by Dimitrios N. Konispoliatis

Received: 09 December 2023;  Published: 07 February 2024;  doi: 10.21926/jept.2401005

The main challenge in designing offshore renewable energy structures is to ensure their structural integrity on a life cycle basis while operating in harsh environments and, in parallel, being financially competitive and environmentally friendly concerning other types of energy systems. The Oscillating Water Column (OWC) converters are among the first energy converters to be developed and deployed into the sea due to their relative simplicity of operation and relatively small number of moving parts. This review pro [...]

by Ashraf Zaghwan  , Yousef Amer  , Mahmoud Efatmaneshnik  and Nagi Abdussamie

Received: 24 July 2023;  Published: 06 February 2024;  doi: 10.21926/jept.2401004

The economic impact of energy loss stemming from end-user electricity consumption is a significant concern, with historical trends revealing escalating costs. Effectively managing both peak and off-peak demands remains a formidable challenge due to the unpredictable nature of consumer behaviors, leading to energy wastage. This study delves into the nexus of demand uncertainty, financial repercussions, and potential strategies to mitigate energy losses in the evolving landscape of electricity consumption.that causes [...]

by Mohammad Forhad  , Mehedi Hasan Shakil  , Md.Rashidul Islam  , Muhammed Y. Worku  and Md Shafiullah

Received: 20 June 2023;  Published: 30 January 2024;  doi: 10.21926/jept.2401003

The prolonged presence of low-frequency oscillation (LFO) in power system networks (PSN) poses a significant threat to their stability. Hence, engineers and researchers have continuously developed effective strategies to mitigate the issue and enhance the stability of the PSN. This article proposes a new approach using the African Vultures Optimization Algorithm (AVOA) to design robust Power System Stabilizers (PSS) and enhance the LFO damping in multi-machine networks. The damping ratio-based objective function mi [...]

by Vincent Anayochukwu Ani

Received: 06 August 2023;  Published: 24 January 2024;  doi: 10.21926/jept.2401002

Energy is a prerequisite to running health facilities and is, therefore, key to the success of the service. Karshi primary healthcare centre (PHC) facility is confronted with an unreliable power supply that leads to a high cost of generating power from diesel to operate its equipment. This facility needs a sustainable and reliable electricity supply and therefore a change in their energy system to enable it improve its quality of healthcare delivery services. A solar energy-based electricity generation system that [...]

by Journal of Energy and Power Technology Editorial Office

Received: 04 January 2024;  Published: 05 January 2024;  doi: 10.21926/jept.2401001

The editors of Journal of Energy and Power Technology would like to express their sincere gratitude to the following reviewers for assessing manuscripts in 2023. We greatly appreciate the contribution of expert reviewers, which is crucial to the journal's editorial process. We aim to recognize reviewer contributions through several mechanisms, of which the annual publication of reviewer names is one. Reviewers can download a certificate of recognition directly from our submission system. Additionally, reviewers can [...]

by Daming Zhang  and Xiuhui Tang

Received: 01 September 2023;  Published: 29 November 2023;  doi: 10.21926/jept.2304039

Large-scale autonomous microgrids have potential application values as they can increase renewable energy penetration level without compromising the stability of the existing large power systems. Before their widespread implementation, critical issues like stability analysis etc need to be solved. This paper analyses the stability in an autonomous microgrid operated at constant frequency with the consideration of reactive power balance. Difference equations of reactive power for the grid-forming generator are const [...]

by Minggao Zhou  , Yongren Feng  , Yongzeng Xue  , Yanmin Zhou  , Yongchao Chen  and Wilson C. Chin

Received: 12 April 2023;  Published: 27 November 2023;  doi: 10.21926/jept.2304038

An early formation tester operating a “sink probe” that extracts fluids from the borehole, also measures pressures at its location; pressures are additionally collected at two passive sensors, one situated 180 deg away and the second about meter axially. These positions are not conducive to accurate permeability predictions, since pressure transient signals used for inverse analysis attenuate very rapidly. Closer probe spacings offer formation evaluation advantages at low mobilities because Darcy pressure dissipati [...]

by Brian D. Barkdoll

Received: 26 May 2023;  Published: 21 November 2023;  doi: 10.21926/jept.2304037

Global climate change has necessitated the reduction of GHG emissions. Water distribution system (WDS) pumping adds to these emissions and, therefore, should be reduced. Under electricity hourly cost tariffs, utilities are incentivized to pump during the nighttime hours. This can have a deleterious effect, however, on GHG emissions. To quantify this effect, a modeling study of twelve real WDSs was performed with an electricity tariff. The systems all had the typical tank-level-based pump controls but also time-base [...]

by Peter Newman  and Marie Verschuer

Received: 27 February 2023;  Published: 17 November 2023;  doi: 10.21926/jept.2304036

The transition to net zero cities is a pivotal challenge in the face of climate change. This research introduces a novel methodology termed "Net Zero Corridors," which emphasizes a bottom-up approach to decarbonize urban power and transport systems. By focusing on urban corridors, this method integrates distributed power systems with urban transport, offering a localized solution to the broader challenge of urban decarbonization. Drawing from urban fabric theory and urban metabolism data, the study provides insight [...]

by Abdel Zaro  , Spencer Jones  and Ethan Languri

Received: 31 August 2023;  Published: 16 November 2023;  doi: 10.21926/jept.2304035

In this paper, an efficient industrial wastewater and leachate evaporation method is proposed and tested experimentally. The goal of this study is to investigate whether the addition of a carbon foam (CF) porous layer can lead to energy savings by evaporating more water mass per unit of energy input. The standard boiling evaporator layout was redesigned by placing the heating element in the upper region of the tank and CF underneath the heat source. The CF purposed to localize the energy in an area by the water' [...]