by Abolfath Askarian Khoob  , Mohammad Javad Ramezani  and Seyed Sina Mousavi

Received: 16 June 2022;  Published: 12 May 2023;  doi: 10.21926/rpm.2302021

This study intends to determine the behavior of glass laminate aluminum-reinforced epoxy (GLARE) and glass fiber-reinforced polymer (GFRP) composites under a low-velocity impact test. Experimental tests and numerical simulations are considered for this investigation. All samples are made by the hand lay-up method. Moreover, specimens are produced with a 7075-T6 aluminium sheet with a 0.5 mm thickness, resin 3001, and E-glass fiber. The drop weight test performs the low-velocity impact at 6.7 J and 10 J impact energ [...]

by Aadharshini Ganesh  , Nisha Gupta  , Prosenjit Saha  and Pallab Bhattacharya

Received: 31 January 2023;  Published: 08 May 2023;  doi: 10.21926/rpm.2302020

Energy storage devices (ESD) including batteries, and supercapacitors are becoming progressively imperative in the transition to a renewable energy future, as they enable the integration of intermittent renewable sources into the grid and provide backup power during outages. There are already reviews available on various energy storage materials and systems. However, the challenges in the choice of suitable materials and fabrication technology are yet to establish for the commercialization of affordable and efficie [...]

by C. Shawn Sun  , Nahid Farzana  , Dinesha Kuruppuarachchi  , Mohammadamin Azimi  and Huayuan Zhong

Received: 10 September 2022;  Published: 04 May 2023;  doi: 10.21926/rpm.2302019

Infrastructure degradation attributable to concrete deterioration and corrosion of reinforcing steel has been a long-standing challenge to the owners and engineers. This problem becomes more evident when concrete structures are subject to aggressively corrosive environments. The use of advanced materials such as ultra-high performance concrete (UHPC) and carbon fiber reinforced polymer (CFRP) bars has a strong potential to overcome this challenge and help build new infrastructure that is durable and sustainable. Ho [...]

by Krzysztof Wierzcholski  and Jacek Gospodarczyk

Received: 26 April 2023;  Published: 27 April 2023;  doi: 10.21926/rpm.2302018

CorrectionCorrection: Non Solved Contemporary Scientific Problems of Non-Conventional Bio-Surfaces Lubrication. Recent Progress in Materials 2023; 5(1): 013Krzysztof Wierzcholski *, Jacek GospodarczykWSG Bydgoszcz University Garbary 2, Bydgoszcz, Poland; E-Mails: Krzysztof.wierzcholski@wp.pl; jacek.gospodarczyk@byd.pl* Correspondence: Krzysztof Wierzcholski; E-Mail: Krzysztof.wierzcholski@wp.plAcademic Editor: Hossein HosseinkhaniSpecial Issue: Non-Conventional Hydrodynamic Lubrication for Biological and Mechanic [...]

by Dipti Nikam  and Abbas S. Milani

Received: 05 May 2022;  Published: 24 April 2023;  doi: 10.21926/rpm.2302017

This study evaluates the influence of different loading angles and the area of loading on the ensuing stress distribution and the physical response of a natural central incisor tooth, using a 3D finite element analysis. The CAD model of the incisor tooth assembly (including enamel, dentin, periodontal ligament, pulp, gingiva and jaw bone) was subject to an external (chewing) load of 100 N, over four different areas and at four different angles along the vertical. It was observed that the tooth experiences high von- [...]

by Amir Mahboob  , Omid Hassanshahi  , Abdulqaiyoum Hakimi  and Mohammad Safi

Received: 02 March 2023;  Published: 19 April 2023;  doi: 10.21926/rpm.2302016

The largest proportion of the material used in multistory buildings, and thus its carbon impact, is attributed to their slabs being the main contributor of weight. Because of their high strength and concrete self-weight reduction, composite beams with hollow-core slabs were created for their technical and economic benefits, making this system inexpensive and with a reduced environmental impact, thereby lowering carbon emissions. Geometrically, the hollow slab has a sequence of T and L form pieces on both sides. Hol [...]

by Mohammed Naveed

Received: 22 December 2022;  Published: 12 April 2023;  doi: 10.21926/rpm.2302015

Composite materials with aluminum as matrix material have a wider amplitude of large-scale applications in engineering. Some salient features of aluminum matrix composites are, low density, low thermal coefficient of performance and low weight and high strength. Among the various series of aluminum alloy, Al6061 have been widely used by researchers due to its outstanding properties particularly as they are heat treatable. Aluminum 6061 alloys have been reinforced with various particulate reinforcements such as sili [...]

by Kikuko Hayamizu  , Tomoyuki Haishi  , Yasuhiko Terada  , Kunimitsu Kataoka  and Junji Akimoto

Received: 24 January 2023;  Published: 03 April 2023;  doi: 10.21926/rpm.2302014

Pulsed field-gradient (PFG) NMR spectroscopy was applied to thin disk samples (0.5, 1 and 2 mm thick, 4 mm diameter) of LLZO-Ta (Li6La3Zr1.5Ta0.5O12) single crystal. We have measured the diffusion of 7Li in thin pellets (0.5 to 3 mm thick) of NASICON-type LAGP powder and found that the Li+ diffuses preferentially in the thicker direction. In this study, we placed 1 mm thick, 4 mm diameter disk-shaped single crystals vertically, i.e., parallel to the PFG direction. We found that 7Li ions diffuse similarly as in rod- [...]

by Krzysztof Wierzcholski  and Jacek Gospodarczyk

Received: 19 December 2022;  Published: 27 March 2023;  doi: 10.21926/rpm.2301013

This paper presents new non solved, scientific research directions and their applications in contemporary non-conventional lubrication problems of the bio-surfaces domain. Here are described new research scientific trends and research problem solutions of hydrodynamic lubrication for living tissue, human skin and human cartilage joints surfaces. At first in introduction is described the state of the art, a new purpose of anticipate research and the bio-tribology connections with other scientific domains are documen [...]

by Suhail Hyder Vattathurvalappil  , Syed Fahad Hassan  and Mahmoodul Haq

Received: 24 January 2023;  Published: 16 March 2023;  doi: 10.21926/rpm.2301012

Thermoplastics polymers like Acrylonitrile Butadiene Styrene (ABS) are often reinforced with nano/micro reinforcements to enhance their mechanical, thermal and electrical properties. However, the viscoelastic nature of these polymers results in their strong dependence on the applied strain rate and temperature sensitivity, leading to their characterization complexity. Hence it is paramount to study the strain rate-dependent mechanics of neat ABS. In this study, the effect of strain rate and temperature on Young’s m [...]