by Cherechi Ndukwe  , M. Tariq Iqbal  and Jahangir Khan

Received: 16 November 2021;  Published: 17 February 2022;  doi: 10.21926/jept.2201007

SCADA provides real-time system monitoring by constant communication and data exchange between various system devices to achieve data visualization and logging. Presently, in industrial systems, commercial SCADA systems are being used for data monitoring and control. These systems can be expensive, and as such can only be afforded by select industries. Even at these costs, the commercial SCADA systems face some challenges, which include interoperability and scalability issues. Research has shown that these problems [...]

by Zeel Maheshwari  and Rama Ramakumar

Received: 29 August 2021;  Published: 21 January 2022;  doi: 10.21926/jept.2201006

Rural and remote communities are more vulnerable to damage caused by extreme events as compared to urban areas. Natural disasters can disrupt basic supplies such as domestic water supply and cooking needs in addition to electricity outages. The recognition of the interlinked nature of food, water and energy has gained momentum over the past few years. Smart Integrated Renewable Energy System (SIRES) has been proposed to handle basic needs such as cooking, domestic and irrigation water supply, and electricity to rem [...]

by Marzouk lajili

Received: 05 November 2021;  Published: 19 January 2022;  doi: 10.21926/jept.2201005

The emission of greenhouse gases, specifically CO2, has reached non-acceptable levels causing global warming with adverse effects. Owing to rigorous ongoing research, these harmful substances might be converted to beneficial sources. The main objective of this study was to review the most effective processes that might utilize carbon dioxide to produce various substances, chemicals, and energy. For this, different existing and projected short-term and long-term strategies have been presented and discussed. Specific [...]

by Saikat Banerjee  , Naveen Prasad  and Sivamani Selvaraju

Received: 27 September 2021;  Published: 13 January 2022;  doi: 10.21926/jept.2201004

Biogas is an alternative to gaseous biofuels and is produced by the decomposition of biomass from substances such as animal waste, sewage sludge, and industrial effluents. Biogas is composed of methane, carbon dioxide, nitrogen, hydrogen, hydrogen sulfide, and oxygen. The anaerobic production of biogas can be made cheaper by designing a high throughput reactor and operating procedures. The parameters such as substrate type, particle size, temperature, pH, carbon/nitrogen (C/N) ratio, and inoculum concentration play [...]

by Raisa Barbosa  , Mohamad Issa  , Sidelmo Silva  and Adrian Ilinca

Received: 30 July 2021;  Published: 13 January 2022;  doi: 10.21926/jept.2201003

A substantial share of the electric energy is generated with synchronous generators that provide sustained alternating current (AC) voltage and frequency energy to regional and national power systems, which subsequently transport and distribute it to diverse users. In an attempt to reduce environmental effects, electric energy markets have recently become more open, resulting in more flexible distributed electric power systems. In such distributed systems, stability, quick and efficient delivery, and control of ele [...]

by Shuvajit Ghosh  , Udita Bhattacharjee  , Subhajit Bhowmik  and Dr. Surendra K. Martha

Received: 30 June 2021;  Published: 10 January 2022;  doi: 10.21926/jept.2201002

lithium-ion battery (LIB) is at the forefront of energy research. Over four decades of research and development have led electric mobility to a reality. Numerous materials capable of storing lithium reversibly, either as an anode or as a cathode, are reported on a daily basis. But very few among them, such as LiCoO2, lithium nickel manganese cobalt oxide (Li-NMC) variants (LiNi0.33Mn0.33Co0.33O2, LiNi0.5Mn0.3Co0.2O2, LiNi0.6Mn0.2Co0.2O2, and LiNi0.8Mn0.1Co0.1O2), LiNi0.8Co0.15Al0.05O2, LiFePO4, graphite, and Li4Ti5 [...]

by Journal of Energy and Power Technology Editorial Office

Received: 05 January 2022;  Published: 06 January 2022;  doi: 10.21926/jept.2201001

The editors of Journal of Energy and Power Technology would like to express their sincere gratitude to the following reviewers for assessing manuscripts in 2021. We greatly appreciate the contribution of expert reviewers, which is crucial to the journal's editorial process. We aim to recognize reviewer contributions through several mechanisms, of which the annual publication of reviewer names is one. Reviewers receive a voucher entitling them to a discount on their next LIDSEN publication and can download a cer [...]

by Tran X Phuoc  and Mehrdad Massoudi

Received: 28 October 2021;  Published: 22 December 2021;  doi: 10.21926/jept.2104050

To store CO2 in geological reservoirs, expansion valves have been used to intentionally release supercritical CO2 from high-pressure containers at a source point to lower-pressure pipelines and transport to a selected injection site. Using expansion valves, however, has some shortcomings: (i) the fluid potential, in the form of kinetic energy and pressure which can produce mechanical work or electricity, is wasted, and (ii) due to the Joule-Thomson cooling effect, the reduction in the temperature of the released CO [...]

by Abdul G. Khan

Received: 22 July 2021;  Published: 14 December 2021;  doi: 10.21926/jept.2104049

There is growing concern for the contamination of our soils and waters worldwide with heavy metals (HMs), as a result of indiscriminate use of agrochemicals for feeding growing population which require optimal use of resources and sustainable agricultural strategies. This can be simultaneously achieved by using microbes as bio-fertilizers, bio-protectants, and bio-stimulants, and suitable phytoremediation- plant capable of removing heavy metals contaminants from contaminated sites. There is a growing need to adopt [...]

by Abdullah Abbas Kendoush

Received: 04 October 2021;  Published: 07 December 2021;  doi: 10.21926/jept.2104048

By the adoption of a drag-buoyancy equality model, analytical solutions were obtained for the drag coefficients (CD) of Taylor bubbles rising steadily in pipes. The obtained solutions were functions of the geometry of the Taylor bubble and the gas volume fraction. The solutions were applicable at a wide range of Capillary numbers. The solution was validated by comparison with experimental data of other investigators. All derived drag formulas were subject to the condition that Bond number >4, for air-water syste [...]