TY  - JOUR
AU  - Silva, Clara L.
AU  - Miranda, Bárbara H.S.
AU  - Vilela, Maria L.
AU  - Rodrigues, Jair F.
AU  - Cunha, Thainá G.
AU  - Dias, Jhonatan A.
AU  - A. Soares, Gabriela
AU  - Freitas, Vinicius
AU  - de Q. Vilaça, Rodrigo
AU  - Wouk, Luana
AU  - Bagnis, Diego
PY  - 2022
DA  - 2022/07/04
TI  - Surface Treatment of Flexible Barrier Film for Improved Stability of Organic Photovoltaic Mini Modules
JO  - Journal of Energy and Power Technology
SP  - 023
VL  - 04
IS  - 03
AB  - The lifetime and stability of organic photovoltaics (OPVs) are the key factors that influence the technology used to scale up and commercialize OPVs. High-performing and reliable devices are used to fabricate the devices of choice. Materials and methods that can be used to prevent the degradation of organic materials, enabling better OPV applications, are being increasingly researched in recent years. Herein, we present the surface modification process of a commercial, flexible barrier film based on polyethylene terephthalate (PET). A sol-gel deposition method was used to modify the surface. Two scalable coating techniques, spray- and bar-coating, were investigated as the processing methods. Treated films were optically, morphologically, and topologically characterized. The modification of the barrier film surface increased the surface hydrophobicity of the bar-coated and spray-coated treated films. This was validated by the contact angle measurements. OPV roll-to-roll (R2R) mini-modules with 4.2% power conversion efficiency were fabricated and encapsulated with the treated films. The lifetime and stability were assessed by conducting accelerated aging tests based on the ISOS-D-3 protocol. The spray-coating technique provided a more stable layer than the bar-coating technique, and the lifetime of the OPV modules encapsulated in spray-coated treated barrier films was increased. Surface modification has been demonstrated to be a promising approach for not only improving the barrier film properties (resulting in the improved lifetimes of the modules) but also reducing the extents of reflectance losses in the OPV modules post encapsulation.
SN  - 2690-1692
UR  - https://doi.org/10.21926/jept.2203023
DO  - 10.21926/jept.2203023
ID  - Silva2022
ER  -