Building Blocks for an Energy Transition
Abstract
1421 10918
Building Blocks for an Energy TransitionAbstract
The present need for an energy transition in the wake of a global climate catastrophe led to the “EU green deal” which requires a transition of the energy system in all countries. This study aimis survey aims to identify strategies within such an energy transition based on global trend analyses and reports on available technologies for implementation. Based on a literature analysis of over 300 pieces (of feasibility studies and technology implementation reports with a focus on Central Europe) and a statistical anal [...] 1421 10918 |
Assessment of Water Balance Dynamics and Resource Stress in the Gaza Strip, Palestineby
Abstract
Water scarcity is one of the most pressing global challenges, particularly in arid and semi-arid regions. In this context, the Gaza Strip, where groundwater is the only available natural water resource, faces severe water stress due to overexploitation and drought conditions. This study aimed to review the recent water budget for the Gaza Strip by collecting data for the years (2021-2022) which was analyzed, discussed, and compared with other studies. The results showed a sharp deterioration in the Gaza Strip in te [...] 1421 8241 |
Historical Evolution and Scenarios Up to 2050 of Heating Energy Consumption and CO2 Emissions of Residential Buildings in ViennaAbstract
Today, the building sector poses a major problem concerning fossil fuel energy consumption and the corresponding emissions of local pollutants and global greenhouse gases (GHG). In addition, an increasing number of people are living in urban areas, and it is becoming challenging to provide the necessary living space and energy for heating in fast-growing cities. Currently, urban areas host approximately 50 % of the global population and generate 70 % of GHG. The core objective of this study is to analyze the histor [...] 1417 9764 |
Numerical Study to Understand the Conservation of Hydrogen Through a Dynamic Fuel Supply System in Proton Exchange Membrane Fuel Cells (PEMFCs)Abstract
Reducing and conserving fuel usage is pivotal for any engineering system for the development of a sustainable energy solution. Proton exchange membrane fuel cells (PEMFCs) are one of the promising renewable energy systems that consume hydrogen as their source of fuel to generate electricity. This paper investigate the necessity of the constant supply of fuel (hydrogen) in the PEMFC system to ensure stable operation. We propose that a dynamic supply of fuel could help achieve similar performance and reduce the amoun [...] 1414 9251 |
Advances in Wind Farm Layout Optimization: Wind Direction Robustness and Wake Induced Asymmetric Thrust LoadAbstract
In this study, we address the wind farm layout optimization (WFLO) problem and tackle the issue of optimal turbine placement by incorporating additional aspects of an economically driven target function. Firstly, we have analyzed the effect of wind direction on a given turbine arrangement. Based on the direction-dependent wake pattern, practitioners sometimes shut down certain turbines on their farms. Our method computes which turbines should be shut down in which wake situation. On this basis, we have developed a [...] 1413 9481 |
The Effect of the Addition of Titanium Dioxide on Silicone Self-Adhesive TapesAbstract
The investigation aimed to delve into the intricate relationship between the presence of titanium dioxide and the resulting alterations in the adhesive's behavior under different conditions. The focus extended beyond mere observation to understand how these additives interact with the adhesive matrix, potentially imparting beneficial attributes. Notably, the study delved into the optimization of thermal stability, the extension of the adhesive's functional lifespan, and the mitigation of shrinkage tendencies. This [...] 1405 8324 |
A Robust Second-Order Conic Programming Model with Effective Budget of Uncertainty in the Optimal Power Flow ProblemAbstract
Integrating large-scale wind energy in modern power systems necessitates high-efficiency mathematical models to address classical assumptions in power systems. In particular, two main assumptions for wind energy integration in power systems have not been adequately studied. First, nonlinear AC power flow equations have been linearized in most of the literature. Such simplifications can lead to inaccurate power flow calculations and result in technical issues. Second, wind power uncertainties are inevitable and have [...] 1404 7971 |
Quantification and Comparative Analysis of Environmental Factors to Large-Scale Solar Plant’s Energy Performance via Regression and Linear Correlation Modelsby
Abstract
Performance degradation, including system deterioration, corrosion, and energy loss in solar PV systems, can be caused by environmental conditions such as high humidity, frequent rainfall, and temperature swings in tropical nations. Over the years, photovoltaic energy has been successfully developed to have low production costs and high efficiency. It has been the main reason that solar energy is one of the fastest-growing renewable energies in the world, with a generation of 821 TWh of electricity since 2021, repr [...] 1390 11209 |
Non-Isothermal Compressible Flow Model for Analyzing the Effect of High CO2 Inlet Flow Rate on Particle Size in a Supercritical Antisolvent Processby
Abstract
In this work with CFD simulations, the evaluation of the supercritical anti-solvent (SAS) process for producing nanoparticles from an expanded solution of ethanol/solute in carbon dioxide is reported. The influence of the solution and antisolvent flow rates on mean particle size, the flow dynamic, and the supercritical mixture's jet velocity must be well established in the literature and analyzed. The high flow rate of the anti-solvent resulted in increased mean particle sizes for all studied cases. At the lowe [...] 1375 9524 |
Environmental Impacts of Different Electricity Production Scenarios in FranceAbstract
This study focuses on the environmental impacts of the electricity production scenarios proposed for France for 2060 by the French electricity network manager, RTE. They consider an increasing electricity consumption and a production without fossil fuels, essentially based on wind, photovoltaic, hydraulic, and, for some, nuclear power. The total power to install is significantly higher than the current one; it is higher in the scenarios that rely more on photovoltaic and less on nuclear. Renewable energies require [...] 1364 11756 |
Nonlinear Optimal Control for a PMLSG-VSC Wave Energy Conversion Unitby
Abstract
This article aims to treat the nonlinear control problem for the complex dynamics of a wave energy unit (WEC) that consists of a Permanent Magnet Linear Synchronous Generator (PMLSG) and a Voltage Source Converter (VSC). The article has developed a globally stable nonlinear optimal control method for this wave power generation unit. The new method avoids complicated state-space model transformations and minimizes the energy dispersion by the control loop. A novel nonlinear optimal control method is proposed for the [...] 1360 7223 |
Experimental Study and Kinetic Modeling of Agro-Industrial Wastes for Conversion to Fuel Gas via the Boudouard ReactionAbstract
Independent parallel reactions (IPR) and distributed activation energy (DAEM) kinetic models were developed and compared for the combined pyrolysis-gasification of two agro-industrial waste materials. The aim was to recycle greenhouse gas carbon dioxide for mitigating emissions, to evaluate the thermal behavior, reactivity, conversion and product composition in terms of structural/chemical characteristics of the fuels, and to provide accurate kinetic parameters useful in the scaling-up of the process. The experimen [...] 1353 5756 |
Nonlinear Optimal Control for Six-Phase Induction Generator-Based Renewable Energy SystemsAbstract
The article aims at optimizing six-phase induction generator-based renewable energy systems (6-phase IGs or dual star induction generators) through a novel nonlinear optimal control method. Six-phase induction generators appear to be advantageous compared to three-phase synchronous or asynchronous power generators, in terms of fault tolerance and improved power generation rates. The dynamic model of the six-phase induction generator is first written in a nonlinear and multivariable state-space form. It is proven th [...] 1337 8832 |
Incentivizing Alternative Fuel Vehicle Transactions: Analysis of Cash-for-Clunkers Transactions for New Alternative Fuel VehiclesAbstract
Monetary incentives to accelerate the transition of private vehicle fleets to zero emissions promote sustainability in the transportation sector. Clean Cars for America to incentivize transactions for new battery power vehicles is a program in furtherance of sustainable transportation goals in the United States. Unfortunately, data on transactions for new alternative fuel vehicles (AFVs) are scarce so empirical research to explore the costs and/or the benefits of such programs is also scarce. Analysis of transactio [...] 1325 7503 |
Design and Management of Renewable Energy Systems for Isolated Communities with No Grid ConnectionAbstract
The growing demand for energy and the need to reduce dependence on non-renewable sources have driven the research and application of sustainable technologies. In this context, an integrated solution that combines distributed energy generation from renewable sources, such as wind and hydro, with efficient management of household energy consumption is proposed. This study focuses on the hybrid renewable energy system simulation analysis designed to meet the demand of an off-grid household in a self-consumption mode. [...] 1315 6788 |
Enhancing the Wettability of Polyetheretherketone (Peek) Membrane with Ozone for Improving Fuel Cell Performanceby
Abstract
Ozone was reacted with the aromatic membrane polyetheretherketone (PEEK) to form oxidized functional groups on the surface to enhance the attraction and transport of protons in fuel cells. Ozonation of unsaturated C-C sp2 bonds in PEEK formed a primary ozonide which dissociated to primarily produce O=C-O/O=C-OH moieties, and the root mean squared roughness factor (Rq) decreased from 7.4 nm, for the untreated sample, down to 3.1 nm. The oxidation of the surface and decrease in surface roughness made the surface incr [...] 1315 7876 |
Local Authority Waste Management Strategies, the Circular Economy and the Generation of Energy from Waste in Englandby
Abstract
The purpose of this article is to examine the approach to waste management of local authorities in England, to investigate their strategic objectives, and to ascertain to what extent sustainability and circular economy practices are in evidence in this context. A qualitative, inductive research method is used, based on an examination of secondary documentation in three local authorities in England in Birmingham, Bristol and Newcastle upon Tyne. The findings reveal considerable common ground within the three authori [...] 1312 7964 |
Stability Improvement of Multimachine System Using Back-To-Back ConvertersAbstract
As the penetration level of inverter-based generators continues to increase, it becomes crucial to reduce power oscillations between inverters and synchronous generators (SG) to improve system stability. This paper uses a multimachine system as the research platform and proposes a grid separation method employing a multi-terminal back-to-back converter. The converter is designed to be placed at the point of common coupling (PCC) in the original multimachine system and can divide the original grid into multiple micr [...] 1307 5600 |
Study and Characterization of a Spherical Solar Collector. I. Efficiency and Thermal Losses CoefficientAbstract
This paper studies and characterizes a solar collector with spherical geometry to produce hot water for sanitary and domestic applications and other facilities. The new geometry enlarges the solar collector surface and allows full sun tracking during the day without needing a solar tracking system. Although this geometry has been in use for some time, its market penetration is low due to the lack of perfect knowledge of solar collector behavior and the benefits compared with conventional solar collectors. The studi [...] 1305 7825 |
A Dual-PRF Scan Mode and Adaptive Doppler-Velocity Dealiasing to Increase Radar Clear-Air Velocity Data Coverage and UsabilityAbstract
By using long pulses with extended dwelling time, lowered pulse repetition frequency (PRF) and reduced Nyquist velocity, the radar measurement capability can be enhanced to increase clear-air Doppler velocity data coverage (which is beneficial for radar wind analysis and data assimilation and motivated our previous study). This potential capability is further explored (beyond our previous study) by not only modifying the existing operational clear-air scan mode with a lowered PRF and reduced the Nyquist velocity (t [...] 1300 9177 |
Stability Analysis of Autonomous Microgrid Operated at Constant-Frequency with the Consideration of Reactive Power Balanceby
Abstract
Large-scale autonomous microgrids have potential application values as they can increase renewable energy penetration level without compromising the stability of the existing large power systems. Before their widespread implementation, critical issues like stability analysis etc need to be solved. This paper analyses the stability in an autonomous microgrid operated at constant frequency with the consideration of reactive power balance. Difference equations of reactive power for the grid-forming generator are const [...] 1298 6753 |
Controller Evaluation for Solar-Latent Thermal Energy Applicationsby
Abstract
In this study, the performance of a self-sufficient controller used for a solar-latent heat domestic hot water (DHW) production unit under real-world operating conditions was analyzed. The unit consists of a flat-plate solar collector and a latent heat storage tank. The controller is powered by a small solar panel and governs the charging and discharging of the system, ensuring maximum solar energy absorption, desired hot water temperature, and constant monitoring of the heat-storage tank’s capacity. The system is [...] 1281 7892 |
Nanostructure-Based Solid-State Energy Storage through Hydrogen Trapping in Batteries Using Materials Modelling TechniqueAbstract
A comprehensive investigation on hydrogen grabbing by SiO-GeO was carried out, including DFT computations at the CAM-B3LYP-D3/6-311+G (d,p) level of theory. The data shows that if silicon elements are replaced by germanium, the H-grabbing energy will be ameliorated. Electromagnetic and thermodynamic properties of SiO, GeO, and SiO-GeO nanoclusters have been evaluated. The hypothesis of the hydrogen adsorption phenomenon was confirmed by density distributions of PDOS and LOL for hydrated nanoclusters of H-SiO, H-GeO [...] 1269 5348 |
Fixed-Switching Frequency Finite-State Model Predictive Thrust and Primary Flux Linkage Control for LIMAbstract
The special design of linear induction machines (LIMs) leads to adverse effects caused by the longitudinal and end effects. These effects make the thrust control of the LIMs most attractive because its value decreases sharply with the speed increase. Thus, finite-state model predictive control (FS-MPC) is developed to increase the performance of the LIMs. However, the variable switching frequency is the main drawback of this control. Consequently, the main objectives of this paper are to propose FS-MPC with a const [...] 1267 8157 |
Modeling of Autonomous Microgrid Operated at Medium-Voltage Level and at Constant Frequency and Study of Its Voltage Profileby
Abstract
To increase power level in an autonomous microgrid, higher voltage is necessary. In this paper, detailed Matlab/Simulink modeling of a microgrid operated at medium-voltage level and at constant frequency has been conducted. Modified boost converter and medium-frequency transformer isolated DC/DC converter are adopted for both solar energy and wind energy harnessing in order for them to be connected with the microgrid. This paper further adopted a differential evolution (DE)-based method to carry out load flow analy [...] 1250 7450 |
TOP