by Agnes C. Nkele  , Imosobomeh L. Ikhioya  , Chinedu P. Chime  and Fabian I. Ezema

Received: 29 May 2023;  Published: 18 July 2023;  doi: 10.21926/jept.2303024

In recent times, renewable energy resources have been greatly researched because of the increasing concern to minimize global warming and meet energy demands. Energy storage systems have become useful tools for sustainability and meeting energy needs. Solar energy has proven in recent times to be the primary and most prevalent option due to its environmental friendliness, availability, and minimal pollution. Effective utilization of available energy resources has led to developing new alternative energy devices lik [...]

by Xiaofei Qin  , Yongren Feng  , Lejun Wu  , Zhongjian Tan  , Yanmin Zhou  and Wilson Chin

Received: 12 April 2023;  Published: 10 July 2023;  doi: 10.21926/jept.2303023

In conventional wireline and LWD/MWD formation testing, downhole predictions for rock and fluid properties are based on simplified Darcy flow models, but only for mathematical expediency. These require initially constant pressures that are uniform throughout the reservoir. This limitation precludes common applications in overbalanced drilling, so that supercharge or near-well invasion effects - associated with rapidly decreasing pressures at the sandface where pressures are measured - are completely ignored. Such 1 [...]

by Carlos Armenta-Déu

Received: 21 April 2023;  Published: 04 July 2023;  doi: 10.21926/jept.2303022

This paper studies and characterizes a solar collector with spherical geometry to produce hot water for sanitary and domestic applications and other facilities. The new geometry enlarges the solar collector surface and allows full sun tracking during the day without needing a solar tracking system. Although this geometry has been in use for some time, its market penetration is low due to the lack of perfect knowledge of solar collector behavior and the benefits compared with conventional solar collectors. The studi [...]

by Journal of Energy and Power Technology Office

Received: 25 June 2023;  Published: 28 June 2023;  doi: 10.21926/jept.2302021

by Alpha Chukwumela Ajie  , Mohammed Moore Ojapah  and Endurance Ogheneruona Diemuodeke

Received: 07 February 2023;  Published: 20 June 2023;  doi: 10.21926/jept.2302020

With their higher sustainability index, biofuels, environmentally-friendly and renewable nature is a viable alternative energy source in the transportation sector. This study presents the effect of waste cooking oil (WCO) biodiesel on performance, combustion, and emission from a compression ignition engine. The biodiesel was blended with diesel in varying proportions of 5% biodiesel and 95% diesel (designated as B5), 10% biodiesel in diesel (B10), 15% biodiesel in diesel (B15), 20% biodiesel in diesel (B20), 50% bi [...]

by C. Shah Kabir

Received: 28 March 2023;  Published: 12 June 2023;  doi: 10.21926/jept.2302019

Investigations on two-phase gas/liquid flow in pipes have been under study for nearly six decades. These studies have significantly assisted in managing fluid flow in the wellbore and surface networks, leading to the separation of phases and transmission of oil and gas into the market. This study summarizes some of the main lessons learned in flow through wellbores. Besides understanding some of the fundamental principles, we focused on the practical items of interest: Conventional production scenarios for oil and [...]

by Gerasimos Rigatos  , Masoud Abbaszadeh  , Bilal Sari  and Pierluigi Siano

Received: 07 December 2022;  Published: 11 May 2023;  doi: 10.21926/jept.2302018

The article aims at optimizing six-phase induction generator-based renewable energy systems (6-phase IGs or dual star induction generators) through a novel nonlinear optimal control method. Six-phase induction generators appear to be advantageous compared to three-phase synchronous or asynchronous power generators, in terms of fault tolerance and improved power generation rates. The dynamic model of the six-phase induction generator is first written in a nonlinear and multivariable state-space form. It is proven th [...]

by Mahmoud F. Elmorshedy  , Abualkasim Bakeer  and Dhafer Almakhles

Received: 14 February 2023;  Published: 09 May 2023;  doi: 10.21926/jept.2302017

The special design of linear induction machines (LIMs) leads to adverse effects caused by the longitudinal and end effects. These effects make the thrust control of the LIMs most attractive because its value decreases sharply with the speed increase. Thus, finite-state model predictive control (FS-MPC) is developed to increase the performance of the LIMs. However, the variable switching frequency is the main drawback of this control. Consequently, the main objectives of this paper are to propose FS-MPC with a const [...]

by Regiani Aparecida de Almeida  , Ricardo Vicente de Paula Rezende  , Flavia Aparecida Reitz Cardoso  and Lucio Cardozo Filho

Received: 17 December 2022;  Published: 18 April 2023;  doi: 10.21926/jept.2302016

In this work with CFD simulations, the evaluation of the supercritical anti-solvent (SAS) process for producing nanoparticles from an expanded solution of ethanol/solute in carbon dioxide is reported. The influence of the solution and antisolvent flow rates on mean particle size, the flow dynamic, and the supercritical mixture's jet velocity must be well established in the literature and analyzed. The high flow rate of the anti-solvent resulted in increased mean particle sizes for all studied cases. At the lowe [...]

by Aniebiet D. Udoh  , Ogheneruona E. Diemuodeke  , Mohammed M. Ojapah  , Fidelis I. Abam  and Joseph C. Ofodu

Received: 29 December 2022;  Published: 13 April 2023;  doi: 10.21926/jept.2302015

The quest to decarbonize the energy space to avert the negative climate change consequences calls for using low/zero-carbon energy conversion technologies in the energy generation space. The Organic Rankine Cycle is a low/zero-carbon energy conversion technology for recovering waste heat from low to medium-temperature heat sources and for biomass conversion. Therefore, this paper presents the thermodynamic optimization, with an artificial bee colony algorithm, of different ORC configurations, including simple organ [...]