by Junmo Moon  , Satita Thiangtham  , Ruijie Zheng  , Sicheng Liu  , Chayanaphat Chokradjaroen  , Yasuyuki Sawada  and Nagahiro Saito

Received: 04 December 2022;  Published: 20 February 2023;  doi: 10.21926/jept.2301010

Crystalline lithium fluoride (LiF) has been intensively pursued as potential alternative solid electrolytes (SEs) owing to its excellent chemical and electrochemical oxidation stability, and good deformability. However, due to its low ion conductivity, LiF is still challenging for practical SE applications. Herein, Li-Zr-F composite-based SE by liquid-mediated synthesis is proposed to be studied. methanol (CH3OH) was mainly evaluated as a liquid-mediated precursor for synthesizing Li-Zr-F composites under the stoic [...]

by Arianna Massaro  , Ana B. Muñoz-García  , Mariarosaria Tuccillo  , Michele Pavone  and Pier Paolo Prosini

Received: 02 November 2020;  Published: 10 June 2021;  doi: 10.21926/jept.2102022

The current state-of-the-art quantum mechanics methodologies were applied to derive information on the bulk and surface properties of the P2-type layered oxide Na0.85Li0.17Ni0.21Mn0.64O2 (NLNMO), a cathode material. The special quasi-random structure (SQS) approach was employed to identify the arrangement of Li, Ni, and Mn ions in a supercell containing 115 atoms. Both the cell parameters and atomic positions were determined from DFT-PBE+U calculations to highlight specific distortions induced by the dopants (Ni an [...]

by F.A Hamad  , E. Emenike  , Abbas Mohammed  , S. Gooneratne  and P. Russell

Received: 01 December 2020;  Published: 31 January 2021;  doi: 10.21926/jept.2101009

In this paper, the primary aim is to look at the fundamental melting/solidification processes of polyethylene glycol 1500 (PEG 1500) for energy storage - insulation to prolong the cooling time of pipelines in unexpected shut-down conditions, prevent/minimize the wax deposition, and hydrate formation. Polyethylene glycol 1500 was selected because its melting temperature is >317 K making it a suitable candidate as lagging material to prevent wax deposition and hydrate formation in subsea oil pipelines. Experim [...]

by Najmul Hoque  , Wahidul Biswas  , Ilyas Mazhar  and Ian Howard

Received: 29 June 2020;  Published: 31 July 2020;  doi: 10.21926/jept.2003013

Hydrogen is regarded as a potential solution to address future energy demands and environmental protection challenges. This study assesses the triple bottom line (TBL) sustainability performance of hydrogen as an automotive fuel for Western Australia (WA) using a life cycle approach. Hydrogen is considered to be produced through water electrolysis. Two scenarios, current grid electricity and future renewable-based hydrogen, were compared with gasoline as a base case. The results show that locally produced grid elec [...]

by Han Zhang  and Joseph D. Smith

Received: 09 November 2020;  Published: 30 January 2021;  doi: 10.21926/jept.2101008

Solar thermochemical reactor provides an attractive approach that utilizes the most common solar radiation as the thermal driving force to motivate the reaction between CO2 and metal oxides, which is also called metal oxide redox pair-based thermochemical cycles. The CeO2/CeO2-δ is widely used in the two-step redox process due to its advantages including fast-redox kinetics, high crystallographic stability of a wide range of reacting oxygen non-stoichiometry, and relatively high oxygen solid-state conductivit [...]

by Chaonan Zhang  , Robert Fuller  and Iyad Hijazi

Received: 10 November 2020;  Published: 25 January 2021;  doi: 10.21926/jept.2101006

The Pd-H system has attracted extensive attention. Pd can absorb considerable amount of H at room temperature, this ability is reversible, so it is suitable for multiple energy applications. Pd-Ag alloys possess higher H permeability, solubility and narrower miscibility gap with better mechanical properties than pure Pd, but sulfur poisoning remains an issue. Pd-Cu alloys have excellent resistance to sulfur and carbon monoxide poisoning and hydrogen embrittlement, good mechanical properties, and broader temperature [...]

by Peter Leary  , Peter Malin  , Graeme Saunders  and Charles Sicking

Received: 03 December 2019;  Published: 29 July 2020;  doi: 10.21926/jept.2003012

A core feature of convective geothermal resource production is wellbore energy flow Q ~ ρC x T x V. E.g., for wellbore fluid of volume heat capacity ρC ~ 4.3MJ/m3.oC, temperature T ~ 230oC, and volumetric flow V ~ 50L/s, wellbore heat energy production is Q~ 50MWth ~ 5MWe. Wellbore fluid flow V =2πr0ϕv0ℓ for open wellbore length ℓ is given in turn by the spatially variable product crustal porosity times crustal fluid velocity v ≡ ϕv0 at the wellbore rad [...]

by Kosmas A. Kavadias  and Stefanos Tzelepis

Received: 03 June 2020;  Published: 24 July 2020;  doi: 10.21926/jept.2003011

The fluctuations in the cost of energy coupled with the gradual decrease in natural resources (i.e., oil, natural gas, coal) and the environmental issues caused by the extensive use of fossil fuels, demand the urgent need for the development of advanced and clean energy systems. The European Union has requested new measures to target climate and energy deterioration by developing renewable energy sources by 2030. The stochastic character of the energy sources and the fluctuation in demand for the energy systems pos [...]

by Babkir Ali

Received: 23 May 2019;  Published: 23 July 2019;  doi: 10.21926/jept.1903001

This paper is intended to evaluate the economic viability of producing solar photovoltaic modules in Sudan. The simple payback period and the net present value were used as economic indicators to study comparatively different annual production capacities. Initial and operating costs were developed and analyzed for the product lifecycle. The number of working shifts in the base case is doubled to achieve a production rate of 20 MW/year and double shift with double quantity of machines is executed to reach a producti [...]

by Babkir Ali

Received: 30 May 2019;  Published: 07 August 2019;  doi: 10.21926/jept.1903002

The main objective of this paper is to study the sustainability of power generation from an abandoned oil and gas well in the province of Alberta, Canada. Economic and environmental indicators were used for the sustainability assessment. A conceptual design for a pilot plant was developed, and the main parameters were determined. An abandoned oil and gas well represents the thermal power source through circulating water into an organic Rankine cycle (ORC) unit to generate electricity. The thermal power is extracted [...]