogeneous elastic materials using the Mechanical MNIST benchmark dataset (60,000 28 × 28 stiffness maps by precomputed finite-element results). The results by classical regression models (linear regression, random forest, and gradi [...] 755 2779 |
Effect of EVA on the Unnotched Impact Toughness of PP/HDPE/EVA Blendsby
Duc Duy Huynh
,
Hoang Phuc Nguyen
,
Tran Quoc Thang Nguyen
,
Thi Hong Nga Pham
,
Quan Anh Pham
,
Thi Van Anh Duong
,
Van Huong Hoang
,
Xuan Tien Vo
and
Vinh Tien Nguyen
Abstract Beverage bottle caps are usually made from two primary materials: PP and HDPE. In this study, the evaluation criteria were the unnotched impact toughness and the microstructure of PP/HDPE/EVA samples produced by injection molding. The samples were tested according to ASTM D256. PP/HDPE/EVA blends we [...] 969 4527 |
Bioremediation of Organic Compounds and Trace Metals from Landfill Leachate Using Lactobacillus kefiri Strains: A Sustainable Approach Based on Facultative Treatmentby
Yasmin Cherni
,
Ridha Elleuch
,
Cristian Botta
,
Luca Cocolin
,
Amjed Kallal
,
Ismail Trabelsi
and
Lobna Elleuch
Abstract The sustainable management of water resources is increasingly recognized as a critical component of environmental conservation and socio-economic development. Among the most challenging aspects of wastewater treatment is the effective remediation of landfill leachate, a complex and highly polluted e [...] 685 3443 |
Effect of Oil Palm Broom Fiber on the Mechanical Properties of Rice Husk Ash–Blended ConcreteAbstract The high carbon footprint of cement production and the cost and environmental impact of steel reinforcement make conventional concrete unsustainable for long-term use. Reducing cement consumption and identifying sustainable, cost-effective alternatives to steel are critical for lowering construction [...] 2731 11679 |
Quantum Diamonds and the Future of Advanced Processors, Review on Benefits and ChallengesAbstract Nowadays, the development of advanced processors plays a key role in the progress of humanity and the discovery of new sciences, and quantum computers play an essential role in this regard. In this regard, the development of new generation processors is necessary for the development of quantum compu [...] 3367 11820 |
An Overview of Circular Economy Approaches for PlasticsAbstract Plastic pollution has received worldwide attention due to its extensive environmental and health implications. The circular economy has emerged as a potential solution to plastic pollution. This overview comprehensively presents different plastic circular economy approaches and discusses their advan [...] 2758 26130 |
Development of Parametric Voronoi-Based Scaffolds for Trabecular Bone Tissue Replacement Using Additive Manufacturingby
Gabriel de Souza Vieira Bié
,
Zilda de Castro Silveira
,
Rafael Vidal Aroca
and
Marcia Cristina Branciforti
Abstract Tissue engineering is a technique for regenerating living tissue using portions of the patient's tissue, which are dissociated into cells and cultured on biological or synthetic supports before being transferred to the patient. In this context, the present study seeks to develop implant models (scaf [...] 1150 6439 |
Emerging Progress in Nanotechnological Influence on Polymeric Textile Finishingby
Obumneme Emmanuel Ezeani
,
Christopher Igwe Idumah
,
Ifeanyi Emmanuel Okoye
and
Chioma Joan Ikebudu
Abstract Nanotechnology has revolutionized the textile industry by introducing innovative finishing techniques that enhance the durability and performance of textile materials and the application of nanoscale/nanoparticles/nanomaterials and processes to improve the properties and performance of textiles. The [...] 2519 20420 |
Quantitative Evaluations on Harmonic and Anharmonic Lattice Thermal Capacity of PolymersAbstract So-called ‘Generalized Skettrup Model(s)’ (GSMs) of different (1D, 2D, 3D) spatial dimensionalities are used at simulations on temperature-dependent harmonic and anharmonic fractions of lattice thermal capacity of polyethylene and polypropyle [...] 828 4784 |
Graphene Quantum Dots from Synthesis to Innovation for Advanced Optics and Bio-Optics TrendsAbstract The generation of non-classical light with improved performances within tiny sizes, intervals of lengths, and diameters is still a challenge. The generation of variable wavelengths associated with different frequencies of energy modes produced from new sources of emitters within confined scales from [...] 2155 9894 |
A Review on Metal Additive Manufacturing - Types, Applications and Future Trendsby
Muhammad Qasim Zafar
,
Ramisha Sajjad
,
Muhammad Tuoqeer Anwar
,
Muhammad Salman Mustafa
,
Naveed Husnain
,
Anas Bin Aqeel
and
Muhammad Bilal Khan
Abstract Metal Additive Manufacturing (MAM) process has been established as an industrial process for customized and intricate metallic components. It is one of the growing technologies proving its potential in numerous fields by introducing the latest processing methods. The significant growth in this techn [...] 5769 57572 |
Emerging Advances in 3-D & 4-D Printing of Polymeric Nanoarchitectures & Multifacet ApplicationsAbstract 3-Dimension printing (3-DPT) or additive manufacturing (AM) technology has been utilized for a while in the construction of customized 3-D objects utilizing computer software such as computer-aided design (CAD). However, the emergence of an innovative and new four-dimensional printing (4-DPT) has en [...] 2190 7983 |
Novel In-Situ Synthesis Techniques for Cellulose-Graphene Hybrids: Enhancing Electrical Conductivity for Energy Storage ApplicationsAbstract This study investigates the hypothesis that diverse synthesis techniques can yield cellulose-graphene hybrids with tailored properties for specific applications, enabling advancements in flexible electronics, energy storage, environmental remediation, and biomedical devices. We examined and compared [...] 3557 13591 |
Recent Developments in Synthesis Techniques and Microwave Absorption Performance of Materials Based on Molybdenum Disulfide (MoS2) with Metal Oxides: A Reviewby
Yusuf Sani
,
Raba’ah Syahidah Azis
,
Ismayadi Ismail
,
Yazid Yaakob
,
Chen Soo Kien
,
Mohd Mustafa Awang Kechik
and
Lim Kean Pah
Abstract The widespread usage of various wireless equipment in many facets of life has significantly contributed to the severe pollution caused by electromagnetic radiation. Thankfully, scientists have created materials that can absorb microwave radiation and convert dangerous electromagnetic waves into othe [...] 2904 18772 |
Valorization of Agroindustrial Waste as Biosorbent of Lead (II) in Solution and its Reuse in the Manufacture of Building Bricksby
Melisa S. Romano
,
Valeria Corne
,
Ricardo R. Azario
,
Emiliano Centurión
and
María del Carmen García
Abstract Lead is a non-biodegradable toxic heavy metal. Biosorption is a simple, cost-effective and eco-friendly method for remediating lead-contaminated environments. Additionally, rice husk is a highly available residual biomass that can be used as a biosorbent. This study aimed to analyze the biosorption [...] 1007 4976 |
Acknowledgment to Reviewers of Recent Progress in Materials in 2024Abstract The editors of Recent Progress in Materials would like to express their sincere gratitude to the following reviewers for assessing manuscripts in 2024. We greatly appreciate the contribution of expert reviewers, which is crucial to the journal's editorial process. We aim to reco [...] 695 3358 |
Construction & Demolition Waste and Circular Economy: The Case Study of a Brazilian CityAbstract Construction and demolition waste (CDW) is a significant waste stream in Brazil. It represents 38.2% of the total CDW and MSW streams. The recycling of CDW in Brazil is estimated to be at least 7.2% by weight (collected CDW) or about 15% by volume (produced CDW). Therefore, only a tiny part of CDW i [...] 1887 15399 |
Mechanical Characterization of a Tunable 3-D Collagen-Hyaluronic Acid Hydrogel for Use in Cell Cultureby
Jared Tucker
and
Victor Lai
Abstract Many cells demonstrate variances in behavior due to their cell culture environment. To provide a mechanically-tunable, tissue-like environment, a 3D hydrogel for cell culture was formulated using collagen (Col) and hyaluronic acid (HA) to help provide a system for studying these dynamic cellular res [...] 1224 7145 |
Viral/Non-Viral Vectors in DNA/RNA Delivery TechnologyAbstract Viral and non-viral vectors for nucleic acids (DNA/RNA) therapeutics are important in development of pharmaceutical industries. Although viral vectors have shown significant impact in transfection of DNA/RNA, but numerus studies have shown that non-viral vectors are also effective for the safe and t [...] 1883 8040 |
Current Advancements in the Behavior Analysis of EPDM Elastomers in Peripheral Applications of the Cathodic Side of PEMFC Systemsby
Daniel Foltuț
and
Viorel-Aurel Șerban
Abstract This review examines the latest developments in the study of how Ethylene Propylene Diene Monomer (EPDM) elastomers behave in peripheral applications of Proton Exchange Membrane Fuel Cells (PEMFCs), specifically on the cathodic side. The review highlights the crucial role of EPDM in maintaining the [...] 1350 10357 |
Research Progress in Enhancing Proton Conductivity of Sulfonated Aromatic Polymers with ZIFs for Fuel Cell ApplicationsAbstract The escalating global temperatures and their adverse effects underscore the growing imperative for the widespread adoption of clean fuels, notably hydrogen. Proton Exchange Membrane Fuel Cells (PEMFC) emerge as a pivotal green energy technology, facilitating electricity and water generation. The opt [...] 1662 12159 |
Emerging Trends in Engineering Polymers: A Paradigm Shift in Material EngineeringAbstract Emerging Trends in Engineering Polymers signify a pivotal transformation in material engineering, marking a departure from traditional materials towards innovative, multifunctional, and sustainable polymers. This review delineates the forefront of advancements in polymer materials, inclu [...] 4440 41003 |
Revolutionizing Infrastructure Development: Exploring Cutting-Edge Advances in Civil Engineering Materialsby
Michael Toryila Tiza
,
Samson Imoni
,
Ebenezer Ogırıma Akande
,
Onyebuchi Mogbo
,
Victoria Hassana Jiya
and
Collins Onuzulike
Abstract This study addresses the evolving challenges in infrastructure development by exploring recent advancements in civil engineering materials. The problem lies in the limitations of traditional materials such as concrete and steel, which, wh [...] 2129 12826 |
Nanomedicine: Pioneering a New Frontier in Neuro-OphthalmologyAbstract Nanotechnology is one of the most promising fields of study, and it represents a pioneering leap in science and technology by the precise control over materials at the atomic and molecular level. This transformation affects numerous aspects of modern human life, including medicine, healthcare, elect [...] 1639 7819 |
Obtaining of WC–Co- and WC–TiC–Co-Based Ultradispersive Alloys Modified with B4C–TiB2 QuasieuteticAbstract Tungsten carbide WC-based materials characterized by high hardness and wear resistance have long been widely used in manufacturing cutting and mining tools. They are alloyed or modified with different ceramic phases to improve operational characteristics further. There are o [...] 1699 12478 |
Influence of Thermal Environment Conditions on Mechanical Properties of MEX Printed 17-4 PH Stainless Steelby
Bruno Schubert
and
David Hochmann
Abstract This study investigates the influence of thermal environmental conditions during printing and their effects on the mechanical properties of material extrusion (MEX) 3D-printed 17-4 PH stainless steel. Various ambient temperatures and cooling behaviors were used during the printing process of the ten [...] 887 6130 |
Sustainable Concrete with Zero Carbon Footprintby
Ahmed Alawais
and
Roger P West
Abstract This paper describes a method to use solely recycled and by-product materials as constituents to form concrete that can be used in buildings structural applications. As concrete is one of the most important materials in human civilization, where it is used widely in construction, cement and aggregat [...] 1238 9979 |
Construction and Evaluation of a Modular Anthropomorphic Phantom of the Skull with an Exchangeable Specimen Jar to Optimize the Radiological Examination of Temporal Bone Pathologyby
Malin Vestin Fredriksson
,
Love Kull
,
Anton Rönnblom
,
Lennart Flygare
,
Diana Berggren
and
Krister Tano
Abstract To develop a modular anthropomorphic phantom to evaluate the performance of radiological techniques for detecting pathologies in the temporal bone region. A phantom was constructed using a human skull, temporal bone specimen, and 3D-printed contour of a human skull. The human skull was embedded in t [...] 1034 5183 |
Impact of Pernicious Chemicals on Geopolymer and Alkali-Activated Composites Incorporated with Different Fiber Types: A ReviewAbstract Over the past decade, developing geopolymer mixes to replace ordinary Portland Cement (OPC) composites has yielded positive results, leading to extensive research. The incorporation of fibers in geopolymers, besides impacting the mechanical properties, has also significantly impacted dur [...] 1209 12210 |
Spark Plasma Sintering of Cu-Ti-Ni Ternary Alloy: Microstructural, Thermal and Electrical Propertiesby
Amos O. Oyatogun
,
Emmanuel Ajenifuja
,
Abimbola P. Popoola
,
Olawale Popoola
,
Fatai O. Aramide
and
Grace M. Oyatogun
Abstract High strength and good conductivity are both critical parameters for copper-based alloys for electrical and other technological applications. This study is aimed to produce copper alloys and metal matrix composites (MMCs) with enhanced physical properties. Cu-Ti-Ni ternary alloys and MMCs samples we [...] 1046 6094 |
Review on Some Important Research Progresses in Biodegradable Plastics/Polymersby
Zhong Hu
and
Ruanbao Zhou
Abstract Biodegradable plastics/polymers may serve as a promising solution to the global problem of plastic waste accumulation in oceans and soil and may significantly reduce carbon emissions from the manufacturing process, since the materials used to make biodegradable polymers are carbon-based and emitted [...] 2087 26550 |
Development of the Stochastic Interpretation of Quantum Mechanics by E. Nelson. Derivation of the Schrödinger-Euler-Poisson EquationsAbstract The article aims to develop the stochastic interpretation of quantum mechanics by E. Nelson based on balancing the intra-systemic contradiction (i.e., antisymmetry) between “order” and “chaos”. For the set task, it is proposed to combine two mutually opposite system-forming principles: “ [...] 862 13358 |
The Effect of Rake Angle and Cutting Edge Radius on the Orthogonal Cutting Process of Ti6Al4V AlloyAbstract This paper investigates the effect of rake angle, α, cutting edge radius, r, and feed rate, f, on the cutting force and cutting zone temperature during orthogonal dry cutting of Ti6Al4V. A numerical model representative of the 2D orthogonal cutting process is developed using ABAQUS/Expli [...] 1381 7887 |
Spin Entanglement – A Unifying Principle for Superconductors and Molecular Bondingby
Paul O'Hara
Abstract The spin-statistics theorem is generalized to include quantum entanglement. Specifically, within the context of spin entanglement, we prove that isotropically spin-correlated (ISC) states must occur in pairs. This pairing process can be composed of parallel or anti-parallel states. Consequently, the [...] 923 7110 |
Enhancing Thermal, Viscoelastic, and Mechanical Properties of Silicone Rubber Matrix through Reinforcements for Use as a Medical ImplantAbstract The use of silicone rubber as an implant is limited due to its weak properties. In this study, the impact of various reinforcements, such as TiO2 or SiO2 nanoparticles, carbon, or polypropylene fiber micro reinforcements, on the mechanical, thermal, and [...] 1916 13347 |
Whisker Bond: From Findings to Concept in Refractoriesby
Zongqi Guo
and
Wenxu Wei
Abstract Ceramic bonds are conventionally formed during the burning of refractory bricks and by using pre-fabricated blocks or monolithic lining, which is characterized as the coalescence of the particles by liquid sintering. However, the whisker bond was discove [...] 1152 5817 |
Review on the Development of Titanium Diboride CeramicsAbstract Titanium diboride (TiB2) materials have garnered significant attention due to their remarkable comprehensive properties. They offer potential applications in high-temperature structural materials, cutting tools, armor, electrodes for metal smelting, and wear-resistant parts. H [...] 3527 22191 |
A Review on Silk Fibers and Their Medical ApplicationsAbstract This mini-compilation study included the chemical structure, mechanical, thermal, and dimensional properties of silk fiber, its production process, pre-treatment, and biomedical applications from various experimental studies, which are compiled and summarized. The silk fiber should have a degumming [...] 2892 15159 |
Capillary Suction Properties of Mortar Made with Recycled Plastic Aggregates Elaborated from Waste Electrical and Electronic EquipmentAbstract It is possible to revalue the plastic fraction from WEEE using it as a recycled aggregate (RA) in cement mortars. However, this feasibility depends on elaborating a granular material via a core-shell strategy to stabilize the potential contaminants. The core is a plastic particle, and the shell is a [...] 889 5035 |
Self-Healing Concrete Techniques and Technologies and Applicationsby
John Hanna
Abstract The main weakest point of concrete is its exposure to cracks, and concrete structure repair is expensive, especially for infrastructure maintenance, which is difficult to access. The ability of self-healing concrete (SHC) to successfully heal fractures without the assistance of humans has received m [...] 6081 68703 |
Do Magnetic Monopoles Exist?Abstract In this paper, we continue our previous work by discussing the consequences of curvature in spacetime caused by the presence of mass and the implications of this. We address the question raised by Dirac regarding the impact of a magnetic monopole on the quantum world. We discuss quantiza [...] 1338 11080 |
Elementary Collective Effects in Systems Containing Small Fermion-NumbersAbstract Collective effects are a typical nuclear feature that refers to the behavior of a group of N fermions (protons and neutrons) within the atomic nucleus. Our interest lies in light nuclei only. Thus, we consider here, using the Lipkin model, a small-N fermion system at low-temperature T and discover - [...] 1212 5356 |
Modified Organized Systems by Incorporation of Carbon Allotropes and Derivatives for Electron Shuttle, ET, FRET, MEF, and Quantum Biology CouplingAbstract This communication was brief to show how high conjugated carbon-based structures and carbon allotropes could participate as electron shuttles, semiconductors, quantum emitters, and Optoelectronic processors within confined nanostructured organized systems. In particular, it was focused on nanoassemb [...] 1045 6423 |
An Overview of Treatments for Ultraviolet Quenching Substances (UVQS) and Per- and Polyfluoroalkyl Substances (PFAS) Removal from Landfill LeachateAbstract Organics found in landfill leachate (humic acids, fulvic acids, and hydrophilic fraction) have a solid ability to absorb ultraviolet (UV) radiation, which negatively affects UV disinfection; leachate ultraviolet quenching substances (UVQS) can, therefore, have a significant [...] 1876 10368 |
Acknowledgment to Reviewers of Recent Progress in Materials in 2023Abstract The editors of Recent Progress in Materials would like to express their sincere gratitude to the following reviewers for assessing manuscripts in 2023. We greatly appreciate the contribution of expert reviewers, which is crucial to the journal's editorial process. We aim to reco [...] 828 4306 |
Quantum Semiconductors Based on Carbon Materials for Nanophotonics and Photonics Applications by Electron Shuttle and Near Field PhenomenaAbstract This review intended to resume key Research reports and publications that open many themes and topics related to Carbon-based semiconductors and Quantum emitters. The Design and synthesis of highly pure materials such as Graphene, Carbon Nanotubes, fullerenes, and other Carbon-based allotropes were [...] 1102 7963 |
Potential Applications of NanomedicineAbstract EditorialPotential Applications of NanomedicineHossein Hosseinkhani *Innovation Center for Advanced Technology, Matrix HT, Inc., New York, NY 10019, USA; E-Mail: hh@matrix- [...] 1148 5608 |
TOP