by Paul O'Hara

Received: 20 December 2023;  Published: 03 June 2024;  doi: 10.21926/rpm.2402012

The spin-statistics theorem is generalized to include quantum entanglement. Specifically, within the context of spin entanglement, we prove that isotropically spin-correlated (ISC) states must occur in pairs. This pairing process can be composed of parallel or anti-parallel states. Consequently, the article proposes using ISC states as a unifying principle to explain better Bose-Einstein condensates, the theory of superconductivity, and molecular and atomic orbitals, all of which involve a pairing process. The theo [...]

by Kianoush Hatami Dehnou  and Mohammad Jafar Hadianfard

Received: 14 December 2023;  Published: 03 May 2024;  doi: 10.21926/rpm.2402011

The use of silicone rubber as an implant is limited due to its weak properties. In this study, the impact of various reinforcements, such as TiO2 or SiO2 nanoparticles, carbon, or polypropylene fiber micro reinforcements, on the mechanical, thermal, and viscoelastic properties of silicone rubber composites with RTV-4125 matrix was investigated. The composites were evaluated through several tests, including tensile, compression, FTIR, TGA, DMTA, and water adsorption tests. It was found that the composites' tensi [...]

by Zongqi Guo  and Wenxu Wei

Received: 12 January 2024;  Published: 12 April 2024;  doi: 10.21926/rpm.2402010

Ceramic bonds are conventionally formed during the burning of refractory bricks and by using pre-fabricated blocks or monolithic lining, which is characterized as the coalescence of the particles by liquid sintering. However, the whisker bond was discovered with the outstanding performance of unburnt periclase–spinel–Al bricks while substituting magnesia–chrome bricks in the chromium-free campaign of refractory lining of RH degassers. Thanks to the prominent effect of the whisker bond, such a refr [...]

by Xinran Lv  , Ziqiang Yin  , Zhigang Yang  , Junshuai Chen  , Shen Zhang  , Shaolei Song  and Gang Yu

Received: 02 January 2024;  Published: 03 April 2024;  doi: 10.21926/rpm.2402009

Titanium diboride (TiB2) materials have garnered significant attention due to their remarkable comprehensive properties. They offer potential applications in high-temperature structural materials, cutting tools, armor, electrodes for metal smelting, and wear-resistant parts. However, due to the low self-diffusion coefficient, the TiB2 exhibits poor sinterability, excessive grain growth at elevated temperatures, and inadequate oxidation resistance, limiting its wide application. Therefore, many research works are de [...]

by Alhayat Getu Temesgen  , Ömer Fırat Turşucular  and Elif Dicle Turşucular

Received: 12 December 2023;  Published: 15 March 2024;  doi: 10.21926/rpm.2401008

This mini-compilation study included the chemical structure, mechanical, thermal, and dimensional properties of silk fiber, its production process, pre-treatment, and biomedical applications from various experimental studies, which are compiled and summarized. The silk fiber should have a degumming process before using biomedical applications. The 25% concentration for Na2CO3 in ethanol solution (80%) as a coagulant chemical with a salt such as LiB2 (9 M) at a temperature of 98°C for 45 minutes at pH between 6 [...]

by Jeronimo Kreiker  , Melina Gomez  , Lucas Peisino  , Nelio Ochoa  and Belen Raggiotti

Received: 18 October 2023;  Published: 15 March 2024;  doi: 10.21926/rpm.2401007

It is possible to revalue the plastic fraction from WEEE using it as a recycled aggregate (RA) in cement mortars. However, this feasibility depends on elaborating a granular material via a core-shell strategy to stabilize the potential contaminants. The core is a plastic particle, and the shell is a cement, fillers, and activated carbon mixture. Due to the hydrophilic characteristics of the shell and the presence of interstitial sites generated by the use of the RA, it is necessary to study the wetting properties o [...]

by John Hanna

Received: 30 April 2023;  Published: 21 February 2024;  doi: 10.21926/rpm.2401006

The main weakest point of concrete is its exposure to cracks, and concrete structure repair is expensive, especially for infrastructure maintenance, which is difficult to access. The ability of self-healing concrete (SHC) to successfully heal fractures without the assistance of humans has received much attention since it increases operational life and lowers maintenance expenses. This paper reviews various techniques and technologies of autogenous and autonomous self-healing concrete. Much more attention is given t [...]

by Spiros Koutandos

Received: 21 October 2023;  Published: 07 February 2024;  doi: 10.21926/rpm.2401005

In this paper, we continue our previous work by discussing the consequences of curvature in spacetime caused by the presence of mass and the implications of this. We address the question raised by Dirac regarding the impact of a magnetic monopole on the quantum world. We discuss quantization concerning the solid angles observed, which may have a connection with a magnetic monopole.

by Angelo Plastino  , Diana Monteoliva  and Angel Ricardo Plastino

Received: 14 October 2023;  Published: 06 February 2024;  doi: 10.21926/rpm.2401004

Collective effects are a typical nuclear feature that refers to the behavior of a group of N fermions (protons and neutrons) within the atomic nucleus. Our interest lies in light nuclei only. Thus, we consider here, using the Lipkin model, a small-N fermion system at low-temperature T and discover -collective phenomena. Our fermion-model simplicity allows one to gain insight into collective fermion behavior. We focus attention, for N<20, on several quantifiers. These include standard ones related to thermal [...]

by E. García – Quismondo  and A. Guillermo Bracamonte

Received: 14 October 2023;  Published: 31 January 2024;  doi: 10.21926/rpm.2401003

This communication was brief to show how high conjugated carbon-based structures and carbon allotropes could participate as electron shuttles, semiconductors, quantum emitters, and Optoelectronic processors within confined nanostructured organized systems. In particular, it was focused on nanoassemblies such as vesicles, micelles, and lipidic nanoparticles and incorporated insights from other types of nanomaterials that could afford to develop new organized systems. In these cases, the term organized system was use [...]