by Peng Li  , Chi-Yao Chang  and Amsini Sadiki

Received: 02 April 2021;  Published: 28 June 2021;  doi: 10.21926/jept.2102026

A numerical model describing the ballistic behavior of a commercially used initiator is presented in this article. This model was built on the principle of conservation of mass and energy in the multi-phase framework incorporated with multi-loaded conditions. After obtaining the information about the grain size distribution in each composite, a fixing factor was proposed based on the surface area ratio of the composites. Thus, the solid propellant burning process based on distributed grain size was described, and t [...]

by Nobuyuki Imanishi  , Tao Zhang  , Daishuke Mori  , Sou Taminato  , Yashuo Takeda  and osamu yamamoto

Received: 21 February 2021;  Published: 08 May 2021;  doi: 10.21926/jept.2102019

Because lithium metal exhibits high specific capacity and low potential, it is the best candidate for fabricating anodes for batteries. Rechargeable batteries fabricated using lithium anode exhibit high capacity and high potential cathode; these can be potentially used to fabricate high energy density batteries (>500 Wh kg-1) that can be used for the development of next-generation electric vehicles. However, the formation and growth of lithium dendrites and the low coulombic efficiency recorded during lithiu [...]

by John Glasson  , Bridget Durning  and Kellie Welch

Received: 06 July 2022;  Published: 16 November 2022;  doi: 10.21926/jept.2204037

The article examines the nature of impacts of the rapidly growing Offshore Wind Farm (OWF) industry on tourism and recreation in coastal communities, especially in the UK. The multi-methods research approach includes reviews of literature, content of OWF Environmental Statements (ESs) for predicted impacts, recent practice for actual impacts, and the use of mitigation and enhancement measures. Findings from literature indicate that the overall impact on tourism appears relatively benign, and sometimes positive. The [...]

by Manuel Legree  , Jocelyn Sabatier  , Fabrice Mauvy  , Abdel Salam Awad  , Matthieu Faessel  , Frederic Bos  and Jean-Louis Bobet

Received: 04 March 2020;  Published: 28 April 2020;  doi: 10.21926/jept.2002004

This paper focuses on hydrogen production for green mobility applications (other applications are currently under investigation). Firstly, a brief state of the art of hydrogen generation by hydrolysis with magnesium is shown. The hydrolysis performance of Magnesium powder ball–milled along with different additives (graphite and transition metals TM = Ni, Fe, and Al) is taken for comparison. The best performance was observed with Mg–10 wt.% g mixtures (95% of theoretical hydrogen generation yield in about 3 min). An [...]

by Khaliq Ahmed  , Periasamy Vijay  , Moses Tadé  , Amirpiran Amiri  , Zongping Shao  and Karl Föger

Received: 31 July 2020;  Published: 18 January 2021;  doi: 10.21926/jept.2101004

This report is an account of research and development activities undertaken by the Centre for Process Systems Computations, Department of Chemical Engineering at Curtin University, Western Australia in the area of solid oxide fuel cells. The focus of work of the group included 1)effect of cell macrostructure and microstructure on electrochemical performance with a view to optimise both macro- and micro-structure 2) electrochemistry modeling for simulating electrochemical performance 3) internal reforming aspects im [...]

by Xiuhui Tang  , Daming Zhang  and Hua Chai

Received: 19 May 2021;  Published: 08 July 2021;  doi: 10.21926/jept.2103032

In AC microgrid systems, technical issues resulting from the power control effect are the power control method efficiency and the filter resonance since voltage-frequency interference and filtering resonance may cause significant control input reduction and oscillation. A simple and robust solution is to regulate active power flow by adding an optimal passive damping resistor. The optimal LCL filter parameterization process in this paper provides an innovative approach to obtain the optimal quality factor and the o [...]

by Foad Haeri  , Deepak Tapriyal  , Christopher Matranga  , Dustin Crandall  and Angela Goodman

Received: 05 September 2021;  Published: 05 November 2021;  doi: 10.21926/jept.2104046

Contact angles were measured for CO2-brine interactions on 20 different rocks that represent the properties of various CO2 storage depositional environments to characterize the wettability during geologic carbon storage. Three different CO2 phases (gaseous, liquid, and supercritical) were considered to investigate the effect of pressure and temperature. Bubbles were studied in two groups of larger and smaller than 500 μm, the latter being more relevant to pore scale. Variation was observed among contact angle measu [...]

by Cenk Temizel  , Hakki Aydin  , F. Bahar Hosgor  , Cengiz Yegin  and C. Shah Kabir

Received: 25 September 2022;  Published: 28 January 2023;  doi: 10.21926/jept.2301004

In recent years, the oil and gas sector has been moving towards green production methods to achieve net-zero emission goals. Governments and corporations have started large-scale initiatives to deploy advanced technologies to reduce carbon footprints and prevent global warming. Herein, we have explored the emerging techniques and methods used in reducing the effects of gas emissions in the oil and gas industry. The transition process from hydrocarbons to renewable energy resources, including solar thermal applicati [...]

by Ryosuke Oochi  , Kengo Aoyama  and Akira Ueda

Received: 27 November 2019;  Published: 12 February 2020;  doi: 10.21926/jept.2001002

In order to achieve advancement in zero-emission geothermal power generation for fixing the CO2 in the geothermal fluids to the carbonate minerals after binary power generation and reinjection of the fluid into the reservoir, batch-type experiments and geochemical simulations of CO2-andesitic pyroclastic rock interaction (tuff from Oku-Aizu geothermal area) were performed at 150 °C with and without CO2 gas for 15 days. Despite the low Ca content (0.9% wt.%) in the rock, the Ca2+ concentrations in the solutions [...]

by Chenchang Li  , Jianqiang Hu  , Jie Yu  , Jieci Xue  , Runze Yang  , Yijie Fu  and Bo Sun

Received: 23 April 2021;  Published: 15 July 2021;  doi: 10.21926/jept.2103033

Due to the uncertainty and volatility of wind speed, its natural output power also exhibits strong volatility. In order to avoid the negative effects of the excessive fluctuation of the output power of wind turbines in the wind farm and the power grid, it is very important to accurately predict and reasonably plan and control the output power of the wind farm. Model predictive control (MPC) is a type of advanced control method that can deal with a multi-input multi-output nonlinear system. Compared to the tradition [...]

by Fabien Leurent

Received: 10 March 2022;  Published: 18 July 2022;  doi: 10.21926/jept.2203025

The carbon footprint of motorized transport modes per unit length traveled encompasses the unit share of the vehicle lifetime emissions, that of the transport infrastructure, and those of the motor energy, considered both from “well to tank” and from “tank to wheel”. In the active modes of transport, i.e., walking and cycling, the counterpart of motor energy is human energy, which is associated with two kinds of carbon flows: the carbon footprint of food intake, – which we call the Food to Body component – and the [...]

by Oscar Daoura  , Maya Boutros  and Franck Launay

Received: 01 September 2020;  Published: 26 January 2021;  doi: 10.21926/jept.2101007

CO2 reforming of CH4, also referred to as the Dry Reforming of Methane (DRM), is considered an excellent method to produce H2 and CO (syngas), which are known to be used for the production of higher alkanes and oxygenates. Despite nickel’s moderate toxicity, Ni-based heterogeneous catalysts are considered excellent candidates for use in DRM due to their reasonable performances and economic advantages. However, these materials also present severe drawbacks, such as sintering of the active phase and coke (carbo [...]

by Aditya Sharma  , Opeyemi Bello  , Catalin Teodoriu  and Hamidreza Karami

Received: 15 February 2021;  Published: 30 June 2021;  doi: 10.21926/jept.2102030

The Industry 4.0 is here, and advanced technologies are widely available for domains such oil and gas which are traditionally slow in adopting extreme new technologies. This paper presents the design architecture and implementation of effective data acquisition (DAQ) and monitoring system applied to an experimental sucker rod pumping unit for both event occurrence and educational purpose using latest technological advancements and industry 4.0 principles. The designed framework allows control and monitoring of anal [...]

by Babkir Ali

Received: 23 May 2019;  Published: 23 July 2019;  doi: 10.21926/jept.1903001

This paper is intended to evaluate the economic viability of producing solar photovoltaic modules in Sudan. The simple payback period and the net present value were used as economic indicators to study comparatively different annual production capacities. Initial and operating costs were developed and analyzed for the product lifecycle. The number of working shifts in the base case is doubled to achieve a production rate of 20 MW/year and double shift with double quantity of machines is executed to reach a producti [...]

by Hironari Minami  , Hiroaki Izumi  , Takumi Hasegawa  , Fan Bai  , Daisuke Mori  , Sou Taminato  , Yasuo Takeda  , osamu yamamoto  and Nobuyuki Imanishi

Received: 30 June 2021;  Published: 23 September 2021;  doi: 10.21926/jept.2103041

Rechargeable batteries with higher energy and power density exceeding the performance of the currently available lithium-ion batteries are suitable for application as the power source in electric vehicles (EVs). Aqueous lithium-air batteries are candidates for various EV applications due to their high energy density of 1910 Wh kg-1. The present study reports a rechargeable aqueous lithium-air battery with high power density at room temperature. The battery cell comprised a lithium anode, a non-aqueous anode electro [...]

by Rui Wang  , Omar M. Basha  , Husain E. Ashkanani  , Bingyun Li  and Badie I. Morsi

Received: 19 August 2024;  Published: 21 November 2024;  doi: 10.21926/jept.2404022

CO2 capture processes using five chemical solvents were modeled in Aspen Plus V.12.1 for the capture of over 90% CO2 from a 456 ton/hour split flue gas stream containing 12.02 mol% CO2 emitted by the Longview 780 MW power plant (West Virginia, USA). Since the flue gas contained 33.10 ppmv SO2 and 35.47 ppmv NO2, a gas polishing process, using deionized water (DIW), was included in the model for complete scrubbing of SO2 and NO2 from the raw flue gas before the CO2 capture process. The five chemicals used for CO2 ca [...]

by Elysa Nensy Irawan  , Sandro Sitompul  , Ken-Ichiro Yamashita  and Goro Fujita

Received: 05 October 2022;  Published: 02 January 2023;  doi: 10.21926/jept.2301001

This research aims to know the effect of the Rotor Radius Ratio on the performance of the hybrid Vertical Axis Wind Turbine Savonius-Darrieus NREL S809 model using the Computational Fluid Dynamics method. Two-bladed Savonius is used as an internal rotor, and three-bladed Darrieus NREL S809 as an external rotor. Turbine model performance is analyzed through the value of the Moment Coefficient and Power Coefficient. The result shows that the increase in the Rotor Radius Ratio value causes an increase in the initial M [...]

by Lucy Wyatt

Received: 24 November 2020;  Published: 22 January 2021;  doi: 10.21926/jept.2101005

This paper presents the case for the use of HF radar to provide wave, current and wind measurements and maps during the surveying, resource and impact assessment, construction, maintenance and performance assessment phases of an offshore fixed or floating wind farm or other marine renewable project. The data presented are from the Celtic Sea which is currently the focus of a lot of offshore wind interest. The data are from a dual radar system deployed at the Wave Hub site off the Cornwall coast since 2011, a single [...]

by Tanja Radu  , Vincent Smedley  , Dipti Yadav  , Richard Blanchard  , Sheik Aminur Rahaman  , P. Abdul Salam  and Chettiyappan Visvanathan

Received: 21 September 2022;  Published: 28 November 2022;  doi: 10.21926/jept.2204039

The implementation of community-level de-centralised anaerobic digestion (AD) systems offers a sustainable solution for organic waste management and energy provision, but there is currently a need for low-cost methods of system control and management at this scale. The problem becomes accentuated with increasing deployment, as greater complexities are created by the need to both monitor and control a wider network of smaller, community-scale plants. This paper describes research to design, deploy and test such a sy [...]

by Agnes C. Nkele  , Imosobomeh L. Ikhioya  , Chinedu P. Chime  and Fabian I. Ezema

Received: 29 May 2023;  Published: 18 July 2023;  doi: 10.21926/jept.2303024

In recent times, renewable energy resources have been greatly researched because of the increasing concern to minimize global warming and meet energy demands. Energy storage systems have become useful tools for sustainability and meeting energy needs. Solar energy has proven in recent times to be the primary and most prevalent option due to its environmental friendliness, availability, and minimal pollution. Effective utilization of available energy resources has led to developing new alternative energy devices lik [...]

by Babkir Ali

Received: 30 May 2019;  Published: 07 August 2019;  doi: 10.21926/jept.1903002

The main objective of this paper is to study the sustainability of power generation from an abandoned oil and gas well in the province of Alberta, Canada. Economic and environmental indicators were used for the sustainability assessment. A conceptual design for a pilot plant was developed, and the main parameters were determined. An abandoned oil and gas well represents the thermal power source through circulating water into an organic Rankine cycle (ORC) unit to generate electricity. The thermal power is extracted [...]

by Peter Leary  , Peter Malin  , Graeme Saunders  and Charles Sicking

Received: 03 December 2019;  Published: 29 July 2020;  doi: 10.21926/jept.2003012

A core feature of convective geothermal resource production is wellbore energy flow Q ~ ρC x T x V. E.g., for wellbore fluid of volume heat capacity ρC ~ 4.3MJ/m3.oC, temperature T ~ 230oC, and volumetric flow V ~ 50L/s, wellbore heat energy production is Q~ 50MWth ~ 5MWe. Wellbore fluid flow V =2πr0ϕv0ℓ for open wellbore length ℓ is given in turn by the spatially variable product crustal porosity times crustal fluid velocity v ≡ ϕv0 at the wellbore rad [...]

by Ibikunle Olalekan OGUNDARI

Received: 08 September 2022;  Published: 03 April 2023;  doi: 10.21926/jept.2302013

This study examined the techno-economic specifications for a Waste-to-Suburban Cooking Energy critical infrastructure project in Southwestern Nigeria. Technological and project economic data for the W2E project were obtained from strategic sources and energy project foresight/analysis framework used. The results showed residential upgraded biogas-for-cooking demand of approximately 10,243 m3/month, and municipal solid waste (MSW) input of approximately 80 tonnes/month. The planned biogas plant had estimated costs o [...]

by Hironori Takagi  , Koichi Kakimoto  , Daishuke Mori  , Sou Taminato  , Yashuo Takeda  , osamu yamamoto  and Nobuyuki Imanishi

Received: 12 January 2021;  Published: 24 February 2021;  doi: 10.21926/jept.2101010

The demand for high energy density rechargeable batteries beyond lithium-ion batteries has increased for electric vehicles. In the present study, a novel high energy density rechargeable aqueous lithium battery was proposed. The battery was composed of a lithium metal anode, a lithium-stable non-aqueous electrolyte, a water-stable lithium-ion conducting solid electrolyte of Li1.4Al0.4Ge0.2Ti1.4(PO4)3-epoxy-TiO2 separator, and a hydroquinone sulfonic acid (HQS)/benzoquinone sulfonic acid (BQS) redox couple in an aqu [...]

by Xiang Li  , Yuan Xue  , Ryan Dehoff  , Costas Tsouris  and Patricia Taboada-Serrano

Received: 09 April 2020;  Published: 09 May 2020;  doi: 10.21926/jept.2002007

Hierarchically-structured, electro-catalysts consisting of a titanium core with controlled macro-porosity and a thin titania surface-layer with controlled nano-porosity were synthesized via combination of additive manufacturing and in-situ anodization. The electrodes were tested for hydrogen evolution reaction and depicted competitive electro-catalytic activities, with Tafel slopes between 40 and 56 mV dec-1. The electrodes also depicted competitive onset and over potentials when compared with other electrode alter [...]